|
|
|
|
|
|
|
To best assist our users, Experts.com provides the option of sending a synopsis
of your inquiry to the Experts that you deem qualified to assist you. Please place
a check mark in the box next to the experts that you wish to contact; then click
on the "SynapsUs" button on the bottom of the page. To
learn more about SynapsUs, click here. |
|
|
The following 12 experts are listed under this category:
|
|
| Page: 1 of 1 |
Page Index : |
|
|
|
Expertise: "Handling Difficult and Complicated Matters" $140 per hour Accidents, Accident Reconstruction, Collisions, Biomechanics, Injuries, Safety Engineering, Seatbelts, Child Seats, Airbags, OSHA Compliance, Industrial Safety, ForkLift Truck, Federal Motor Carrier Safety Regs FMCSA, Federal Motor Vehicle Safety Regs FMVSS, Material Handling, Cranes, Scaffolds, Ergonomics, Helmets, Products Safety, Motorcycle, Trucks, Bus, Vehicles, Pedestrians, Bicycles, Bikes, Rollovers, Slip Trip & Falls, Animations, Building Codes, Safety Regs, Construction Site Safety, Amusement Rides, Tools, Tires, Vehicle Fires, Construction Equipment, Transportation Regulations, Injuries, Low Speed Impacts, Work Zones, Machine & Equipment Guarding, Human Factors, Hazards, Premesis Liability, Building Codes, Handicap ADA Standards, Regulations, CDR Crash Data Recorder, Mechanical Parts, Brakes, Traffic Signs & Control Devices, Industrial Products, Warning Signs, Ergonomics. 30 years exp. experts, BSOSH, MSOSH, PhD Safety Engineering & Injury Biomechanics, PSP, CECD
See web site for additional info or email us.
|
|
|
|
|
|
|
PROPERTY MANAGEMENT EXPERT Depositions: 800+Mediations & Arbitrations: 100+Trial Testimony: 75+More than 10,000 properties inspected.
AREAS OF EXPERTISEStandard of Care; Custom and PracticeBuilding & Safety CodesFair Housing PracticesPersonal Injury (Slip, Trip & Fall)Premises LiabilityLandlord/Tenant
PROPERTY TYPESApartments Managed: 25,000+Homeowners Associations Units Managed: 100,000+Commercial Buildings Managed: 1,250,000 sq.'Shopping CentersMobile Home ParksHotels & Motels: 850+ Rooms
RETAINED BY 200 LAW FIRMS IN 15 STATESCalifornia, Arizona, Nevada, FloridaTexas, Ohio, New Jersey, ColoradoIdaho, Hawaii, South Carolina, Alabama North Carolina, Tennessee, Pennsylvania
|
|
|
|
|
|
New Jersey Office: PMB 4066 55 Madison Avenue - Ste 400 Morristown, NJ 07960 T: (973) 401-0010 F: (973) 401-0056 | | New Hampshire Office: Analytic Engineering 105 Juniper Ridge Road Gilford, NH 03249 T: (603) 293-4477 F: (603) 293-4142 |
Analytic Engineering combines Professional Engineering with Effective Communication. We offer Technical Analysis and Services in the Engineering field and provide experienced Expert Testimony to communicate the conclusions reached.
Engineering Services:| Mechanical EngineeringSafety EngineeringVehicular Accident ReconstructionFailure AnalysisComputer Animation | Premises LiabilityPatent Claim AnalysisProduct Design & LiabiltyProduct & EquipmentDesign Engineering Services |
Steven R. Thomas, PE, the Principal Engineer at Analytic Engineering, earned his Bachelor of Science - Engineering (Mechanical and Electrical) at Widener University, Chester, PA in 1979 and a Master of Science in Engineering Science (Safety Engineering and Human Factors) at The New Jersey Institute of Technology in 1997.
Professional Experience: Steven R. Thomas, P.E. has worked for such organizations as General Motors, Thomas & Betts, General Cable and Breed Automotive Corporation. He has worked in the engineering fields of Research and Development, Product Design, Machine Design, Manufacturing, Industrial, Tooling, Safety, Facility Design, Failure Analysis and Accident Reconstruction. Since 1991 Mr. Thomas has worked as an Engineering Consultant in the Forensic field and has testified in numerous jurisdictions.
|
|
|
|
|
|
|
B.E.C. Consulting, LLC was established in 1982. Since that time, we have provided top-level consulting engineering services and accident reconstruction to our clients; law firms, insurance companies, state and local agencies, manufacturing companies, and clients who are seeking product design analysis and other engineering related services.
Our engineers represent a broad range of engineering disciplines which enables us to work on a variety of cases using the team approach. The teams at B.E.C are comprised of Engineers, Technical Specialists, Graphics Specialists as well as Research and Administrative Personnel, so that each case is given personal attention and is handled efficiently and effectively. We are located in Tallahassee, Florida, but are active in AL, GA, MS, TN and SC. We have worked in almost every state in the United States, including Alaska.
Areas of Expertise: All Areas of Accident ReconstructionFailure AnalysisProduct DesignProduct DevelopmentProduct DeliveryMaterial Handling SystemComputer Animation, Electronic Graphics and Video Reenactment
Every aspect of our firm is designed to serve our clients needs; conference rooms for mediations and depositions, a research and testing lab, secured evidence storage, facilities for expert inspections, and easy access to airport and hotel facilities for our out-of-town clients. We are truly a full service engineering firm.
Because of this team approach and a commitment to customer service, B.E.C. has attained regional and national recognition as a leader in forensic engineering services and new product development. This excellent example and tireless dedication to serving our client’s needs has resulted in a devoted client base and reputation second to none.
Dr. Charles Benedict founded Benedict Engineering Company in 1982. He has over 35 years experience in the fields of product and machine design and analysis, vehicular accident reconstruction of all types, and product and system failure analysis. He has designed, developed, manufactured, and tested more than sixty different products and machine systems. Dr. Benedict is well respected in the fields of forensic engineering, product and machine system design and analysis and patenting.
Expertise:| BiomechanicsOccupant KinematicsVehicle Restraint SystemsVehicle ControlabilityMaterial HandlingPatent Infringement | Automobile AccidentsPedestrian AccidentsGeneral EngineeringProduct DesignFire and Explosion AnalysisTractor / Trailer AccidentsElectrical Issues |
Dr. Jim Dobbs is a principle in the organization and has been practicing forensic engineering for the past 12 years. He was a design/development engineer at General Electric for a decade prior to coming to BEC Consulting. He has extensive experience in product development and design and hold several patents. He is nationally known for metallurgical failure analysis and accident reconstruction. He has particular experience and knowledge with motorcycles and tractor-trailer accidents.
Expertise:| MetallurgyMedical DevicesRailroad AccidentsSeat Belts and Airbags Seatback AnalysisAutomobile Accidents | Pedestrian AccidentsGeneral EngineeringProduct DesignSlip / Trip / FallTractor / Trailer Accidents |
Dr. Brian Pfeifer is also a principle with BEC Consulting, and has been practicing forensic engineering for over 15 years. He holds several patents on roadside safety devices and studied roadside safety at the University of Nebraska. He has considerable knowledge about maintenance of traffic plans and traffic engineering. He is equally knowledgeable about accident reconstruction, especially involving tractor-trailer accidents.
Expertise:| Roadside HazardsVehicle ControllabilityOccupant KinematicsRoadway DesignGuardrails and BridgesBiomedical Engineering | Automobile AccidentsPedestrian AccidentsTractor / Trailer AccidentsSlip / Trip / FallProduct DesignGeneral Engineering |
Dr. Ying Lu
Expertise:| Biomedical AnalysisOccupant KinematicsInjury CausationLow Speed AccidentsRecreational InjurySports InjuryGeneral Engineering | Accident ReconstructionPedestrian AccidentsBicycle AccidentsSlip / Trip / FallProduct DesignErgonomicsHuman and Environment Interaction |
Ms. Tracy Campbell
Expertise:| Industrial AccidentsSafety AnalysisProduct Design / Failure AnalysisSlip / Trip / FallGuarding / WarningsWorkplace SafetyBicycles | OSHA RegulationsPedestrian AccidentsAutomobile AccidentsTractor / Trailer AccidentsFire and ExplosionTheme ParksAirbag and Black BoxGeneral Engineering | Mr. Chris Yates
Expertise:| Black Box AnalysisMotorcycle / BicycleMechanical DesignProduct Guarding DesignFire and ExplosionSeat Belt Analysis | Automobile AccidentsPedestrian AccidentsGeneral EngineeringProduct DesignTractor / Trailer AccidentsSlip / Trip / Fall |
|
|
|
|
|
|
|
H. Harvey Cohen, Ph.D., CPE – Dr. Cohen is the Senior Partner of EAI. He has over 35 years of professional experience in Human Factors and Safety. A former Federal government research scientist, Dr. Cohen has over 150 refereed publications, including 8 books and book chapters, has investigated over 7,500 injury accidents, has given over 1,250 depositions and has testified in court on over 350 occasions, equally for plaintiff and defense, in 38 states, territories and Canadian provinces.
Specializations: Human FactorsSlips & FallsWarningsPremisesProductsWorkplaceMotor & Commercial VehiclesPedestriansPerception-ReactionVisibility/LightingSafety Standards of Care
|
|
|
|
|
|
|
Company Profile:
For more than 35 years, ITC has provided Forensic Engineering, consulting and expert testimony to thousands of law offices, insurance companies and government agencies. Our qualified team of engineers and scientists, covering hundreds of areas of expertise, are available to assist you in technical evaluations, scientific analysis, testimony and preparation of cases for trial. Additional experts are available when more than one specialty is required. We also provide constant case and project management to help expedite the need to your litigation in a timely manner.
Major Areas of Expertise: Amusement Parks & Rides Apparel/Textiles Automotive Safety & Accident Reconstruction Biomedical/Biomechanical Injury Analysis Biomechanics, Boating & Marine Safety Chemicals & Chemical Engineering Civil Engineering/Structural Failures Construction Accidents Electrical & Mechanical Engineering Firearms & Explosives Fires & Explosions Fire Investigations & Explosions Flammable Fabrics | Helmets/Motorcycle, Bicycle Sports & Industrial Machinery Guarding Medical Devices Medical Emergency/EMT Metallurgy & Material Sciences Parks & Playgrounds Slips, Trips & Falls Sports/Recreation/Aquatics Toxicology/Industrial Hygiene Transportation & Highway Safety Vocational Rehabilitation Warnings & Instructions Analysis |
Services provided nationally from our New York Offices.
Visit our website for more than 50 Condensed Expert CV's.
|
|
|
|
|
|
|
James Madden, PE has over 40 years of Engineering experience, which includes 26 years in Forensic Engineering and 15 years in Engineering Design and Construction Assistance. Mr. Madden has prepared over 600 written reports and over 60 affidavits in lieu of written reports. He has testified in over 90 depositions and over 75 trials, in local, state and federal courts in several states.
Since 1983, the firm has specialized in the investigation, analysis, and reconstruction of mechanical accidents, and the analysis of safety issues with products, equipment and facilities associated with mechanical accidents. Accidents / incidents analyzed include mechanical accidents with a chemical component, and other incidents involving chemicals.
Analysis and Reconstruction Experience includes: Consumer product accidentsIndustrial and commercial equipment accidentsIndustrial, commercial, and construction accidents Building and property accidents, including slip, trips & fallsTraffic accidents, including roadway facility analysisChemical, gases & materials accidentsFires & explosionsIncidents of hazardous combustion, including heating system malfunctions with carbon monoxide poisoning, and furnace explosionsHuman factors involved in the incident / accidentCodes and standards applicable to the product, equipment or facilityWarnings and safety design, and the application of the safety hierarchy A Curriculum Vitae and Fee Schedule are available upon request.
|
|
|
|
|
|
|
Michael S. Johnstone, AIA has been a licensed Architect since 1975 and a Golf Course Architect since 1985. He has practiced throughout the United States and completed over $ 200 million in construction. He is a licensed architect in North Carolina and California.
As an Expert Witness, Mr. Johnstone has consulted, been deposed, appeared in court and participated in arbitration proceedings on matters including: Premises LiabilityConstruction and Design DefectsArchitecture and Interior Design, Golf Cart accidents, Architectural copyright infringement Forensic Services:Consulting & ReportingSite Surveys & Digital PhotographyGraphic PresentationConstruction & Replacement Cost EstimatingDepositions & Court Testimony Areas of Expertise:Golf Courses, Clubhouses, Driving Ranges & Golf Learning CentersShopping Centers & Retail StoresRestaurants & CafesParking Lots & GaragesCustom HomesCommercial RenovationsMulti-screen Movie Theatres
|
|
|
|
|
|
|
*Serving California, Arizona and Nevada Exclusively
Arizona Office: 6619 N. Scottsdale Road Scottsdale, AZ 85250 T: (480) 347-0211 | Nevada Office: 2620 Regatta Drive, Suite 102 Las Vegas, NV 89128 T: (702) 733-8711 |
Providing Expert Assistance in Case Evaluation, Investigation, Preparation and Testimony for matters involving:| Guard / Bouncer / Investigator ConductUse of ForceDetention & ArrestPremises Security IssuesSecurity Adequacy Assessment | Crime Prevention TheoryBuilding & Site Security DesignWorkplace Violence IssuesUnlicensed Security ActivityState & Local Regulatory Compliance |
Robert A. Gardner, CPP is a "Board Certified" Security Management Professional with multi-state security consultant, private patrol and private investigator "Qualified Manager" licenses. His background includes more than 39 years of training and "hands on" experience in evaluating, developing, and managing security and crime prevention programs. For 25 of those years he served as both a private sector security professional and a public sector Peace Officer.
He has been retained on more than 140 occasions and has qualified and testified as a security expert in United States District Court and in various California, Nevada, and South Dakota State Courts.
Areas of Expertise:- Conduct, Operational Policies, Standards & Procedures, Licensing Requirements and Unlicensed Practices involving Private Patrol Companies, Private Investigators, Security Consultants, Contract and In-House Security Officers, Retail Loss Prevention Agents, Bouncers, Bodyguards, Security Expert Witnesses and other security related personnel.
- Premises Security Adequacy & Negligence, Building & Site Design for Security, Security and Crime Prevention Standards and Practices in Apartments, Hotels, Bars, Nightclubs, Casinos, Retail Stores& Centers, Office Buildings, Parking and Special Use Facilities.
- Small Airport and General Aviation Security, Theft and Vandalism of Aircraft and Avionics, Protection of Airport Property, Employees, Tenants and Guests.
|
|
|
|
|
|
|
Construction Practice at Robson Forensic
The Construction Practice at Robson Forensic consists of experts in architecture and civil, structural, mechanical, and electrical engineering. Our experts have designed, built and maintained residential, industrial, institutional, municipal, heavy civil and commercial buildings and structures.
Our Construction Group consists of more than 50 experts across 17 locations. Please contact one of the practice group leaders below to discuss your case and determine which of our experts is most appropriate to assist with your matter.
Mark E. Williams, AIA, NCARB Architectural / Professional Liability Expert
Mark is a broadly experienced architect with a diverse career that included new construction, adaptive-reuse, and renovation projects on a wide range of building types and occupancies. Through his 25 years of experience and his focus on problem solving, Mark provides technical investigations and expert analysis on construction contract disputes, large construction defect claims, and matters of architect professional liability including claims of bad faith. View Curriculum Vitae
Brent Leisenring, P.E. Civil Engineering / Construction Safety Expert
Brent is a Civil Engineer with more than 30 years of hands-on experience in construction and engineering. He has experience in construction as a contractor, construction manager, engineer, subcontractor and material supplier on projects ranging from single-family dwellings to oil refineries. His unique background and experience qualify him to analyze the actions and responsibilities of all parties involved to determine liability for defective construction as well as unsafe conditions on construction sites. He is a Professional Engineer in five states and has testified in several states. View Curriculum Vitae
Dale Cagwin, P.E. Building Systems Expert
Dale’s experience includes over 20 years as a mechanical engineer designing, testing and maintaining building systems including fire suppression, HVAC, plumbing, gas, water and sewage in a variety of commercial, industrial, institutional and municipal buildings. Dale has served on standards writing committees and worked with product approval agencies. He is a P.E. in seven states, a Certified Fire Investigator and has testified in a broad range of building systems cases. View Curriculum Vitae
|
|
|
|
|
|
|
Robson Forensic is an integrated team of forensic engineers, architects, scientists and fire investigators. Our experts include civil, construction, mechanical, structural and electrical engineers, architects and certified fire investigators. We have specialized expertise in unique areas such as aquatics, dram shop, injury causation, medical devices, motorcycles, supervised care, and tire failures.
We are a national firm with 14 offices and more than 150 high quality experts who assist in the resolution of disputes and litigation. We have performed over 30,000 cases in our 20+ years and offer clients the reassurance of peer review and personal follow through not found with a referral service.
Primary Practice Areas: | Admiralty / MaritimeAgricultural / FoodBiomechanicsConstructionComputers & TechnologyCriminalDram Shop / Liquor LiabilityEducation / SupervisionEnvironmental | Fire / ExplosionHuman FactorsMedicalMotor VehicleOccupational Health & SafetyPremises LiabilityProduct LiabilitySports & RecreationWorkplace |
Services:
Investigation Investigations are as varied as the events themselves and are tailored to appropriately address the matter at hand. They create the foundation for piecing together the series of events, and developing hypotheses as to what occurred and why.
Testing/Analysis We perform a variety of tests for our clients. In certain product liability cases we perform tests on exemplar products, which allow us to evaluate the product performance under conditions similar to the actual event. We also develop testing protocols to evaluate the strength of materials, the flammability properties of various products, slip-resistance of shoe soles or walkways, and we conduct failure analysis. In the analysis process, the facts and data gathered during the investigation are examined in detail. Hypotheses are developed and tested against the facts in the case, and relevant science.
Reporting Our reports clearly convey the issues we were engaged to address, the material we reviewed to examine those issues, the scientific and technical basis of our investigation, and our expert opinions as they apply to the issues. In some cases, our reports can be concise, two page documents. More complicated matters require lengthy documents encompassing all of the integral details including calculations and the application of scientific principles. Each client receives the highest quality work product that communicates our expert opinion and the supporting documentation for those conclusions.
Deposition/Testimony Some cases and claims require the testimony of experts. Whether through affidavit, deposition or courtroom testimony, our experts are prepared to clearly explain to a fact finder, jury or arbitration panel the technical aspects of each case in a manner that can be understood by the non-expert. We assist our clients in preparing to obtain testimony of the opposing experts and to understand the technical relevance of their testimony.
|
|
|
|
|
|
|
Experience: 40 years experience in construction, construction management, safety and related. Unusual combination of safety engineering and construction and civil engineering permits separate areas within construction, safety, and premises liability. 6 years Instructor at UCLA Evening Extension in Engineering & Construction Management, and 4 years US Navy Seabees Instructor for Construction Management - Port Hueneme, CA and Gulfport, Mississippi.
Licenses: Dr. Stephen C. Wexler, PE holds Licenses in Civil Engineering, Safety Engineering and is a "B" License General Contractor.
Services: 50% of business in Construction Management in working with Owners, Contractors & Subcontractors in their Building Programs and 50% of business activity in Forensic Engineering in working with Attorneys in a variety of case types.
Qualified Expert Witness: Testimony over 16 years in + / - 200 trials and + / - 500 expert depositions. Backed by a research staff of engineers. Both plaintiff & defense. High integrity & solid record - No skeletons or conflicting testimony. Litigation savvy with attractive record of Jury appeal.
Other Expertise: Members of Wexco International have additional expertise in: Quality Control; Building and Design Codes; Earthquake / Fire / Flood Damage; Roofing; Waterproofing; Paints; Plaster; Flooring; Critical Path Method Scheduling; Delay Impact Analysis; Accidents relating to Scaffolds, Ladders, Forklifts, Guardrails, Cranes, Manlifts, Use of Tools, Electrocutions, Bulldozers, Stacking; Parking Lots, ADA Regulations; Electric Gates; Construction Area Traffic Control; Roadway Maintenance; Visibility; Lighting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|