Dr. Joseph D. Jolson has over 28 years of industrial experience providing Product Development, Product Support, Litigation, Subrogation, and Intellectual Property Services. He has championed the development of two-dozen commercially successful products. Dr. Jolson's experience includes:

The development, testing, use, and analysis of failed aqueous and lithium batteries

The development, placement, testing, use and analysis of failed carbon monoxide, chlorine, combustible gas, ethylene oxide, hydrogen, hydrogen sulfide, oxygen, nitric oxide, nitrogen dioxide, and volatile organic hydrocarbon gas detectors

The development, testing, use and analysis of failed air purifying respirators including self-contained self-rescuers

Areas of Expertise:

Batteries

Chemical Analysis

Gas Detection

Failure Analysis

Industrial Hygiene & Safety

Laboratory Safety

Material Safety Data Sheets

Mine Safety

Product Testing

Respiratory Protection

Firm Profile: Global Technology Experts is a leading engineering and scientific consulting firm providing solutions to complex technical problems. We have been in the engineering and scientific consulting business since 1996, offering our clients an array of experts that spans virtually all engineering and scientific disciplines. We provide a wide array of services, ranging from accident reconstruction and failure analysis, specifically product liability, personal injury, and slip/fall cases, metallurgical research, and investigations involving aerospace and automobile products, including bicycles, to electrical failures including battery, motor & generator.

Areas of Expertise:

Electrical Failures Motor/Generator Failures Battery Failures Accident Reconstruction Tire Defects Machinery & Equipment Failures Construction Equipment Failure

Aircraft Engine/Structural Failure Structural Engineering Mechanical Metallurgy/Materials Failure Fatigue & Corrosion Product Failure Analysis Bicycle, Ladder, Slip/trip & fall Building Construction & Defect Analysis

Education: We have highly experienced and qualified staff:

PhD, Engineering Science & Materials, Virginia Tech

PhD, Electrical Engineering, Georgia Tech

PhD, Mechanical Engineering, Auburn University

BS, Structural Engineering, Century University

BS, Civil and Construction Engineering, Kansas State University

BS, Mechanical Engineering, S.U.N.Y., Buffalo, NY

MBA, Technology Management, Florida Institute of Technology

Certifications:

PE – Registered Professional Engineers

CMfgE – Certified Manufacture Engineer

Professional Affiliations:

Southern Law Association

Atlanta Claims Association

American Society of Mechanical Engineers

Institute of Electrical and Electronics Engineer

American Society of Civil Engineers

American Society of Materials

American Society of Nondestructive testing

American Welding Society

American Society of Testing Materials

Society of Aerospace, Materials and Process Engineers

Principals:

Dr. Ash Thakker, PhD, PE, FASM,FSME, CMfgE (Structures, Materials, Fatigue, Fracture, Composites, Damage Tolerance)

Mr. George Kremer, BSME, AAS (Metallurgy, Corrosion, Coatings and Mechanical Failures)

Dr. Nicholas Propes, PhD (Electrical Machinery Failures, Maintenance Systems, Testing and Analysis)

Dr. Freeman Rufus, PhD (Battery/Motor/Generator Failure)

Dr. Seungkoo Lee, PhD (Electrical System,)

Dr. Jyoti Ajitsaria, PhD (Mechanical Failures)

Mr. Mike Healy, BS (Civil, Construction Engineering, Buildings)

Mr. Ralph Cunningham, BS (Physical Testing, Accident Reconstruction)

---

KnightHawk Engineering, Inc. is a technology based Specialty Engineering Company that performs consulting, field services and testing. They do this with a broad spectrum of experience-based personnel utilizing a multi-discipline integrated systems approach. Using the same approach KnightHawk develops and manufactures performance enhancement products. KnightHawk Engineering is frequently called on to solve the most difficult and challenging problems in industry which need to be solved within aggressive time constraints, without sacrificing safety, quality, or performance.

KnightHawk Engineering have made their mark in the analysis of static equipment including selective linear exchangers, quench coolers, furnace tubes, pelletizing dies, and blow-down systems into closed headers. Rotating equipment analysis includes machine and structural dynamics, evaluation of acoustic pulsation, and rotordynamic modeling. They have also established a good reputation in specialty machinery design and third party design audits.

Cliff Knight is President of KnightHawk Engineering and a Professional Engineer with 36 years of experience. Besides his corporate responsibilities as President, Mr. Knight is also Chief Engineer. Mr. Knight specializes in design, failure analysis and troublshooting in static rotating equipment. He has 21 years of experience in utilizing computer applications, which include Finite Element Method, Numerical Modeling, Heat Transfer, Pipe Stress Analysis and Computer Fluid Dynamics.

While with KnightHawk, Mr. Knight has developed proprietary tools and methods for performing analysis on Pelletizing Dies, Presure Vessels, Heat Exchangers and Centrifugal Compressors. He holds four patents related to this work. Before coming to KnightHawk, Mr. Knight spent ten years at Dow Chemical, U.S.A., where he acheived the position of Sr. Mechanical Engineering Specialist and Group Leader.

Services Include:

FEA – Linear / Nonlinear – Elastic / Plastic CFD – Transient and Steady State Fitness for Service Pipe Stress Machine Design Rotating Equipment Repair Pressure Vessel / Heat Exchanger Design Thermosyphon Analysis – Complex Systems Process Simulation on Static and Rotating Equipment Rotordynamics Heat Transfer

Thermodynamics Water Hammer / Steam Hammer Structural Dynamics Earthquake Analysis Off Shore Wave / Wind Analysis Code Compliance Risk Assessment Catastrophe Investigation Vehicle Dynamics Controls Analysis Third Party Design Audit

Specialty Areas Include:

ASME Code Compliance Boilers Compressors Critical Piping Systems Elastic / Plastic FEA Fit For Service Analysis Heat Transfer Driven FEA Engines Flow Induced Vibration Furnaces Reciprocating Pumps and Compressors

Gas and Steam Turbines High Pressure Reactors Pelletizing Dies Selective Linear Exchangers Specialty Equipment Design Steady State / Transient CFD Analysis of Static and Rotating Equipment Structural Analysis Transfer Line Exchangers Vessel Alterations and Repairs Process Performance Analysis of Static and Rotating Equipment

Crash Group at Robson Forensic

The crash group at Robson Forensic consists of Experts in Crash Reconstruction, Vehicle and Highway Engineering, as well as Commercial Trucking and Fleet Operations. We have experts who specialize in all types of vehicles, including trucks, buses, motorcycles, trains, bicycles, and forklifts. When appropriate, the Crash Group is supported by specialists in disciplines that impact vehicle crashes such as conspicuity, lighting, meteorology, biomechanics, human factors, and dram shop.

Our Crash Group consists of more than 20 experts across 17 locations. Please contact one of our experts directly to discuss your case and determine which of our experts is most appropriate to assist with your matter.

Thomas P. Lacek, P.E.
Crash Reconstruction & Occupant Kinematics

Tom can piece together a vehicle from start to finish: the brake system, transmission, shocks, engine, power steering, air conditioning, fuel systems. He has 30 years experience in automotive engineering with expertise ranging from used and new vehicles to antiques and classics. His vehicle expertise also includes areas of product liability, specializing in engine, transmission, ABS, sudden acceleration, brakes, steering, suspension, seat belt, air bag and other vehicle failures. Tom is a Professional Engineer, a member of the Society of Automotive Engineers, and the Association for the Advancement of Automotive Medicine and is ASE certified. View Curriculum Vitae

Erin M. Shipp, P.E.
Heavy Truck & Bus Engineering

Erin brings more than 35 years experience designing, testing, and building heavy trucks, buses, motor homes and passenger vehicles. Specializing in vehicles as small as the Chrysler Pacifica and as large as Thomas Built Buses and Freightliner trucks; Erin's experience includes engines and emissions; chassis; bodies and sleeper boxes, including handicap accessibility; as well as overall structural stability for crash performance. Erin is a Professional Engineer with experience testifying in heavy truck cases. View Curriculum Vitae



Erin B. Higinbotham, P.E.
Motorcycle & ATV Expert

Erin is a two-time national champion with the American Motorcyclist Association. He has more than 30 years experience with operation, maintenance and design of motorcycles and ATV's. As a Project Engineer for the Automotive Testing Laboratories and TRC Inc., he completed federal regulatory testing on motorcycles and ATVs. He has completed contract testing for several US and foreign motorcycle manufacturers. Erin has completed plaintiff and defense casework across the United States and Canada. View Curriculum Vitae