Peter R. Walsh, PE, is a Licensed Professional Electrical Engineer with over 35 years of experience. He is an NFPA 70E Certified “Electrical Safety Compliance Professional” and OSHA “Authorized Trainer” for General Industry Training.
Background - Mr. Walsh joined General Electric Company early in his career as a Field Engineer. Since then, he has seen many electrical incidents in a variety of roles and companies. He has specialized background with incidents in the proximity of electrical equipment, such as fuses, and provided application assistance for a total of 20 years with the largest fuse companies.
Mr. Walsh has applied electrical products in accordance with National Electrical Code, OSHA regulations, IEEE Standards, and good practices. He has provided technical leadership to electrical industry codes and standards organizations. Presently he is a member of Code Making Panel 10 of the National Electrical Code, which is responsible for Overcurrent and Service Protection. His first appointment to the National Electrical Code was for the 2008 code cycle.
Mr. Walsh served on other NFPA technical committees such as 110 and 111 and also participated in meetings with NFPA 70E committees. NFPA recognizes him as Electrical Safety Compliance Professional. Within IEEE, he has served this Standards Organization so long as to obtain Lifetime Membership. He has written numerous articles about arc flash, arc flash calculations, surge arrestors, and general electrical industry equipment.
Training Services - He focuses on training electrical maintenance people and their management in the latest Safety Standards- NFPA 70E, OSHA General Industry, and the National Electrical Code. Mr. Walsh customizes the courses to client needs, from new general maintenance people to Engineering Managers.
Areas of Expertise:
|Components & Machinery|
Metallurgy & Corrosion
Dynamics of Impact & Collisions
Friction Analysis / Slips, Trips and Falls
Intellectual Property & Patent Review
Accident Reconstruction / Animation
Computer Aided Design
Education & Training
|Electrocution & Switch Malfunction|
Grounding & Lightning Protection
Lightning Impulse Testing
Products and Premises Liability & Safety
High-Voltage & Current Power Systems
Bridge Design and Safety
Fire & Explosion Cause and Origin
And Much More...
|Credentials:||B.S., M.S., M.Eng., M.B.A., J.D., and Ph.D. Degreed|
Licensed Professional Engineers in Mechanical, Electrical, and Civil Engineering
Tenured University Professors and Professionals
NAFI Certified Fire and Explosion Investigators (CFEI)
Licensed Master Electricians
|Competence:||Over 80 Combined Years of Experience in Engineering R&D, Industry, Academia, Consulting, and Expert Witness Litigation Support|
Over 120 Combined Deposition and Court Testimonies
|Credibility:||Internationally Recognized in Our Areas of Expertise|
More Than $19 Million in Peer-reviewed and Funded Research Grants
Over 200 Combined Scientific Publications and Journal Articles
|Communication:||Over 20 Different Undergraduate and Graduate-level University Courses|
Over 30 Invited Short Courses, Talks, and Lectures
|Failure Analysis||Accident Reconstruction|
|Fire & Explosion Analysis||........Safety|
John C. Pfeiffer, P.E. has a long history in accident investigation and forensic engineering service going back to before the company was founded. John C. Pfeiffer, P.E., principal engineer, has practiced in the field of forensic engineering since the early 70’s with over 175 investigations completed or still in process. Investigations cover a wide variety of causes from product failure, material properties, and software inadequacies to human errors.
Experience includes electrical engineering, instrumentation, industrial process control and industrial automation engineering with in-depth experience in additional areas such as grounding, lightning protection, surge protection and power systems design. Also software based industrial systems such as programmable logic controllers and high level control systems. Performed many arc flash hazards analysis and other analysis.
Primary experience is in Industrial Design. Besides assisting in investigations we can help in determining corrective action to prevent the reoccurrence of similar accidents. Published in professional journals. Works equally for the plaintiff and defense. Primary business - design of electrical systems for industry.
Field Of Expertise:
Auto • Airbag • Bicycle • Boating • Bus • Chair Design / Safety / Failure • Diving and Drowning • Electrocution and Shock • Elevator • Escalator • Fires and Explosions • Forklift • Gate • Golf Cart • Highway Design and Safety • Ladder • Law Enforcement • Lighting & Illumination • Loading Dock • Metallurgy • Motorcycle • Paintgun • Playground Safety • Press • Ramps • Rollercoaster • Safety Guards • Scaffolding • Seatbelts • Slip / Trip and Fall • Spas • Stairs • Swimming Pool Design and Safety • Tractors • Trailers • Trucks • 3D Scans
John E. Averrett‚ PE, LEED AP - A Licensed Professional Engineer in 11 states, John Averrett specializes in electrical shock/electrocution and lightning damage cases involving death, personal injury, utilities, industrial equipment failure, vehicular accidents, fire cause/origin, contract, and construction disputes.
Areas of practice include: Alabama, Florida, Georgia, Mississippi, Tennessee, South Carolina, North Carolina, Kentucky, Arkansas, Louisiana, and Texas; other states by comity.
John Averrett is Executive Vice President of Goodwyn Mills & Cawood headquartered in Montgomery, AL. He has more than 24 years' experience in plan development for municipal, industrial, commercial and residential clients. Mr. Averrett is a recognized expert in the electric utility and distribution/transmission industry and coordinates a group of over a dozen other electrical engineers and designers. He also acts as a consultant to several electrical contractors to facilitate their arc flash safety programs.
Litigation Support - Mr. Averrett offers expert witness services to attorneys representing plaintiff and defendant. He provides site review, thorough reporting, deposition, and trial testimony as needed nationwide.
Fire & Risk Engineering provides Fire Protection and Risk Management solutions for projects involving industrial, commercial, institutional, mercantile, transportation, educational, residential, and complex public facilities. They apply scientific laws to fire analyses in order to form a solid foundation for indisputable arguments. In addition, Fire & Risk Engineering provides the experience to identify, interpret and explain the relevant codes, standards, regulations and industry practice that affect the determination of responsibility.
Robert Malanga, P.E., holds degrees in Fire Protection Engineering as well as in Technology Management and the Electrical/Electronic field. For over 28 years, Mr. Malanga has dedicated his career and avocations to Fire Protection, Life Safety and Risk Management. As a result, he is experienced in analyzing the development and spread of Fires and Explosions as well as evaluating the design and performance of fire protection systems. He has provided expert testimony on the subjects of fire and explosion phenomena; cause and origin; fire behavior, spread and development; design, adequacy and performance of public/private fire protection systems; fire prevention; fire protection and building codes; fire resistant construction and fire safe building design.
Electrical Safety Group Inc. provides consulting services in Occupational Electrical Safety for matters critical to electrical safety, including:
Partner and Principal Consultant, H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries.
Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. For more than 35 years, Mr. Floyd has focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program.
Author / Speaker - Actively involved in professional organizations spanning electrical engineering, occupational health and safety, and maintenance and reliability, Mr. Floyd has authored or co-authored more than 70 papers and articles and has given more than 150 presentations at conferences, seminars and webcasts in his work to advance the practice of electrical safety. He has been an invited speaker on electrical safety in Australia, China, Brazil, Western Europe, and throughout North America.