David Alley is a Consulting and Forensic Engineer with over three decades of Design Engineering Experience, Field engineering experience and financial analysis experience for power Generation Projects in Cogeneration, Nuclear, Hydropower, Diesel Engine, Combustion Turbine and Gas Turbine Powered Power Generation Facilities. Mr. Alley is a National Electrical Code NFPA-70 expert and an Hazardous area delineation expert.

BSEE-Clemson, MBA-Darden

Bison is a multi-disciplined engineering firm specializing in failure analysis, forensic engineering and fire sciences with a team of P.E.'s who have performed thousands of forensic assignments including in excess of 1,000 fuel gas investigations.

Legal professionals turn to Bison to scientifically conduct investigations to determine the cause of destructive events. Forensic Engineers provide expert testimony and consultation. Investigations include explosions, fires, carbon monoxide incidents, electrical fires and failures, structural failures, mechanical failures, accident reconstruction, specialized testing, and courtroom presentations:

Fuel Gas Incidents: Fire and Explosion Causation; Propane Explosions, Natural Gas Explosion, Gas Delivery Systems; Carbon Monoxide Testing and Evaluation, Production and Migration Investigations; Plant & Pipeline, Piping Evaluation; Operational Analysis; Appliance Evaluation; Code Compliance; Soil Gas Migration; Vapor Dispersion

Fire Investigation and Explosion Analysis: Cause and Origin, Scene Documentation; Collection of Evidence; Certified Fire Investigator

Electrical Engineering: Electrically Related Fires, Electrical Service and Wiring Failures, Production Facility Service and Controls for Chemical, Petroleum, and Distribution Facilities, Electrical Contacts, Electrocutions; Lightning Strikes

Mechanical Engineering: Equipment Design and Operation; High-Pressure Oilfield Equipment; Pump Design and Operation; HVAC Systems; High and Low-Pressure Seals; Plastic Part Design and Manufacture, Industrial Equipment

Accident Reconstruction: Accident Sequence Reconstruction; Speed, Time and Distance Calculations; Crush Damage; Braking; Steering and Mechanical Analysis, including Tires; Electrical System / Electronic Failures; Mechanical and Fuel Systems; Airbag and Seatbelt Fatalities/Injuries; Staged Vehicle Impact

Failure Analysis: Industrial Equipment, Vehicle Impacts, Airbags and Seat Belts; Elevator Failures; Helmet and other Protective Equipment Failures; Infant Crib Design Inadequacies; Carbon Monoxide Investigations, Crane Failures, etc.

Metallurgical Engineering: Metal Fatigue of Gas Compressor Components; Electrical Contact Evaluations; Cracking of Structural Plastics; Chemical Analysis; Corrosion & Stress Evaluation and Analysis; SEM Analysis; Electron/Optical Microscopy; X-ray Examination

Bison's clients argue their cases with confidence, secure in the knowledge that their claims are based on unbiased, scientific data.

Engel Metallurgical Ltd. is an independent Materials Engineering consulting and testing company. Our team of engineers, technicians, and administrative staff, is dedicated to providing timely and cost-effective service. We aim to continuously improve the scope and quality of services using the latest technology to meet or exceed our customer's expectations. For your convenience, Engel Metallurgical Ltd. will provide support at our lab, your site, or your vendor's site. ISO 17025 accredited.

Areas of Expertise:

Turbine and Power Generation

Failure Analysis

Legal Investigation & Expert Witness

Materials Consultants

Research and Development

Component Failure Analysis

Lester P. Engel, JR., P.E. Metallurgical Engineer with more than 38 years of experience in materials application, failure analysis, R & D program management, materials and process specifications, engineering standards and procedures, laboratory design and operation, data analysis and personnel and budget management.

Services Offered:

Provides metallurgical and materials joining consulting to a wide variety of clients in the manufacturing, legal, and insurance industries

Performs failure analyses of products manufactured from various materials, including metals, cements, and plastics

Renders expert opinions and gives depositions and testimony for litigation support

Assists manufacturing clients with materials and process selection and problem solving, and prepare material and process specifications

Develops and reviews product design, materials, and process specifications

Oversight and development of on-site metallurgical testing laboratory that provides: scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS); metallographic preparation and examination; and mechanical property testing

KnightHawk Engineering, Inc. is a technology based Specialty Engineering Company that performs consulting, field services and testing. They do this with a broad spectrum of experience-based personnel utilizing a multi-discipline integrated systems approach. Using the same approach KnightHawk develops and manufactures performance enhancement products. KnightHawk Engineering is frequently called on to solve the most difficult and challenging problems in industry which need to be solved within aggressive time constraints, without sacrificing safety, quality, or performance.

KnightHawk Engineering have made their mark in the analysis of static equipment including selective linear exchangers, quench coolers, furnace tubes, pelletizing dies, and blow-down systems into closed headers. Rotating equipment analysis includes machine and structural dynamics, evaluation of acoustic pulsation, and rotordynamic modeling. They have also established a good reputation in specialty machinery design and third party design audits.

Cliff Knight is President of KnightHawk Engineering and a Professional Engineer with 36 years of experience. Besides his corporate responsibilities as President, Mr. Knight is also Chief Engineer. Mr. Knight specializes in design, failure analysis and troublshooting in static rotating equipment. He has 21 years of experience in utilizing computer applications, which include Finite Element Method, Numerical Modeling, Heat Transfer, Pipe Stress Analysis and Computer Fluid Dynamics.

While with KnightHawk, Mr. Knight has developed proprietary tools and methods for performing analysis on Pelletizing Dies, Presure Vessels, Heat Exchangers and Centrifugal Compressors. He holds four patents related to this work. Before coming to KnightHawk, Mr. Knight spent ten years at Dow Chemical, U.S.A., where he acheived the position of Sr. Mechanical Engineering Specialist and Group Leader.

Services Include:

FEA – Linear / Nonlinear – Elastic / Plastic CFD – Transient and Steady State Fitness for Service Pipe Stress Machine Design Rotating Equipment Repair Pressure Vessel / Heat Exchanger Design Thermosyphon Analysis – Complex Systems Process Simulation on Static and Rotating Equipment Rotordynamics Heat Transfer

Thermodynamics Water Hammer / Steam Hammer Structural Dynamics Earthquake Analysis Off Shore Wave / Wind Analysis Code Compliance Risk Assessment Catastrophe Investigation Vehicle Dynamics Controls Analysis Third Party Design Audit

Specialty Areas Include:

ASME Code Compliance Boilers Compressors Critical Piping Systems Elastic / Plastic FEA Fit For Service Analysis Heat Transfer Driven FEA Engines Flow Induced Vibration Furnaces Reciprocating Pumps and Compressors

Gas and Steam Turbines High Pressure Reactors Pelletizing Dies Selective Linear Exchangers Specialty Equipment Design Steady State / Transient CFD Analysis of Static and Rotating Equipment Structural Analysis Transfer Line Exchangers Vessel Alterations and Repairs Process Performance Analysis of Static and Rotating Equipment

Mr. D.E. Hansen, M.E. founded Piping Analysis Incorporated (PAI) in 1972 as a full service Engineering Company specializing in Piping, Mechanical, Machinery, and Civil / Structural Design Problems. Originally serving the local Gulf Coast region (Louisiana, Texas, Mississippi), PAI has seen tremendous growth in its business and now solves complex engineering problems all over the world. The results of their work are presently operating throughout the Americas, Europe, the Middle East, Africa, and Asia.

PAI understands that efficiency loss and shut-downs cut deeply into the bottom line. PAI will work around the clock to provide the correct answers as quickly as possible and you can expect the most workable, cost-effective solution.

Areas of Expertise:

Piping Stress & Flexibility Finite Element Analysis CFD & Fluid Flow Heat Transfer Vibration Failure Analysis

Plant Design Civil & Structural Construction Drawings Project Scheduling Design Review Construction Follow-Up

POWERPLANT Consultants, Inc., (PPC) is a technical services company providing highly specialized support services for Industrial Power Generation Systems, Cogeneration and Combined Cycle Power Plants. PPC specializes in Design, Performance, Forensics, Construction, Design Defects, Cost Analysis for Lost Operations, Maintenance, and Repair. PPC has extensive international experience and is OSHA Lockout / Tagout Certified.

Areas of Expertise

Power Generation

Marine Propulsion - Conventional / Alternative Fueled Systems

Microturbines

Boilers

Industrial Gas Turbines

Diesel Engines

Cogeneration

Geothermal

Landfill

Digester Gas

Wind and Solar Powered Generation Systems<

Mechanical Engineer - Turbomachinery Expert. Gas turbine engines, steam turbines, jet engines, compressors, pumps, expanders, generators, cogeneration, combustion equipment, diesel engines, and reciprocating compressors. Failure analysis, stress analysis, mechanical design, design analysis, troubleshooting, performance analysis, durability assessment. Access to metallurgical laboratory. Experienced Expert witness.

Please see our Service List at www.sbkushnick.com/servicelist.pdf for a concise description.

Dr. Meherwan P. Boyce, Ph.D., P.E., CEng, Fellow ASME (US), IDGTE (UK), IMechE (UK); has 44 years of experience in the field of TurboMachinery in both industry and academia. His industrial experience covers 20 years as Chairman and CEO of Boyce Engineering International, and five years as a designer of Compressors and Turbines for Gas Turbines for Various Gas Turbine Manufacturers. He is committed to providing leading edge technologies, in areas of infrastructure projects and specialized Engineering skills, in energy, Turbomachinery, corrosion, and environment related areas.

Areas of Expertise:

Aerodynamics

Automotive Engineering

Bio-Engineering

Cogeneration

Environmental Engineering

Fluid Mechanics

TurboMachinery

Heavy Fuels Combustion

Performance Evaluation of Combined Cycle Power Plants

Forensic Engineering and Expert Witness Testimony:

Combustion Turbines

Steam Turbines

Compressors

Dr. Walter Vinoski specializes in the field of Energy & Power Plant Management. He provides Plant Management & Safety Audits, Operational Failure Analysis, O&M Contract dispute services, EPC Contract dispute services, and expert witness services. He provides support to utilities, IPPs and cogeneration in getting insurance companies to make payments on claim.

Services Provided:

Fund Manager Support (Wall Street & Toronto) Employee Safety & Accident Cases Lender Support (Senior & Subordinate) Power Generation Corporate Board of Director (Operation & Compliance) Project Proforma Construction & Analysis Power Plant Acquisition

Project Development Executive Management Consultation Operational Cashflow Analysis Merchant Plant Business Training Power Plant Asset Management Operations & Maintenance Polices & Procedures Project Documentation, Agreements, T&Cs

---

---