1 Source Safety and Health, Inc. is a Safety and Health Management and Consulting firm for educational, insurance, commercial, residential, research, healthcare, and manufacturing facilities. 1Source’s team of professionals includes certified industrial hygienists, certified safety professionals, certified professional environmental auditors, and a certified professional ergonomist who can address every safety and health issue. One key measure of their success is that 1Source is the largest safety and health consulting firm with the most certified staff on the east coast. For more than 20 years, the professionals at 1Source have been committed to developing long-term, mutually beneficial professional relationships with our clients and business partners. Indoor Air Quality Management and Consultation:
Safety Management Systems:
Asbestos and Lead Management and Consultation:
|Investigative Engineering||Preventive Engineering|
|Safety / Ergonomics||Consulting Engineering|
Analytic Engineering combines Professional Engineering with Effective Communication. We offer Technical Analysis and Services in the Engineering field and provide experienced Expert Testimony to communicate the conclusions reached.
Steven R. Thomas, PE, the Principal Engineer at Analytic Engineering, earned his Bachelor of Science - Engineering (Mechanical and Electrical) at Widener University, Chester, PA in 1979 and a Master of Science in Engineering Science (Safety Engineering and Human Factors) at The New Jersey Institute of Technology in 1997.
Professional Experience: Steven R. Thomas, P.E. has worked for such organizations as General Motors, Thomas & Betts, General Cable and Breed Automotive Corporation. He has worked in the engineering fields of Research and Development, Product Design, Machine Design, Manufacturing, Industrial, Tooling, Safety, Facility Design, Failure Analysis and Accident Reconstruction. Since 1991 Mr. Thomas has worked as an Engineering Consultant in the Forensic field and has testified in numerous jurisdictions.
|New Jersey Office:|
55 Madison Avenue - Ste 400
Morristown, NJ 07960
T: (973) 401-0010
F: (973) 401-0056
|New Hampshire Office:|
105 Juniper Ridge Road
Gilford, NH 03249
T: (603) 293-4477
F: (603) 293-4142
Dr. Randall Atlas AIA , CPP is a Registered Architect, NCARB certified, and he practices Criminal Justice Architecture and Environmental Security Design. Atlas is a certified protection professional (CPP) with the American Society of Industrial Security (ASIS), and is an appointed member of the ASIS Security Architecture and Engineering Committee. Atlas has his doctorate in criminology and a masters of architecture. Dr Atlas is a member of the American Institute of Architects (AIA) Architecture for Justice Committee.
Dr. Atlas has taught CPTED (Crime Prevention through Environmental Design) and criminal justice courses at Florida International University, Florida Atlantic University, and the University of Miami, Keiser University, and he is a trainer with the National Crime Prevention Institute at the University of Louisville. Dr. Atlas has been a technical Assistance consultant with the National Institute of Justice, National Institute of Corrections, and the Florida Department of Corrections and U.S. HUD Drug Elimination CPTED Program.
He has conducted ADA accessibility compliance audits for private and public sector clients, and served as an expert witness on over 200 premises liability lawsuits.
Dr. Atlas has been a speaker and trainer at security conferences from New Delhi, India to Seattle, Washington and has written over 200 articles in various publications on security, safety, and counter terrorism issues.
Dr. Kevin A. Rider, PhD, PE, CPE of Forensic Human Factors, LLC., providing investigations and expert testimony regarding predictable human behavior, particularly as it relates to motor vehicle and pedestrian collisions, premises liability, and slips, trips and falls, the design and use of products, and adequacy of warnings/instructions. His work focuses on identifying the Human Factors Elements that lead to unfortunate incidents, and what should have been done to prevent them.
Dr. Rider is a Licensed Professional Engineer and Certified Professional Ergonomist, and has studied human movements and behavior, and served as a human factors consultant since 1999, including five years teaching industrial engineering and occupational safety courses at West Virginia University. He has presented at professional conferences, both nationally and abroad, and his research is published and cited in a number of peer-reviewed journals. He continues to serve as a reviewer for conference and journal manuscripts.
Dr. Rider has testified over 100 times, and excels at educating attorneys and jurors. His services are available to attorneys for both Plaintiff and Defense.
Areas of Expertise:
Dr. Eric N. Brown, CIH, CSP, is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP), with both certifications in good standing with the issuing boards. Dr. Brown holds a Doctorate in Public Health with an Industrial Hygiene specialization from the University of California at Los Angeles, and a Master’s degree in Public Health with an Occupational Health specialization from the Medical College of Ohio. He has over 20 years of experience in:
Litigation Support - Dr. Brown has been a designated expert in hundreds of cases, been deposed dozens of times, and has testified successfully in both trials and arbitrations. His services are available to attorneys representing both plaintiff and defendant.
Areas of Expertise:
The experts at Miller Engineering are Ann Arbor-based professional engineers celebrating 35 years of service to University, Government, Insurance, and Industry through research, publications, presentations, and testimony. Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors fields of engineering with specific knowledge in the following areas: Vehicles
Mechanical & Electrical Safety
Warnings & Instructions
Chemicals Safety & Labeling
Chemical Exposures & Workplace Safety
Fires & Explosions
Insurance Subrogation & Forensics
|James M. Miller, PE, PhD – Founder Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 35 years of experience as an expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, recreational vehicles (ATVs, boats, and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, CPSC, ANSI, ASTM, UL, etc.).|
|Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage and product information effectiveness.|
|Bradley T. Cook, PE – Managing Engineer Bradley is a registered professional engineer and consultant with extensive experience in accident reconstruction. He specializes in vehicular accident reconstruction and has investigated hundreds of vehicle accidents involving cars, trucks, pedestrians, bicyclists, motorcycles, etc. Bradley also has experience in product safety and hazard analysis; occupational safety and health (OSHA) compliance; pedestrian and worker slip and fall prevention; investigation and reconstruction of industrial and consumer product accidents. He holds a Bachelor of Science in Mechanical Engineering from the University of Michigan and a Masters of Science in Engineering with a Biomedical concentration from Purdue University.|
Kevin Kucko, MAPT, ATC is a licensed Physical Therapist with over 23 years of experience. His specialty areas include Work-injury Reduction, Outpatient Services Development, and Physical Rehabilitation.
Background Experience - Mr. Kucko began his career as an athletic trainer working with athletes from college through the NFL. He quickly focused on accelerating recovery times while rehabilitating orthopedic injuries. In 1995, he completed his Masters’ degree in Physical Therapy. Since that time, he has served as Department Director at various rehabilitation facilities throughout the east.
Litigation Support - With over 13 years of experience performing Functional Capacity Evaluations, Mr. Kucko has helped hundreds of clients resolve cases with the best possible outcome. He provides services to attorneys representing both Plaintiff and Defense. Kevin Kucko offers meticulous review of medical records in preparation for trial and depositions. For cases where therapy and physical rehabilitation are involved, he sets the foundation by explaining medical conditions and interventions in a clear and concise manner that jurors understand. Mr. Kucko has been deposed and/or testified 14 times since 2010.
Areas of Expertise:
Solution Engineering Group is a multi-disciplinary engineering consulting and technical services company offering engineering investigation and analysis, customized and routine testing, accident investigation and reconstruction, pretrial and courtroom testimony. Their clients include private individuals, insurers, manufacturers, industrial processors, utilities, government, and law enforcement agencies and their representing attorneys. Chief Scientist/Principal of Human Factors and Safety, David G. Curry, PhD, CHFP, CSP, consults on all aspects of Human Factors, Applied Human Performance, Ergonomics, and Safety. He has over 30 years of experience working in accident investigation, product design and development, operational testing and analysis, and both laboratory and field research in the control / display, aviation, and surface vehicle arenas. Dr. Curry holds graduate degrees in Experimental, Human Factors, and Cognitive/ Perceptual Psychology, Industrial Engineering, and Business.
Areas of Particular Expertise:
Dr. Curry has published over 50 technical papers dealing with various issues relating to Applied Human Performance and Accident Investigation. He holds 4 United States patents and has or does serve as a member of national standards-making committees for a variety of organizations (e.g., ANSI, ASTM, and SAE.) Dr. Curry has been honored with receiving the General Motors President’s Council Award and a NASA Center of Excellence Fellowship among others.