banner ad

Motorcycle Accidents Consultants

Sort Non-Featured Profiles by
Check for SynapsUs
Kevin Forcier
Crash Reconstruction Specialist
21632 South Street
P.O. Box 131
Venango PA 16440-0131
USA
phone: 814-398-4173
fax: 814-398-4173
4CA Consulting & Reconstruction is a General Accident Reconstruction Company, providing Expert Services in the field of Accident Reconstruction, including:
  • A complete an unbiased accident investigation, using the latest investigative means such as Crash Data Retrieval & Analysis.
  • Crash Scene Analysis and Documentation: Vehicles, light trucks, motorcycles.
  • Seat Belts and Child Safety-Seats usage analysis
  • Occupant injury kinematics, speed determination, time - distance, drag factor with use of Vericom Vehicle Computer System.
  • Traffic Studies.
  • Crash Animation / Simulation, Map scenes, Crash Zone, CAD.
About Kevin Forcier: ACTAR Certified Reconstructionist: #2054. Retired from the Pennsylvania State Police in April of 2010 after 25 years of service. Accident Reconstructionist since 1990, last four years as a full time Crash Analysis and Reconstruction Specialist responsible for the coverage of 3300 square miles of Northwestern Pennsylvania. Qualified Expert Witness in the field of Crash Reconstruction and related services.
Check for SynapsUs
Peter J. Sullivan
5380 W. 34th St., Ste. 347
Houston TX 77092
USA
phone: 281-734-7222
Advanced-Analysis-Associates-Logo.jpg
Brief Introduction

Peter James Sullivan

Automotive, Truck, Motorcycle, ATV, Heavy Industrial Equipment, and Marine Industries Consultant Mechanical, Electronic, Brake, Steering, and Systems Performance Testing & Analysis


Summary

PROFESSIONAL SUMMARY
  • Bachelor of Science (Chemistry and Physics) from Texas State University, 1984
  • World Class Certified ASE Technician, ASE Certified Master Technician in Heavy Duty Truck, Passenger Car/Light Truck, Collision Repair, and Machinist, (National Institute for Automotive Service Excellence)
  • 36 years of technical, academic, operational, and managerial experience in the private and commercial transportation, heavy equipment, marine, and recreational vehicle industries
  • Extensive experience performing vehicle inspections and downloads of event data recorders and electronically stored information (ESI), including analysis, validation, testing, and preservation on almost all makes and models of vehicles and equipment
  • Authored numerous technical training, operational, and safety manuals, developed diagnostic software, firmware, and hardware for diagnostic tool manufacturers and repair technicians. Developed industry leading shop management software for repair facilities.
  • Primary areas of consultation: mechanical, automotive, CMV/truck, heavy industrial equipment, motorcycle/bicycle, marine, recreational vehicle, collision repair, tire failure analysis, testing and analysis include to include fluids, materials, and component parts, railroad/Hy-Rail, FMCSA/DOT compliance, commercial motor vehicle driver/operator qualification and compliance, job site and transportation safety claims and litigation.
Consultant and Accident Reconstructionist: Responsible for consulting with law firms, corporations, and insurance carriers as an expert witness, providing deposition, and trial testimony. Perform data downloads, including analysis, validation, and electronic testing, on almost all makes and models of vehicles and equipment. Perform accident site and vehicle/equipment inspections, documenting of accident scenes (including rapid-response), reconstruction of accidents, perform compliance audits for FMCSA/DOT/OSHA/ASTM/ANSI/State and Federal codes, statutes, and other safety requirements, the standards of care within the vehicle and equipment inspection, maintenance, service, and transportation industries. Perform product testing, product failure mode and effects analysis, laboratory testing and analysis of fluids, compounds, metals, subsystems and components, product development, heavy industrial equipment testing and analysis, fabrication of demonstrative aids, case/project strategy and management, cost control, professional photography, video, and digital microscopy, chain of custody, evidence preservation, and evidence storage. Experience presenting and testifying at binding arbitration, mediation, and OSHA Abatement Hearings.

Vehicle Event Data Recorder Specialist

Over 30 Years Experience: downloading, analyzing, and correlating data from vehicle electronic control modules. Developed electronic scan tools and data downloading and archiving software. CDR Technican Level 2, data analyst. Specializing in the downloading and hexadecimal translation of many non-supported airbag control modules.

Company Overview
  • LITIGATION AND CLAIMS INSPECTIONS
  • CRASH/ELECTRONIC DATA RECORDER/ECM DOWNLOADS AND ANALYSIS FROM ALL ON-BOARD MODULES, CONTROLLERS, AND GPS/VEHICLE TRACKING UNITS
  • FORENSIC TESTING AND SCIENTIFIC ANALYSIS
  • MOBILE MECHANICAL AND VEHICLE/EQUIPMENT DISASSEMBLY AND INSPECTION
  • EXEMPLAR, FLUID, AND METALLURGICAL TESTING
  • PRODUCT TESTING, PRODUCT DEVELOPMENT, AND PRODUCT DEFECT ANALYSIS
  • WORLD CLASS, HIGHLY DETAILED REVIEW OF VEHICLE MAINTAINCE RECORDS AND DQ FILES
  • COMMERCIAL MOTOR CARRIER SAFETY POLICIES & COMPLIANCE ANALYSIS
  • COMMERCIAL MOTOR VEHICLE DRIVER/OPERATOR QUALIFICATION & COMPLIANCE ANALYSIS
  • DESIGN & FABRICATION OF ACCIDENT MODELS AND DEMONSTRATIVE AIDS
  • RISK ANALYSIS CONSULTING
  • SPECIALIZING IN COMPLEX ELECTRONIC, MECHANICAL, HYDRAULIC, AND ELECTRICAL SYSTEMS, ELECTRONIC THROTTLE CONTROL, ELECTRONIC POWER STEERING CONTROL, DIESEL ENGINE FIRES, VEHICLE FIRES, BRAKE TRANSMISSION INTERLOCK SOLENOID, KEY TRANSMISSION INTERLOCK SOLENOID AND MORE….ALL WITH AN EYE ON COST CONTROL!
View Peter Sullivan's Expert Witness Profile.
Check for SynapsUs
Steven R. Thomas, P.E.
Multiple Addresses (See Below)
NJ, NH, ME, MA, VT ,RI, CT, NY, PA ,DE, USA
phone: 877-267-7855
fax: 973-401-0056 or 603-293-4142
steven_thomas_logo.jpg
New Jersey Office:
PMB 4066
55 Madison Avenue - Ste 400
Morristown, NJ 07960
T: (973) 401-0010
F: (973) 401-0056
New Hampshire Office:
Analytic Engineering
105 Juniper Ridge Road
Gilford, NH 03249
T: (603) 293-4477
F: (603) 293-4142


Analytic Engineering combines Professional Engineering with Effective Communication. We offer Technical Analysis and Services in the Engineering field and provide experienced Expert Testimony to communicate the conclusions reached.

Engineering Services:
  • Mechanical Engineering
  • Safety Engineering
  • Vehicular Accident Reconstruction
  • Failure Analysis
  • Computer Animation
  • Premises Liability
  • Patent Claim Analysis
  • Product Design & Liabilty
  • Product & Equipment
  • Design Engineering Services
  • Steven R. Thomas, PE, the Principal Engineer at Analytic Engineering, earned his Bachelor of Science - Engineering (Mechanical and Electrical) at Widener University, Chester, PA in 1979 and a Master of Science in Engineering Science (Safety Engineering and Human Factors) at The New Jersey Institute of Technology in 1997.

    Professional Experience: Steven R. Thomas, P.E. has worked for such organizations as General Motors, Thomas & Betts, General Cable and Breed Automotive Corporation. He has worked in the engineering fields of Research and Development, Product Design, Machine Design, Manufacturing, Industrial, Tooling, Safety, Facility Design, Failure Analysis and Accident Reconstruction. Since 1991 Mr. Thomas has worked as an Engineering Consultant in the Forensic field and has testified in numerous jurisdictions.
    Check for SynapsUs
    Ralph Aronberg
    P.E., President
    13762 W. State Road 84, Suite 424
    Ft. Lauderdale FL 33325
    USA
    phone: 954-236-6605
    fax: 954-236-3327
    Ralph Aronberg, P.E., has reconstructed over 1,500 accidents and has testified in over 150 jury trials, since founding the firm in 1983. He provides Expert Witness services in the areas of:
  • Traffic accident reconstruction (cars, trucks, motorcycles and pedestrians).
  • Vehicle occupant kinematics (seatbelts)
  • Biomechanics
  • Traffic engineering design (geometrics, signing, markings, signals and lighting)
  • Sight distance analysis
  • Hazardous roadway conditions
  • Work Zone Traffic Control evaluation
  • Evaluation of roadway curvature
  • Traffic signal operations
  • Pedestrian safety
  • Computerized accident reconstruction and simulation
  • Vehicle "black box" data retrieval (certified>
  • Mr. Aronberg is published in the fields of pedestrian / bicycle / motorcycle accident reconstructions, and 3 Dimensional Animations and Scientific Visualizations through the Society of Automotive Engineers. Mr. Aronberg is a Fellow member of the National Academy of Forensic Engineers, and certified as a Diplomat in forensic Engineering.
    Check for SynapsUs
    Iola Goeke
    3660 Hartsfield Road
    Tallahassee, FL 32303

    USA
    phone: 850-558-3100
    fax: 850-575-8454
    bec_consulting_logo.jpg
    BEC Consulting, LLC was established in 1982. Since that time, we have provided top-level consulting engineering services and accident reconstruction to our clients; law firms, insurance companies, state and local agencies, manufacturing companies, and clients who are seeking product design analysis and other engineering related services.

    Our engineers represent a broad range of engineering disciplines which enables us to work on a variety of cases using the team approach. The teams at BEC are comprised of Engineers, Technical Specialists, Graphics Specialists, as well as Research and Administrative Personnel, so that each case is given personal attention and is handled efficiently and effectively. Our offices are located in Tallahassee, Jacksonville and Venice working in almost every state in the United States, including Alaska.

    Areas of Expertise:
    • All Areas of Accident Reconstruction - Including Automobile, Tractor-Trailer, Motorcycle/Bicycle & Pedestrian
    • Engineering Consulting
    • FARO 3-D Scanning
    • Black Box Downloads
    • Construction Zone / Roadside Safety
    • Industrial Equipment
    • Failure Analysis
    • Product Design
    • Product Development
    • Material Handling System
    • Biomechanical Analysis
    • Slip / Trip / Fall
    • Computer Animation, Electronic Graphics
    Every aspect of our firm is designed to serve our clients needs; conference rooms for mediations and depositions, a research and testing lab, secured evidence storage, facilities for expert inspections, and easy access to airport and hotel facilities for our out-of-town clients. We are truly a full service engineering firm.

    Because of this team approach and a commitment to customer service, BEC has attained regional and national recognition as a leader in forensic engineering services and new product development. This excellent example and tireless dedication to serving our client’s needs has resulted in a devoted client base and reputation second to none.

    Dr. Charles Benedict, P.E., founded Benedict Engineering Company in 1982 and our name has since changed to BEC Consulting, LLC. He has over 35 years experience in the fields of product and machine design and analysis, vehicular accident reconstruction of all types, and product and system failure analysis. He has designed, developed, manufactured, and tested more than sixty different products and machine systems. Dr. Benedict is well respected in the fields of forensic engineering, product and machine system design and analysis and patenting.

    Expertise:
    • Biomechanics
    • Occupant Kinematics
    • Vehicle Restraint Systems
    • Vehicle Controllability
    • Material Handling
    • Patent Infringement
  • Automobile Accidents
  • Pedestrian Accidents
  • General Engineering
  • Product Design
  • Fire and Explosion Analysis
  • Tractor / Trailer Accidents
  • Electrical Issues
  • Dr. Brian Pfeifer, P.E., is also a principal with BEC Consulting, LLC, and has been practicing forensic engineering for over 15 years. He holds several patents on roadside safety devices and studied roadside safety at the University of Nebraska. He is a consulting engineer with a strong background in the design, development, and implementation of roadside safety hardware. His current work consists of vehicular accident reconstruction, analysis of maintenance of traffic issues, premises liability, investigation and analysis of mechanical systems and product failures, and development of automated material-handling systems.

    Expertise:
    • Roadside Hazards
    • Vehicle Controllability
    • Occupant Kinematics
    • Roadway Design
    • Guardrails and Bridges
    • Maintenance of Traffic
    • Roadway Design
  • Automobile Accidents
  • Pedestrian Accidents
  • Tractor / Trailer Accidents
  • Slip / Trip / Fall
  • Product Design
  • General Engineering
  • Mrs. Traci Campbell, P.E., CXLT, is an Industrial engineer with specialties in industrial accident reconstruction, including forklifts, construction machinery, appliances, and manufacturing equipment. Her experience includes vehicular accident reconstruction involving automobiles, trucks, tractor-trailers, and recreational vehicles, as well as slip, trip, and fall analysis, product failure analysis, and workplace-safety related issues.

    Expertise:
    • Industrial Accidents
    • Safety Analysis
    • Product Design / Failure Analysis
    • Slip / Trip / Fall
    • Guarding / Warnings
    • Workplace Safety
    • Bicycle Accidents
    • Confined Spaces
  • OSHA Regulations
  • Pedestrian Accidents
  • Automobile Accidents
  • Tractor / Trailer Accidents
  • Human and Environment Interaction
  • Theme Parks / Recreation Facilities
  • Airbag and Black Box
  • General Engineering
  • Mr. Chris Yates, P.E., is a Mechanical engineer and Principal with our firm, specializing in accident reconstruction. His current work involves the analysis and reconstruction of vehicular accidents, including vehicular dynamics and occupant restraint as well as the investigation of industrial accidents and product analysis.

    Expertise:
    • Black Box Analysis
    • Motorcycle / Bicycle Accidents
    • Mechanical Design
    • Product Guarding Design
    • Fire and Explosion
    • Seat Belt Analysis
  • Automobile Accidents
  • Pedestrian Accidents
  • General Engineering
  • Product Design
  • Tractor / Trailer Accidents
  • Slip / Trip / Fall
  • Check for SynapsUs
    Leslie Noel
    Marketing Director
    Corporate Headquarters
    11321 Plantside Drive
    Louisville KY 40299
    USA
    phone: 800-482-5611
    fax: 502-267-6973
    donan_logo.jpg
    Donan Engineering Co., Inc., a family owned company founded in 1947, provides full-service Forensic Engineering and Fire Investigation Services. For over 60 years, Donan Engineering has been providing unbiased answers to their client’s complicated questions. Their team of licensed and experienced forensic experts provides investigative services in the fields of engineering investigations, fire and explosion origin & cause, roofing investigations, and component testing. The diversity of their multidisciplinary staff allows them to provide not only a complete service, but a complete service whose conclusions can be successfully and completely supported.

    Donan Engineering has become a richly diverse, industry leader with over 250 employees operating from 50 offices in 27 states including Alabama, Arkansas, Florida, Indiana, Illinois, Iowa, Kansas, Kentucky, Michigan, Mississippi, Minnesota, Missouri, Ohio, Tennessee, Wisconsin, Georgia, North Carolina, South Carolina, and Pennsylvania, Nebraska, Louisiana, Texas, West Virginia, Virginia, and Oklahoma. Throughout their growth, Donan Engineering has maintained their commitment to providing exceptional customer service, unparalleled quality, unmatched integrity, and timely reporting. Most importantly, they pride ourselves on delivering their clients quality services at an affordable price.

    Services Include:
    Engineering Investigations
  • Bridges
  • Foundations and Basements
  • Geotechnical / Sink Holes
  • Lightning
  • Low and High Voltage
  • Mechanical Systems
  • Retaining Walls
  • Steel Construction
  • Trusses
  • Vehicle Mechanical Studies
  • Vibrations: Earthquakes and Blastings
  • Water Infiltration / Mold
  • Wood Frame Construction

  • Fire / Explosion Origin and Cause
  • Commercial Fires
  • Equipment Fires
  • Vehicle / Residential Fires

  • Roofing Investigations
  • Commercial
  • Residential - Asphalt Shingle
  • Residential - Slate, Tile, Etc.

  • Heavy Trucks
  • Motorcycles
  • Passenger Vehicles
  • 8/21/2017 · Engineering
    Does this sound familiar? The chimney is leaning and separating from the house. You observe separation between the chimney and the house that increases in width with height (i.e., there is no separation at the bottom and there is upwards of 2 inches of separation at the roofline) (Figure 1). The heavy self-weight of the chimney comprised of masonry components is prone to rotating away from the house due to settlement of the underlying soils. Further, due to the height of the chimney, a relatively small rotation of the chimney foundation could result in a significant separation toward the top of the chimney. Most commonly and rightfully so, the cause of the chimney displacement is settlement of the underlying soils supporting the chimney foundation.

    7/20/2017 · Construction
    Commonly called "flat roofs," most commercial buildings are actually clad with roof systems that provide about 1/8 to ¼ inch per foot of positive drainage. These roof systems are constructed differently than most steep-slope roof coverings and are typically watertight rather than water-shedding assemblies.

    6/27/2017 · Finance
    A recent Donan forensic fire investigation found that a poor connection in a floor-mounted duplex receptacle was the cause of fire. The receptacle was located in the area of origin and all other identifiable causes were eliminated during the investigation. While conducting the research for this particular case, Donan investigators evaluated many scholarly sources in order to clearly educate the client on how a loose connection in a receptacle could lead to a structure fire which, in this case, nearly consumed the bedroom. The best explanation was found in the chemistry associated with the formation of an oxide that contributes to the condition.

    Over the past several years, there has been a clear trend of phasing out "dry-charge" air conditioners and heat pumps. What happened, why are some contractors still selling them, and what are the current common repair/replace options? Read this insightful article for everything you need to know on the topic.

    12/2/2016 · Engineering
    The term plumbing is derived from the Latin word "plumbum," the name of the metal lead that was the preferred material used by the Romans to construct their empire's water supply systems. This bit of history is even relevant today as the continued use of this potentially toxic metal has made headlines because of recently exposed problems in the Flint, Mich., water supply.

    7/29/2016 · Forensics
    Most forensic investigation projects include a scope to determine the cause of some damage or condition. Project scopes often request determining the cause and origin of the damage. Since insurance policies contain descriptions of covered and non-covered situations, clearly specifying causes and origins is crucial for clients' coverage decisions. This article discusses the differences between and significance of these two important terms.

    4/18/2016 · Construction
    Brick masonry chimneys have been prevalent for centuries, but it wasnt until recent decades that brick-clad, wood-framed chimneys became common in residential construction. This trend resulted from the increasing popularity of metal insert fireplaces. While they may appear similar from the exterior, the structure and weather-resistant envelope of wood-framed chimneys are very different than masonry-built chimneys. Prior to studying damage, it is important to understand critical elements in the structural support and weather-resistant envelope of wood-framed chimneys and the types of damage that can result from improper construction.[1]

    Fires can be caused by devices that fail due to a manufacturer's defect. Quality assurance procedures have gone a long way to eliminate out-of-box failures but manufacturers sometimes bypass quality checks on consumer products for competitive reasons. Even the most ethical companies are susceptible to human error that can cause an almost imperceptible change in an otherwise flawless manufacturing procedure.

    As the days get shorter and temperatures turn milder, most HVAC systems are taking a well-earned vacation. For a short while, a cool breeze through open windows will be enough to keep us comfortable in our homes. But soon, homeowners will switch their thermostats from cooling mode to heating mode, and some of them will unfortunately discover their HVAC system does not heat. It's time to pull out those extra blankets and make the call to a service professional sooner than expected.

    12/21/2015 · Construction
    Wood bowstring trusses were used extensively in commercial buildings from the 1920s to the 1960s. Wood bowstring roof trusses provided long clear spans necessary in warehouse and industrial buildings. Many roofs supported by bowstring trusses are still in service today. Compared with other structural timber-truss types, bowstring trusses have exhibited more frequent structural problems. The structural deficiencies encountered are attributable to deficiencies in the original design of the trusses combined with damage due to exposure and age.

    9/28/2015 · Engineering
    The National Fire Protection Association (NFPA) has released a 2015 edition of NFPA 70E: Standard for Electrical Safety in the Workplace. It covers and assists in complying with the Occupational Safety and Health Association's requirements, including changes to requirements since the last edition. For personal safety in forensic studies it is important to stay informed of these updates. NFPA 70E covers arc flash risk assessment, establishment of arc flash boundaries, requirements of Personal Protective Equipment (PPE), use of PPE within the arc flash boundary, and equipment labeling requirements regarding arc flash hazards. The following examples illustrate the importance of staying abreast of the latest standards.

    7/16/2015 · Construction
    History shows us that building codes have been around for a long time - in fact, the earliest known was around in 2000BC[1]. Penalties were also much harsher for construction defects. If a builder constructed a house that collapsed and killed the owner, the builder was not fined, but was put to death. The United States has been a country with diverse codes - as many as 5,000 at one time. More recently, however, various states and municipalities have adopted "model" codes such as the International Building Code or International Residential Code. These provide a "base" and may be used as written or an Authority Having Jurisdiction (AHJ) may amend certain parts of the model code, making it more stringent and/or specific for a certain area.

    5/14/2015 · Forensics
    Whether it is helping us formulate our opinion or confirming an initial diagnosis, technology plays a valuable role in forensic engineering work. Following are a few examples of existing technology available to Donan's project managers. Though not standard issue, these tools are utilized when necessary to accurately determine or confirm a cause of loss.

    There are many types, manufacturers, and sizes of commercial HVAC systems which can make it difficult to create general guidelines for repair procedures and estimates for hail-damaged units. This guide uses the most common "light commercial" rooftop units (RTUs), which are 5-tons, 7.5-tons, and 10-tons in capacity, for estimating time to repair or replace.

    Imagine for a moment that you are sitting in your home, listening to the rain while reading your favorite novel. Then suddenly you hear a roar of thunder and your home becomes dark. What just happened? You may have just experienced a power surge. Although lightning is not the most common cause of this phenomenon, it is excellent for illustrating what a power surge is and how it can affect your home. A power surge is a term used to describe a condition where the voltage and or current increases beyond its normal levels. Power surges, when due to the elevation of the voltage being supplied by the electrical utility company, have the potential to change data streams, interrupt electrical control circuits, burn out components, cause arcs, create shorts between conductors, overload systems, and cause system failures. The most common causes of power surges are indicated as follows:

    1/7/2015 · Construction
    Concrete is a desirable construction material due to its inherent strength and durability, which make it well-suited for many applications in residential and commercial construction, especially foundations, floor slabs, driveways, sidewalks, and roads, among other things. In these applications, concrete that is properly designed, mixed, placed, and maintained will perform exceptionally well for many years. However, poor design or mix, improper placement, finishing techniques, or inadequate maintenance may result in concrete that does not perform as intended. Aside from cracking, which is probably the most common form of distress to concrete, since virtually all concrete will crack as it cures, surface distress due to scaling, spalling, and popouts are the most common forms of damage.

    12/2/2014 · Construction
    The relationship between wind, hailstone velocity, and impact energy is based on an understanding of fundamental physics. Over a half century of laboratory research and field studies have determined that the severity of hail damage to a roofing material is contingent on the kinetic energy at the point of impact and the roofing material's resistance to that impact energy. These studies have found that a hailstone must be of a certain mass (i.e., size), and it must be traveling at a certain speed (velocity) to result in functional damage to the roofing material. The kinetic energy is a composition of mass and velocity, defined by the following equation:

    10/17/2014 · Construction
    Chances are, it's happened to you. An unexpected period of cold weather occurs and temperatures drop well below freezing for an extended period of time. One morning you attempt to turn the water on in the kitchen sink and...nothing. Hot water? Nope. Cold water? Nope. What happened? Did you forget to pay the water bill...again? Chances are, your pipes are frozen. "How can that happen? They are inside the house!", you may say; however, just because your water lines are inside the building envelope, does not mean they are adequately protected from freezing.

    9/4/2014 · Construction
    If hail impacts a roof covering and the effects of this impact result in some loss in the material's overall integrity or functionality, this material is classified as "hail damaged." More specifically for cedar shakes and shingles, valid hail damage is typically a new fracture of the cedar corresponding to a clean spot or scuff mark from the hailstone impact.

    7/25/2014 · Construction
    Although sags along roof ridgelines can be discovered at any time, in northern climates they are often attributed to the effects of a past snow load. To make an educated analysis of the actual cause of this phenomenon, one must have a basic understanding of the structure and the loads to which it has been subjected.

    Heating, ventilating, and air conditioning (HVAC) systems consist of many components that work in unison to create the desired comfort level for our homes and offices. A well maintained system is designed to last around 15 years, but the life can be dramatically reduced when proper installation procedures and routine maintenance are not performed.

    5/28/2014 · Construction
    Ice dams and their resultant leaks are often a chronic and expensive problem in those regions where snow-covered roofs are a common occurrence. To understand their detection, cause, and prevention requires some understanding of the dynamics of a structure's construction, insulation, and ventilation.

    A space heater is a device designed to warm a small area. These devices are typically portable, but the category does include gas- and wood-fueled models that are permanently installed; however, these are not the focus of this article.

    3/12/2014 · Failure Analysis
    Washing machine failures can create significant damage, exposing insurers and their clients to property damage. These failures often involve a high volume of water and can occur without warning. Through the examination of several hundred washing machines, the DONAN Component Testing Laboratory has identified a statistically significant failure trend in General Electric (GE) washing machines. The amount of water supplied to the tub of the washing machine is controlled by a water valve (solenoid-controlled valve) and pneumatic controls. The washing machine's load selector is a pneumatic pressure switch, which activates and deactivates the water valve.

    2/10/2014 · Construction
    Shallow foundations are the most commonly designed and constructed structural foundation system. As opposed to deep foundations where structural loads are transferred to subsurface layers or multiple depth ranges, shallow foundations transfer loads to the earth (soil) relatively near to the ground surface. Some examples of shallow foundations include building components often seen in residential construction such as spread footings, continuous foundation walls and footings, slab-on-grade foundations, and mat-slab foundations.

    1/9/2014 · Construction
    After a tornado event, devastation and destruction are found along the tornado path. Due to the wood-framed construction predominant in Texas and Oklahoma, extensive damage to a house can occur. But how do you know whether visible cracks in the Sheetrock or brick finishes are just cosmetic damage or the signs of structural failure?

    12/10/2013 · Fires & Explosions
    Automatic fire suppression systems are by far the most effective and safest means of preventing extensive fire damage and saving lives. For this discussion, we will touch on automatic sprinkler systems (building systems) and kitchen hood suppression systems. These systems range from very simple to extremely complex.

    10/23/2013 · Construction
    Summertime rolls around and people start seeing condensation on ductwork. Their first thought is that something is wrong with their air conditioner. Actually, sweating ducts have several causes. Very few are attributable to defective air conditioners.

    10/4/2013 · Engineering
    In urban and suburban areas, stormwater systems are found everywhere. From surface waterways, such as rivers, streams, and ditches, to subsurface drainage systems, such as storm sewers and culverts, stormwater systems are as ubiquitous as concrete, which is one of the reasons they are so important (Figure 1). Impervious surfaces like concrete, pavement, and roofs prevent stormwater from naturally absorbing into the ground, and the resulting runoff can cause flooding, erosion, and subsequent structural damage.

    For many years, the fire investigation industry has seen numerous fires involving livestock buildings. These fires are often high profile, especially when masses of animals are lost or injured. Many times these losses are in older structures with neglected electrical and/or heating systems. Given the interior environment, corrosion and degradation to electrical and heating components are common.

    8/16/2013 · Construction
    Cupping, buckling, and crowning are three common problems encountered in wood flooring (flooring). These problems are caused by a combination of the normal material characteristics of the flooring and improper installation of the flooring.

    7/31/2013 · Waterproofing
    While shovels, snowblowers, plows, and deicing agents are used to clear snow and ice from driveways and sidewalks during the winter, removing frozen precipitation from the roof of a house is a bit more challenging. As snow and ice piles up on the roof and subsequently thaws out, the melt-water can sometimes result in damage to the interior of the structure.

    7/15/2013 · Construction
    "Hail has damaged my concrete driveway!" How many times have you heard this claim? A homeowner whose house has experienced a recent severe hailstorm starts to notice things they never noticed before around their house.

    A Donan fire investigator uses many techniques in order to determine the origin and cause of a fire. Chief among these are the investigator's observations of the scene and the conditions surrounding the scene.

    In this age of high energy costs, the price of heating the house will increase. People will be searching for alternate sources to heat their houses.

    4/24/2013 · Construction
    In our October 2010 newsletter, Bob Whelan, P.E., discussed how to approach a roof hail study by using the scientific method. In summary, one should perform a collateral study of the property, or neighboring properties, to gather information about the particular hailstorm in question.

    3/21/2013 · Construction
    Whether to build a residence on a concrete slab or conventional crawlspace foundation is a common decision homeowners must make.

    2/13/2013 · Construction
    By: DONAN
    Is construction vibration just an annoyance, or does it have the potential to cause aesthetic and structural damage to nearby structures?

    1/7/2013 · Construction
    Attic ventilation problems can cause elevated relative humidity in an unheated, residential attic. Elevated relative humidity in the attic can promote mold growth and increase the moisture content in the wood framing to a level that promotes fungal growth and rotting.

    11/30/2012 · Failure Analysis
    Every year, Donan Engineering is asked to look at dozens of basement walls that have failed. A wall is determined to have "failed" when the structural integrity is compromised - such as with the development of a horizontal or vertical crack.

    Check for SynapsUs
    Eugene R. Camerota, PE
    President
    PO. Box 15486
    Syracuse NY 13215
    USA
    phone: 315-676-5187
    fax: 315-676-5187
    Eugene R. Camerota is a Professional Consulting Engineer. His consulting experience includes the analytical and experimental studies of Engineering problems dealing with Accident Reconstruction and Product Liability. His work includes the following specialties:
  • Automotive / Motorcycle Accident Reconstruction
  • Crash Data Retrieval
  • Seat Belt Restraint Analysis
  • Automotive Component Design Evaluation
  • Construction Equipment
  • Industrial / Portable Machinery
  • Consumer Product Evaluation
  • OSHA
  • Slip and Fall
  • Check for SynapsUs
    Daniel W. Vomhof, PhD
    Certified Accident Reconstruction Specialist
    8387 University Avenue
    La Mesa CA 91942
    USA
    phone: (619) 464-3477 / Cell: (619) 784-8238
    fax: 619-464-2206
    daniel_vomhof_logo.jpg
    Dr. Daniel W. Vomhof, PhD is a Accident Reconstruction Specialist with specialized knowledge in Human Factors and BioMechanics. He provides Scientific Evidence Evaluation and Event Reconstruction in matters involving personal injury, property damage, or product failure or malfunction.

    Dr. Vomhof has been a full time forensic reconstruction consultant since 1973. He has a PhD in Biochemistry / Physiology and MS in Analytical Chemistry and Occupational Safety & Health.

    Areas of Specialization:
    • Event Reconstruction
    • Vehicle Accident Reconstruction
    • Biomechanics and Biodynamics
    • Human Factors
    • Questioned Documents
    Litigation Support - Dr. Vomhof has reconstructed over 3,000 accidents and appeared in over 500 trials as a testifying expert witness. Dr. Vomhof is available to attorneys representing both Plaintiff and Defense.

    Services Include:
    • Evaluation of traffic signal timing related to vehicle, pedestrian, and motorcycle accidents
    • Reconstruction of vehicle, pedestrian, and motorcycle accidents
    • Evaluation of Pedestrian, Facility, Walking Surface interactions
    • Measurement and evaluation of lighting as it affects perception of hazards
    • Measurement and evaluation of sound levels
    • Documentation of vehicle evidence and scene conditions through photography and measurements
    Check for SynapsUs
    Dr. William D. Guentzler
    61115 Fire Barrel Drive
    La Quinta CA 92253-7945
    USA
    phone: 619-823-9081
    William Guentzler, Ph.D. has over 30 years as a Forensic Examiner and 36 years as a University Professor. Dr. Guentzler specializes in the area of FAILURE ANALYSIS for autos, trucks, ATCs, ATVs, motorcycles, motor homes, marine and golf carts.

    Areas of Expertise:
  • BRAKES
  • TIRES
  • IGNITION
  • FUEL SYSTEMS
  • COOLING
  • ALTERNATIVE FUELS / BI and DUAL FUEL SYSTEMS
  • ELECTRICAL
  • SEAT BELTS
  • BATTERY EXPLOSIONS
  • HYBRID ELECTRIC VEHICLES
  • VEHICLE FIRE CAUSE AND ORIGIN
  • Dr. Guentzler has served as an Expert Witness for both Plaintiff and Defense in over 550 Cases. References are available upon request.
    Check for SynapsUs
    Dr. Russell Darnell
    President
    PO Box 5586
    El Dorado Hills CA 95762
    USA
    phone: 916-825-5592
    fax: 530-676-1513
    Dr. Russell Darnell is an expert in Accident Reconstruction: Motorcycles, ATV's, Cars, Trucks, Buses, Heavy Equipment, Trailers, Boats, Ships, Yachts, Racetrack Design and Maintenance.

    Areas of Expertise:
  • Motorcycle Accidents
  • ATV Accidents
  • Automobile Accidents
  • Truck Accidents
  • Towing Accidents
  • RV Accidents
  • Tire-Related Accidents
  • Marine Accidents
  • Repair Fraud
  • Machinery
  • Fires- Source and Cause
  • Services Provided:
  • Review and Advise on Case Merits
  • Defense and Plaintiff Case Accepted
  • Accident Reconstruction
  • Trial Preparation
  • Video and Photo Analysis
  • Exhibit Preparation
  • Trial Testimony
  • Deposition Testimony
  • Mediation Testimony
  • Research and Development Training
  • Engineering Management
  • Russell E. Darnell, PhD
    The purpose of this research was to determine whether or not there is a measurable relationship between the use of expert witnesses in civil litigation and the profitability of American law firms. The subjects in the present study were 1,065 American law firms which responded to a confidential survey. . .
    Check for SynapsUs
    Roy Theophilus Bent, Jr.
    104 West Baker Rd.
    Baytown TX 77521
    USA
    phone: 877-845-2368 or 281-424-6466
    Roy-Theophilus-Bent-Auto-Appraisal-Expert-photo.jpg
    Houston Auto Appraisers Auto 
<br/><br/>PhotoRoy Theophilus Bent, Jr., CEO of Houston Auto Appraisers, is a well known and respected expert and consultant in the automotive industry. He holds numerous licenses and credentials as an ASE Certified Mechanic, I-Car Collision Specialist, Licensed Auto Appraiser, Insurance Adjuster, Umpire, Mediator, Arbitrator, Classic Car Judge, and Vintage Car Historian.

    An IACP Certified Auto Appraiser and Field Inspector, Mr. Bent offers appraisal services to insurance companies, attorneys, banks, credit unions, lenders, agricultural credit corporations, accountants, government agencies, auctioneers, farmers, ranchers, transportation companies, and individual consumers. He provides the following selected consulting services:
    • Diminished Value Appraisals
    • Total Loss / Stolen Vehicle Appraisals
    • Certified Real Estate Appraisers and Texas Homeowners Insurance Claims Assistance
    • Industrial, Construction & Heavy Equipment Appraisals
    • Tractor Trailer and Equipment Appraisals
    • Recreational Vehicles
    • Motor Homes
    • Travel Trailer Appraisals
    Mr. Bent is the seated President of the Bureau of Certified Auto Appraisers (BOCAA), a National Professional Appraisal Credentialing Organization that has trained, tested, and certified over 2,400 students under his leadership in the practices of IACP Certified Auto Appraisals and Litigation assistance.

    In addition to his appraisal services, Mr. Bent offers Appraisal Training Certification courses designed to properly train and educate the appraiser with the minimum requirements set forth by the Bureau of Certified Auto Appraisers. BOCAA courses include:
    • IACP Certification Exam - To provide suitable training and education to the auto appraisal professional. IACPSM Certified Appraisers follow strict adherence the Bureaus’ Code of Ethics and USPAP guidelines
    • Texas Adjusters Pre-Licensing Course - 40-hour Texas Adjusters Pre-licensing course approved by the Texas Department of Insurance as an alternative method of obtaining your Texas Adjusters Property & Casualty license
    View Roy T. Bent's Expert Witness Profile.
    Check for SynapsUs
    Gary E. Kilpatrick, PE, DFE
    President and Chief Engineering Officer
    3397 Cherrybrook Drive
    Jamestown NC 27282
    USA
    phone: 336-841-6354 (Office) 336-803-1639 (Cell)
    fax: 336-841-6375
    gary_kilpatrick_photo.jpg
    Who is Kilpatrick Forensics?



    Kilpatrick Forensics is a forensic engineering firm that provides forensic engineering investigation and analyses services for our legal and insurance clients. Mr. Kilpatrick travels throughout the United States in order to investigate motor vehicle crashes and product defects and failure claims resulting in personal injury or death. Mr. Kilpatrick is a board certified vehicle crash reconstruction engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensic Engineer (DFE). He is also a part-time instructor for Northwestern University through their Center For Public Safety and is a firm believer in continuing education.



    The Mission of Kilpatrick Forensics:



    Mr. Kilpatrick’s mission is to provide to you forensic engineering services that are dedicated to the application of the art, science and methodology of engineering and the scientific method in order to answer questions of fact in the jurisprudence system to assist the trier of fact concerning motor vehicle accidents and motor vehicle product defect and failure claims. Mr. Kilpatrick utilizes his engineering knowledge, skill, experience, training and education to give you an objective professional opinion that is thorough and comprehensive, understandable and timely. He has submitted written expert reports in state and federal court and has given sworn expert testimony under oath during both deposition and trial.



    What services does Kilpatrick Forensics provide?



    • At-Scene Investigation and Evidence Mapping

    • Motor Vehicle Crash Reconstruction

    • Vehicle Crash Testing

    • Vehicle Skid Testing

    • Image, Store and Analyze a Vehicle’s Crash Data Report (CDR) stored in the EPROM

    circuitry of a Vehicle’s Airbag Control Module (ACM)

    • Photogrammetry Studies of Police Photographs

    • Airbag and Seat Belt Inspections

    • School Bus Crash Reconstruction

    • Tractor Trailer/Heavy Trucks Crash Reconstruction

    • Motorcycle Crash Reconstruction

    • ATV and ROHV Crash Reconstruction

    • Computer Based Dynamic Motor Vehicle Crash Simulations Videos

    • Standards of Care for Motor Vehicles

    • SAE Standards

    • National Highway Traffic and Safety Administration (NHTSA) Regulations

    • Federal Motor Vehicle Safety Regulations

    • Product Defect and Failure Analyses

    • Machine Design and Analyses

    • Computer Aided Design (CAD)



    Who are the clients of Kilpatrick Forensics?



    Mr. Kilpatrick works with law firms, public defenders and insurance companies on civil plaintiff, civil defendant, criminal and insurance claimant cases.



    How can you contact Kilpatrick Forensics?



    Mr. Kilpatrick’s corporate office is located in Jamestown North Carolina. Visit our website at www.kilpatrickforensics.com. Please feel free to contact him any time at office at 336-841-6354 or cell phone at 336-803-1639.
    During 1990, the Specialty Vehicle Institute of America (SVIA) with the assistance of the American National Standards Institute (ANSI) published the first standard for ATVs referred to as ANSI/SVIA-1-1990. During 2001, ANSI/SVIA revised this standard referred to as standard ANSI/SVIA 1-2001. The standard was revised again during 2007 and again in 2010 and is referred to as standard ANSI/SVIA 1-2010.

    A Traffic Accident Reconstruction is a process by which an engineer determines from all available information and evidence how and why a traffic accident occurred including but not limited to pre-impact and post impact vehicular velocity vectors, pre-impact and post impact vehicular direction vectors, vehicular change in velocity (Delta-V), momentum vectors, vehicles' point of impact on the roadway, vehicular visibility by a driver, vehicular crash data retrieval reports if assessable, accident factors and causes.

    7/8/2011 · Engineering
    Quality control starts at the point of product conception and is carried all the way through to the final design and manufacture of a product.

    Some motor vehicle accidents take place during the night time hours when natural sun light is not present.

    When we drive our vehicles down the road, we are driving them at a certain velocity and direction. All vehicles have weight and mass to the order of a few hundred pounds for a motorcycle, a few thousand pounds for a large SUV or luxury car or several tons for a tractor-trailer truck. When our vehicles move at speed down the road, they create energy by virtue of their mass and forward velocity

    Check for SynapsUs
    P.E.
    1111 Town & Country Rd,Suite 34
    Orange CA 92868
    USA
    phone: 714-973-8383 Cell: 714-904-2821
    fax: 714-973-8821
    Traffic Engineer Expert Witness / Motor Vehicle Accidents

    EDUCATION:
  • Undergraduate - UCLA (1967)
  • Graduate - Yale University (1968)

    SPECIALTY:
  • Traffic accidents - maintenance, design, geometrics, controls, signage, sight distance, parking, motorcycle, bicycle, pedestrians, governmental agency procedures
  • Over 300 cases since 1979
  • largest verdict $12.3 million against caltrans pedestrian case
  • Largest settlement $2,000,000 in solo vehicle accident case against Caltrans

    FORMER EMPLOYMENT:
  • Los Angeles County Road Department
  • Riverside County Road Department
  • City of Irvine
  • Federal Highway Administration
  • Check for SynapsUs
    Paul Kayfetz
    P.O. Box 310
    Bolinas CA 94924
    USA
    phone: 415-868-0480
    fax: 415-868-9336
    paul_kayfetz_photo.jpg
    For forty years, PAUL KAYFETZ, INC. through Mr. Kayfetz' expert testimony, has routinely admitted the following into evidence:
  • Driverseye Visibility Studies
  • Night-Time Photography
  • Computer and Video Simulations
  • Accident Reconstruction Photos
  • Photogrammetry Photo Measuring

    Our computer engineers, video engineers and engineering photography experts:
  • Apply Accepted Engineering Measurements Procedures
  • Have Published Numerous Peer-Reviewed Engineering Papers
  • Use HD Video Systems that Produce Movie Theater Quality
  • Apply Cutting Edge Computer Techniques for Lifelike Photorealistic Images (not Computer Cartoons)
  • Coordinate with the Best Accident Reconstruction and Human Factors Experts for Technical Accuracy

    We frequently help plan complete technical testing, visibility study, computer simulation and demonstrative evidence strategy - coordinating a group of technical witnesses who are independently retained by counsel. This is requested by many clients because of Mr. Kayfetz' track record, his previous career as an attorney, his extensive contact with top experts from his forty years experience as an engineering photography consultant working with the best forensic witnesses on many of the major cases during those decades, and upon his membership and participation in major engineering societies.

    Each year we help attorneys win and save hundreds of millions of dollars in verdicts and settlements.

    This results primarily from our experience and expertise. It also stems from our ability to discover measurements from existing photos. We are ahead of everyone in our field because we invest in HD cameras costing 250,000 each, six figure computer systems, custom engineering computer programs and staff engineers - not artists.

    A major part of our work is evaluating and keeping out of evidence opponents' forensic photography, computer simulations, or computer animations which do not comply with the rules of evidence. This has swung multi-million dollar results several times in recent years.
  • 9/27/2016 · Human Factors
    The explanation then given is a basic, but little understood, fundamental of the presentation of a visibility study in court. A visibility study depicts what is available to be seen by a person with normal, unimpaired vision under defined conditions similar enough to those at issue to provide relevant information about levels of visibility, lines-of-sight, timing of visibility, and to demonstrate expert witness(es)' opinions.

    8/27/2009 · Human Factors
    Jurors jumped as the wild boar in the motorcycle headlights suddenly filled the large screen in front of them.A week later they awarded the motorcyclist several million dollars against Caltrans for not mitigating a chronic wild pig problem on Highway One in Monterey County. The jury found that the motorcyclist had a 0.10 blood alcohol level and was negligent, but that our HD-video visibility study showed that even an unimpaired driver could not have seen the pig in time to avoid it.

    9/17/2007 · Computers
    The objective of this article is to report on the integration of improved video and related computer technology into existing, long-accepted visibility study preparation and presentation methodologies. The result has been an incremental extension of the types of visual environments which can be reproduced with substantial similarity for admission as visibility evidentiary exhibits in court