7/7/2009· Design
White Paper: Reverse Engineering
By: Dr. Thomas Read
Before expending the effort necessary to reverse engineer a device or object, it must be definite that the object under study is not covered by one or more patents. This avoids a dispute over patent violations. Once it has been established that no patent coverage exists, one can use multiple techniques to reverse engineer a product. These are summarized below:
5/24/2007· Failure Analysis
Failure analysis is conducted to determine the root cause of failure. Sometimes these failures are catastrophic, e.g., Titanic. Other times the failures are a nuisance, e.g., failed o-ring in plastic faucet water valve. In both cases, the component failed unexpectedly, which can result in injury or death, not to mention financial loss due to unscheduled downtime
1/28/2006· Failure Analysis
By: Dr. Thomas Read
Note: Glass Fractography is the most effective method for determining why a glass object, such as a bottle, failed. This technique consists of examining the fracture surfaces of the failure for artifacts such as Wallner lines and using them to trace the crack back to its origin
9/21/2004· Failure Analysis
Contemporary Skin Barrier Wall Design And Water Leakage
For hundreds of years, building walls were constructed of stone or brick and were sometimes several feet thick. Such massive walls served well not only to sup port the floors and roof but also to keep out the weather
by Katherine M. Koppenhaver
by H. Michael Mogil
by Kent Sasse, MD
