banner ad

Visit Spiegel website
 
Deposition Designation Station
 

Industrial and Office Expert Witnesses

Sort Non-Featured Profiles by
< 1 2 3 >
Check for SynapsUs
John Phillips, PE, CFEI
Senior Consulting Engineer
Mail: PO Box 1608
Visit: 7805 Saint Andrews Road
Irmo SC 29063
USA
phone: 888- 827-7823 / 803-732-6600
fax: 803-732-7576
John-Phillips-Crane-Heavy-Equipment-Expert-Photo.jpg

John Phillips, PE, CFEI, Senior Consulting Engineer, has more than 30 years of Crane and Heavy Equipment experience and more than 20 years of experience in forensic engineering. In addition to holding a Bachelor of Science degree in Mechanical Engineering from the University of South Carolina, Mr. Phillips is a Licensed Professional Engineer in South Carolina, North Carolina, Georgia, Louisiana, Ohio and Minnesota. He is NCEES registered both as a model engineer and with The United States Council for International Engineering Practice. During his career, Mr. Phillips has designed crane systems, supervised installation, tested and certified lifting equipment even serving as a project engineer for maintenance and certification of nuclear weapon lifting and handling systems. His extensive experience helps him determine the cause and scope of damage for crane, hoist, and other lift equipment incidents. In addition, he’s a certified Fire and Explosion Investigator and a certified Fire Investigator Instructor by the National Association of Fire Investigators. 

Mr. Phillips is adept at determining the origin, cause, and scope of damage for equipment and structural fires. He also evaluates consumer and industrial equipment for product defects, guarding, and safety issues. He has testified in depositions and trials in state and federal court. Mr. Phillips is a member of the International Code Council (ICC), American Society of Materials (ASM) and the American Society of Testing and Materials (ASTM), as well as a voting member of the ASTM Performance of Buildings, Forensic Sciences, Forensic Engineering, and Ships & Marine committees. 

Areas of Expertise:

  • Cranes and Heavy Machinery
  • Hoist and Lifts
  • Crane / Heavy Equipment Failure Analysis
  • Fires and Explosions
  • Industrial Accident Reconstruction
  • Machinery Damage Assessment
Check for SynapsUs
Jennifer Morningstar, BSChE, PE, CFEI
Chemical Engineer
Mail: PO Box 1608
Visit: 7805 Saint Andrews Road
Irmo SC 29063
USA
phone: 888- 827-7823 / 803-732-6600
fax: 803-732-7576
Jennifer-Morningstar-Chemical-Release-Expert-Photo.jpg

Jennifer Morningstar, PE, CFEI, is a licensed professional engineer in South Carolina, North Carolina, Georgia, Iowa and West Virginia, and an NCEES Model Law Engineer. Ms. Morningstar is a member of the National Association of Fire Investigators (NAFI) and the American Institute of Chemical Engineers (AIChE). She holds a Bachelor of Science Degree in Chemical Engineering from Virginia Polytechnic Institute and State University, as well as a Masters of Business Administration from the University of South Carolina. Background Experience - Ms. Morningstar has 19 years of industrial experience. She spent 16 years working at a polyethylene terephthalate (PET) manufacturer gaining familiarity with all the unit operations. Her experience includes distributed control systems (DCS) and programmable logic controllers (PLC). She is an OSHA-trained Process Hazard Analysis study leader and completed Root Cause Failure Analysis training to become an Incident Investigator. Ms. Morningstar authored Lockout / Tagout Procedures and Confined Space Entry Procedures. She also managed capital expansion projects in excess of $1M and then spent 3 years as an energy management consultant in a variety of industries including mineral extraction, pulp & paper, animal harvesting & packaging (including rendering) and grain milling. Ms. Morningstar worked with both natural gas and coal-fired boilers producing saturated steam and super-heated steam for cogeneration. Other processes in her expertise include air compressors, cooling towers, chillers, multi-stage ammonia-based refrigeration systems, waste water treatment and biogas production. Areas of Expertise:

  • Chemical Release and Exposure
  • Environmental Regulatory Compliance
  • OSHA Process Safety Management
  • Industrial Accident Investigation
  • Fires and Explosions
  • Confined Space Entry
  • Lockout / Tagout
  • Scope of Damage / Cost to Repair
6/27/2018 · Corrosion
When thinking about the safe operation of boilers (and don't we all?), several systems can readily be named; flame control, fuel/air ratio; steam pressure control, levels in the vessel, etc. What about the water? It seems so passive, as long as there is enough for level control, what's the big deal? Well, it turns out, that as the steam produced by a boiler is used in the process, the condensate from that steam is returned to the boiler as feedwater. However, since 100% of the condensate is not returned, whatever solids had been in that water before it evaporated to form steam are left in the remaining water. Fresh feedwater is added to maintain levels, but even fresh water contains some dissolved solids. So over time, the water in the boiler system gets saturated with all sorts of dissolved minerals.

Check for SynapsUs
John Holecek, MSME, PE, CSE, CFEI
Senior Consulting Engineer
Mail: PO Box 1608
Visit: 7805 Saint Andrews Road
Irmo SC 29063
USA
phone: 888- 827-7823 / 803-732-6600
fax: 803-732-7576
John-Holecek-Industrial-Product-Design-Expert-Photo.jpg

John Holecek, MSME, PE, CSE, CFEI, Senior Consulting Engineer, is a licensed professional engineer in 8 states and has both a Bachelor of Science in Mechanical Engineering and Master of Science in Mechanical Engineering from the University of South Carolina. Mr. Holecek has passed the professional engineering exam in both Mechanical and Controls Engineering. A NAFI Certified Fire and Explosion Investigator, he has more than 22 years of experience in the design of industrial, commercial and consumer products. These products include industrial ovens, paint spray systems, HVAC systems, conveyors, and gas appliances including commercial cooking equipment and gas grills. Mr. Holecek's design experience includes the control systems for these products as well as the normal safeguarding provisions applied to these products. Additionally, he has supervised manufacturing operations and managed outside contractors in site safety requirements and the installation of industrial process equipment. By virtue of his experience, he is well versed in federal and state worker safety regulations. 

Areas of Expertise:

  • Electrical and Mechanical Control Systems
  • Fires and Explosions
  • Gas Fired Equipment and Appliances
  • ICC, NFPA, OSHA Codes and Standards
  • Industrial Processes and Operations
  • Safety Regulations
Check for SynapsUs
Roger Davis, PE, CFEI
Senior Consulting Engineer
Mail: PO Box 1608
Visit: 7805 Saint Andrews Road
Irmo SC 29063
USA
phone: 888- 827-7823 / 803-732-6600
fax: 803-732-7576
Roger-Davis-Mechanical-Engineering-Expert-Photo.jpg
Roger Davis, PE, CFEI, Senior Consulting Engineer, is a Licensed Professional Engineer in South Carolina, North Carolina, Alabama, Georgia, and Mississippi. Mr. Davis holds a Bachelor of Science in Mechanical Engineering and a Master of Business Administration from the University of South Carolina. He also has a certificate in Crane Safety from the Georgia Institute of Technology, Distance Learning and Professional Education Center as well as certificates in Fire and Explosion Investigation and Vehicle Fire Investigation.

Mr. Davis is experienced with municipal water, sanitary sewer, and storm water system design, construction, and operations. His expertise also includes property damage and personal injury investigations involving municipal utilities. Mr. Davis is an accomplished gas and diesel engine mechanic and has more than 30 years of experience with hydraulic plumbing and piping issues. He gained practical experience in hydraulics, fluid flow, tanks, and material handling with the South Carolina Department of Health and Environmental Control (DHEC) and Laidlaw Environmental Services, Inc., the largest hazardous and industrial waste firm in North America. He also gained experience in industrial operations as a Manufacturing Engineer.

Roger Davis has investigated claims and injuries ranging from pressure piping system failures and material and personnel handling equipment to large engine failures and fires involving machinery, generators and vehicles.

Areas of Expertise:
  • Aerial Lifts
  • Failure Analysis
  • Industrial and Accident Reconstruction
  • Machine Safeguarding
  • Products Liability Vehicle
  • Mechanical Failure
  • Water and Sewer Systems
  • Check for SynapsUs
    Matthew I. Stein, PE
    Principal
    10591 Belford Place
    Truckee CA 96161
    USA
    phone: 530-587-7618
    Matthew-Stein-Product-Design-Expert-Photo.jpg
    Matthew I. Stein, PE, principal of Stein Design, has 12 patents to his name, 30+ years of Mechanical Engineering experience specializing in Product Design & Development, and 10+ years of Expert Witness experience with Patent Litigation and Product Liability. Multiple Injury cases relating to drinking fountains or involving the use of Safety Showers/Eyewashes. He has designed highly successful products for industry leaders such as Hewlett Packard, Seagate, IGT, Duraflame, Plantronics, and Haws.

    Litigation Support - Mr. Stein’s background as a National Merit Scholar, MIT graduate, and bestselling author, combined with his extensive media experience on television, radio and in public speaking engagements, make him a formidable expert witness who is not only technically savvy but also presents exceptionally well in front of judge and jury.

    Most cases settled out of court, but in one patent infringement case where Stein was the key expert witness for plaintiff, the jury awarded an 8 figure judgment, and in a recent liability case where Stein testified on behalf of plaintiff, the jury awarded $1.8 Million. As a former world class rock climber, and licensed general contractor, he can also offer testimonial on climbing accidents and job site safety.

    Expert Witness Experience:
    • 21 cases total (15 patent related, 2 related to trade secrets, and 4 related to product liability)
    • Authored approximately 34 expert reports
    • Provided deposition on 12 different occasions
    • Provided expert witness court testimonial on multiple days for each of 3 jury trials
    Areas of Expertise:
    • Patent Infringement and/or Invalidity
    • Consumer Product Design & Liability
    • Cash Machines & Paper/Membrane Handling Devices
    • Telephone Head Sets & Small Scale Sonar Devices
    • Water Filtration, Drinking Fountains, & Misc Plumbing Products
    • Safety Showers & Eyewash Equipment
    • ANSI/ISEA/OSHA for Emergency Eyewash & Shower Equipment
    • Plumbing Fixtures & Valves
    • Medical Filters
    • Photovoltaic Panels
    • Plastic Part Design & Application
    View Matthew Stein's Consulting Profile.
    Matthew Stein, PE
    Disasters often strike without warning and leave a trail of destruction in their wake. Yet armed with the right tools and information, survivors can fend for themselves and get through even the toughest circumstances. This book provides a thorough, practical guide for how to prepare for and react in many of life's most unpredictable scenarios.
    Matthew Stein, PE
    This book, comprehensive primer on sustainable living skills—from food and water to shelter and energy to first-aid and crisis-management skills—prepares you to embark on the path toward sustainability. But unlike any other book, Stein not only shows you how to live “green” in seemingly stable times, but to live in the face of potential disasters, lasting days or years, coming in the form of social upheaval, economic meltdown, or environmental catastrophe.
    Check for SynapsUs
    Michael C. Wright, PE, CSP, CPE
    President
    9363 Detrick Jordan Pike
    New Carlisle OH 45344-9140
    USA
    phone: 937-964-1900
    fax: 937-964-8457
    michael_wright_logo.jpg
    Michael WrightMichael C. Wright, PE, CSP, CPE is a Professional Engineer with over 35 years of academic, practical, and specialized knowledge of Engineering, Construction, Safety, Maintenance, Demolition and Training in general industry and construction activities. Mr. Wright's expertise is a definite plus in providing clients with leading edge information and insight. A licensed and practicing engineer, he rounds out his knowledge as a Certified Safety Professional (CSP) and Certified Plant Engineer to provide an insightful and accurate understanding of the issues involved in a case.

    Mr. Wright has completed over 600 hours of specialized safety training, serves on ANSI and ASTM Standards committees and provides a thorough knowledge of OSHA Regulations, Directives and Letters of Interpretation. A recognized author, presenter, and trainer, Mr. Wright communicates the issues clearly for all to understand. His expert witness experience is a balanced blend of defense, plaintiff and OSHA Solicitor cases. Mr. Wright is licensed in 46 states.

    Areas of Expertise:
  • Safety Programs
  • Construction
  • Product Liability
  • Fall Protection Programs
  • Suspended Loads
  • Contractors Formwork
  • Leading Edge Work Activities
  • Machine Guarding Safety
  • Concrete, Wood, Steel
  • Ladder Safety
  • Aerial & Scissor Lifts
  • Anchorage Points - Fall Arrest Programs
  • Bleachers
  • Scaffolding
  • Multi-Employer
  • Concrete Formwork
  • Construction & Demolition
  • Roofing
  • Crane Design & Inspection
  • Training Safety Programs (Customized Training Manuals)
  • View Mr. Wright's Curriculum Vitae
    1/27/2011 · Construction
    The traditional methodology for addressing safety for facilities, machines or products is for owners, architects, engineers, consultants, contractors and vendors to complete the design, engineering, construction or fabrication of a project based on past knowledge, experience and training.

    Check for SynapsUs
    Mark E. Briggs, CSP, ARM
    1314 Theodore Drive
    Champaign IL 61821
    USA
    phone: 217-840-0235
    Safety-Management-Resources-Corporation-Logo.jpg
    Mark Briggs Safety Risk Management Expert PhotoMark E. Briggs is a Certified Safety Professional (CSP) with over thirty years of success as a risk management and safety professional. Mr. Briggs has served in the commercial insurance industry, as the Risk Manager and Chief Risk Officer for two Level 1 Research Universities, and is a co-founder of Safety Management Resources Corporation (SMRC). SMRC has provided continuing support to clients in the construction, manufacturing, education, and service industries for over twenty years.

    Mr. Briggs works successfully with organizations to develop and implement comprehensive safety and risk management initiatives designed to ensure conformance with industry best practices, relevant consensus standards, and governmental regulations. These efforts integrate corporate values into the organizational culture at all levels, increasing operational effectiveness, eliminating employee injuries and property losses, and maximizing the protection of corporate assets and the reputation of the enterprise.

    Mr. Briggs serves as an adjunct faculty member in Illinois State University’s safety degree program, while also acting as the chair of the department’s advisory board. He is engaged with numerous national panels, boards, and task forces sponsored by the U.S. Department of Homeland Security, the Federal Bureau of Investigations, the Department of Justice, the Department of Education, and others. He has also supported the U.S. Olympic Committee in a variety of functions directly related to safety and risk management.

    Litigation Support - Mark Briggs provides expert witness and litigation support services for both plaintiff and defense matters, drawing on his extensive professional experience, formal education, and continuing studies. He brings to each case his first-hand knowledge of industry customs and practices, a deep understanding of relevant consensus standards, and significant experience in the interpretation and application of government regulations. Mark’s background includes case review, investigation, development of detailed reports, and experience providing testimony in Circuit, State, and Federal Courts throughout the country.

    Areas of Expertise:
  • Risk Assessments and Safety Audits
  • Construction Safety and Regulatory Compliance
  • Industrial Safety and Regulatory Compliance
  • Accident and Incident Investigation
  • Confined Space Entry Operations
  • Fall Protection Systems and Solutions
  • Ladder and Scaffold Safety
  • Cranes, Hoists, and Rigging Safety
  • Excavation and Trenching Operations
  • Machinery and Equipment Safety
  • Occupational Health & Safety / OSHA Compliance
  • Recreational Facilities & Activities Safety
  • Premises Liability
  • K-12 and Higher Education Operations, Management & Facility Safety
  • Slip, Trip & Fall Prevention
  • Enterprise Risk Management
  • Business Continuity and Emergency Management
  • Worker's Compensation Insurance
  • View Mark E. Briggs' Consulting Profile.
    Check for SynapsUs
    Greg Gerganoff, CSP, Esq.
    Certified Safety Professional

    Denver, CO
    All States USA
    phone: 303-330-4616
    Rocky-Mountain-Safety-Consulting-Logo.jpg
    Greg Gerganoff OSHA Safety Expert PhotoGreg Gerganoff, ASP, CSP, Esq., is an OSHA / MSHA Safety field and compliance expert with experience in the heavy construction, manufacturing, light rail construction, power plant outages, public schools, oil and gas, mining, pipeline, and trenching and excavation industries.

    As OSHA and MSHA are not mere “guidelines to safety” but federal laws enforceable in administrate hearings and federal courts, Mr. Gerganoff's 12 years of experience as a Licensed Attorney, and additional 17 years as a safety professional (CSP), make him uniquely qualified to research and interpret OSHA regulatory laws (29 CFR 1910 & 1926) and MSHA (30 CFR Part 46). He maintains his license to practice law in the state of Colorado.

    Litigation Support - Understanding the role of case assessment and the value of discovery, Mr. Gerganoff's field safety expertise and legal experience can assist legal counsel at any stage of a safety related case or claim. His services are available to counsel looking to a safety professional as a subject matter expert expecting solid, well researched, sited, and substantiated opinions. No advocacy, just plain, unbiased, well-reasoned and supported opinions. Mr. Gerganoff is retained by attorneys for both Plaintiff and Defendant.

    Safety Training includes but not limited to:
    • PEC SafeLand Core and Basic
    • OSHA 10 & 30 Hour Outreach Trainer Gen Industry
    • H2S Training (in accord with ANSI Z390.1-2006)
    • MSHA New Miner (Surface Metal and Nonmetal)
    • Aerial / Man Lift Operator Training
    • Power Tool Safety and Inspection
  • Hazard Communication
  • Lockout / Tagout
  • Confined Space
  • Trench and Excavation
  • Fork Lift Operator Training / Lifting
  • Fall Protection
  • View Greg Gerganoff's Consulting Profile.
    5/16/2018 · Expert Witnessing
    Lawyers and courts turn to expert witnesses to provide triers of fact with explanations of aspects of a case that are not commonly known. It is the subject matter expert's education, experience, and skill in a particular area that will help the triers of fact to reach a well-informed conclusion/decision. Examples of expert witnesses include medical doctors, accountants, engineers, DNA scientists, and more. Lawyers (and the courts) will employ an expert witness to shed more light upon factual issues for the purpose of discerning the truth. In short, expert witnesses educate, clarify, and explain a subject that is not common knowledge for most people.

    10/17/2017 · Expert Witnessing
    The employ of expert witnesses in litigation is typically undertaken to help the decider of fact (judge or jury) decipher an area of specialized knowledge which is key to the case. The expert report serves the primary purpose of "educating" deciders of fact on topics not commonly known to the general public. However, a noncomplying expert report can wreak havoc on a case, increase costs or worse, have the expert's testimony precluded in whole or part from use at trial. This of course is contrary to the purpose of retaining an expert in the first place. Understanding the parameters of compliance (C.R.C.P. 26 (a) (2) (B) (I)) and how sanctions for non-compliance (C.R.C.P. 37 (c) (1)) may be applied is important not only for legal counsel but the expert as well under the 2015 rule updates and the recent Colorado Supreme Court case, Catholic Health Initiatives Colorado v. Earl Swensson Associates, Inc.

    10/26/2016 · Construction
    During a recent conversation with a friend who had purchased a small construction company he mentioned in passing that one of his employees had injured his ankle on the job but didn't report it to his work comp carrier as it was a minor incident, no days off work, didn't want his rates to go up, why bother. All is good. Right?

    8/18/2016 · OSHA
    Electricity is a vital source of energy in our daily lives. It powers tools, provides light and heat. Our working lives are much improved and efficiency greatly increased thanks to electricity. But what about those situations where power from the grid is unavailable. Well, portable generators are an excellent tool for such a scenario.

    6/24/2016 · OSHA
    Safety culture is a term frequently bandied about in today's business world and sounds as trendy as "mission statements" were years ago. (Let's not forget "best in class". First time I heard this at a company meeting I looked around to make sure I hadn't mistakenly wandered into a dog show. Really?)

    Use fall protection; Use trench boxes when excavating; Lock out Tag Out any time repair or maintenance of equipment involving stored energy is performed; Slips, Trips and Falls are one of the most expensive types of injury. For my sixteen years in safety these safety hazards were always in the forefront of safety concerns for businesses and safety professionals. Guess what? Work related road way crashes is the number one serious/fatal injury cause for U.S. workers. OSHA recognizes this. CDC/NIOSH has generated a white paper studying this fact. Who knew? So here is some info on this number one safety hazard in the US work place.

    4/11/2016 · OSHA
    In the safety world hazard recognition plays a vital role in keeping your people safe from unsafe behaviors and/or conditions. Some hazards are easily recognized, for example an employee climbing up a 20 foot ladder with tools held in both hands. (This is a fall hazard by the way.) Common sense right? The safety guy who taught me safety had a great response to this attitude, "Few people have any sense (read knowledge) in common (read shared alike)". So while some safety hazards are immediately recognizable others require training to spot and avoid. Training is a key method in avoiding the "Ostrich Zone". One such hazard is Hydrogen Sulfide. You don't want to bury your head facing this hazard. (Won't do much good anyway, Hydrogen Sulfide is heavier then air!)

    3/7/2016 · OSHA
    "If you don't know where you are going, you will probably end up somewhere else.", so said Laurence J. Peter, a professor at the University of Southern California whose works touched the business world. (He is well known for the "Peter Principal".) Peter's above quote essentially points out that action lacking a clear objective will likely lead to unwanted or unintended consequences.

    2/19/2016 · OSHA
    Hazard recognition plays a vital role in keeping employees safe. Some hazards are easily recognized, for example an employee climbing up a 20-ft ladder while holding tools in both hands is an obvious fall hazard. While some safety hazards are immediately recognizable, others require training to spot and avoid. One such hazard is hydrogen sulfide (H2S). Training is a key method to avoid the "ostrich zone." You do not want to bury your head when facing this hazard.

    1/29/2016 · OSHA
    When personal injury events occur legal negligence actions may arise. Common law negligence is established by plaintiff showing defendant owed plaintiff a legal duty, to conform to a standard of care, defendant breached that duty, plaintiff suffered injury and there is a causal relationship between the breach and injury. FN 1 But what sources of standard of care proofs are available? How does a litigant go about proving standard of care?

    Check for SynapsUs
    Dr. Robert N. Anderson, PhD, PE
    President
    27820 Saddle Court
    Los Altos Hills CA 94022
    USA
    phone: 650-949-1092
    fax: 650-949-5641
    Robert N. Anderson, PhD, PE, has more than 35 years of experience in Forensic Materials and Metallurgical Consulting specializing in Corrosion and Thermodynamics, Failure Analysis, Engineering Design, and Accident Analysis. Dr. Anderson is an Emeritus Professor in Materials Engineering who offers Expert Witness services to legal firms representing both plaintiff and defendant. A court appointed expert, Dr. Anderson is available for civil and criminal forensic metallurgical cases. He has extensive deposition and courtroom experience having been retained over 50 times in the last 5 years.

    Areas of Expertise:
    • Metallurgy
    • Materials
    • Failure Analysis
    • Accident Analysis
    • Thermodynamics
    • Corrosion
    • Design Failures
    • Asbestos
    • Industrial Failures
    • Welds
  • Medical Device Failures
  • Electrical Fire Source
  • Firearms
  • Ballistics
  • Composites
  • Polymers
  • Wood
  • Ceramics
  • Building Materials
  • Pipes
  • Memberships & Affiliations:
    • American Academy of Forensic Sciences, Fellow/Past Director
    • National Academy of Forensic Engineers, Fellow/Past President
    • International Board of Forensic Engineering Sciences, Diplomate, Past President
    View Consulting Profile.
    Check for SynapsUs
    R. Kevin Smith, P.E.
    President, R. K. Smith Engineering
    1539 Chalone Ct.
    Crown Point IN 46307
    USA
    phone: 219-226-9510 (Office)708-790-1938 (Cell)
    Kevin-Smith-Forensic-Engineering-Safety-Expert-Photo.jpg
    R. Kevin Smith PE, BSME, MMAE, has been a specialist in Engineering Forensic Safety and Design for 35 years. He has consulted on over a 1,000 matters nationwide.

    Mr. Smith is a registered professional engineer and holds a BSME and MMAE from the Illinois Institute of Technology in Chicago. He specializes in Material Handling Equipment Safety, including lift trucks, dock safety, truck loading, conveyors, and aerial work platform safety.

    Mr. has been actively involved as a member of the committee that writes the Safety Standard for Low Lift and High Lift Trucks (ASME/ANSI B56.1) for over 30 years. He also serves on the B56.6 committee (rough terrain lift trucks) and the ANSI A92.5 and A92.6 subcommittees (self-propelled elevating work platforms).

    Litigation Support - Mr. Smith formerly worked for Triodyne, Inc. for over 15 years as a forensic engineer/principal engineer. As President of R. K. Smith Engineering Inc., he currently has a laboratory for examination and testing, and owns or has access to varied testing equipment and tools.

    Kevin Smith has testified at depositions and trials on several hundred matters. He has performed hundreds of investigations into product failures involving injury and property damage, and has reconstructed numerous accidents. His expertise is available to counsel representing both Plaintiff and Defendant. Mr. Smith also is on the Adjunct Math faculty at Prairie State College.

    Areas of Expertise:
    • Forklift Trucks
    • Aerial Work Platform Lifts
    • Product Testing
    • Material Handling / Lifting / Rigging Equipment
    • Accident Reconstruction
    • Machine Guarding
    • Safeguarding
    • Warnings
  • Agricultural and Construction Equipment
  • Skid Steer Loaders
  • Stability Testing
  • Loading Dock Safety
  • Consumer Products / Testing
  • OSHA Citations
  • Codes & Standards
  • Standard of Care in Design
  • View R. Kevin Smith's Consulting Profile.
    Check for SynapsUs
    Dr. J.P Purswell, PhD, PE, CPE
    Ergonomics & Safety Expert
    2035 Mulligan Drive
    Colorado Springs CO 80920
    USA
    phone: 719-330-0126
    fax: 719-265-6905
    Jerry-P-Purswell-photo.jpg
    Dr. J. P. Purswell, PhD, PE, CPE has extensive experience in Human Factors, Ergonomics and Safety Engineering. He holds a doctorate in Industrial & Systems Engineering from Virginia Tech. A member of the Human Factors and Ergonomics Society and the American Industrial Hygiene Association, Dr. Purswell served as the past Chair of the Industrial Engineers PE exam from 2005 to 2009. He continues to serve on the committee which is responsible for the preparation of the national professional engineering examination in industrial engineering.

    Dr. Purswell is the author of more than 20 publications and presentations on Product Safety, Occupational Safety, Printed Warnings, and Auditory Warnings. Examples of products addressed include silica, asbestos, cleaning chemicals, gasoline containers, and recreational equipment. Dr. Purswell maintains NIST-calibrated equipment for the measurement of light, sound, force, and whole-body and hand-arm vibration in addition to standard photo and video equipment.

    Dr. Purswell has been an Expert Witness in the legal industry since 1997. He has been qualified as an expert in state and federal courts across the nation in safety engineering, including safety analysis techniques such as Fault Tree Analysis and FMEA as well as product warnings / instructions and OSHA compliance issues. Dr. Purswell's services include site inspections, document review, drafting Rule 26-compliant reports, deposition, and trial testimony. He has been retained by attorneys for both Plaintiff (40%) and Defense (60%) more than 100 times, has been deposed approximately 50 times, and has testified at trial over 20 times.

    Areas of Expertise:
    • Warning and Safety Instructions
    • OSHA Compliance
    • Chemical Accident Prevention
    • Product Safety
    • Lockout / Tagout & Machine Guarding
    • Trucks and Forklift Accidents
  • Power Tools Safety
  • Hazard Communication - Audible Alarms
  • Employer Safety Training and Supervision
  • Perception / Reaction Time
  • Ergonomic Work Practices
  • Working and Walking Surfaces - Slip, Trip and Fall
  • View Dr. Purswell's Consulting Profile.
    10/10/2013 · Ergonomics
    In 2005 a summary of "General Duty Clause" citations issued for ergonomic hazards was published (Purswell & Purswell, 2005). That summary showed that the primary area of ergonomics citation activity under the "General Duty Clause" (paragraph (5)(a)(1) of the OSHAct of 1970) by OSHA to that point had been concentrated in nursing homes, peaking in 2002 and 2003.

    The purpose of the current study was to update and expand upon an earlier study performed to review and categorize OSHA accident investigation records for pedestrian-backing vehicle accidents according to whether the backing vehicle had a backup alarm and whether the alarm was installed and functioning as intended. The current study includes an analysis of additional records as well as the business type (SIC code) of the employer.

    Check for SynapsUs
    Homer R. Peterson, II, PE, CSP
    10914 Pifer Way
    Houston TX 77024
    USA
    phone: 832-740-4596
    Homer-Peterson-Occupational-Health-Safety-Expert-Photo.jpg
    Homer R. Peterson II, PE, CSP, has over 40 years of Construction and Safety experience (17 union, 23 non-union) in various positions such as president, senior vice president, vice president, project manager, and timekeeper.

    Mr. Peterson's responsibilities have included estimating, sales, project management, scheduling, expediting, quality, troubleshooting, and administration, plus 20 years in charge of safety and risk management. Work overseen has included over 350 projects in 21 states and territories of the United States, including airports, bridges, casinos, convention centers, convocation centers, distribution centers, hospitals, hotels, manufacturing facilities, office buildings, paper mills, pharmaceutical plants, power plants, prisons, refineries, schools, stores, shopping malls, sports arenas, steel mills, and warehouses.

    Litigation Support - Mr. Peterson provides consulting services to attorneys, insurance companies, and businesses preparing for litigation arising from either 1) construction disputes or 2) safety issues that have resulted in worker injury or death. His services are offered as a subject matter expert, expert witness, and safety consultant. Mr. Peterson also serves as an arbitrator through the American Arbitration Association (AAA).

    Areas of Expertise:
    • Safety
    • Falls from Elevation
    • Fall Protection
    • Negligence
    • Occupational Health / Safety Management Systems
    • Personal Injury
    • Safety Standards of Care
  • Wrongful Death Construction
  • Construction Claims
  • Construction Disputes
  • High-rise construction
  • OSHA Matters
  • Precast Erection
  • Steel Erection
  • View Homer Peterson's Consulting Profile.
    Check for SynapsUs
    Mari S. Truman, PE
    Principal Engineer
    221 N. Union St.
    Waraw IN 46580
    USA
    phone: 574-265-1726
    fax: 866-470-6125
    Mari-Truman-Orthopedic-Biomechanics-Expert-Photo.jpg
    Mari S. Truman, PE, has more than 37 years of experience in Orthopedic Product Design and Development. As Principal Engineer with her company, Orthobiomech, LLC, she acts as an R&D design and development consultant to the orthopaedic industry and an injury biomechanics and medical device forensic expert.

    Ms. Truman's design experience includes implants and instrumentation systems used to repair fractured bones, torn ligaments and/or to reconstruct spine, knee, wrist, hip, ankle, elbow, thumb based cmc, and other finger and toe joints for many of the USA based orthopaedic conglomerates and a few Asian, Australian and European firms.

    Having designed and developed implants and instruments used for both human joint reconstruction and skeletal trauma repair, Ms. Truman is named on 12 Orthopaedic Patents and frequently gives talks on implant design and injury biomechanics on topics such as: knee and thumb-based joint surfaces and kinematics, joint design, rapid prototyping, medical device design control, and injury biomechanics.

    Litigation Support - Ms. Truman has been providing Forensic Impact and Injury Biomechanics and Orthopedic Biomechanics to the legal industry for over 15 years. She draws on her strong knowledge of FDA and ISO EN13485 compliant design control processes, failure modes and effects analysis, clinically relevant tissue loading, and design safety assurance, including device performance requirements and warnings, during her medical device litigation reviews. Ms. Truman has a strong knowledge of the production and quality assurance processes used in the manufacture, cleaning, and sterilization of medical devices and the effects of such processes on product performance.

    Analysis of Traumatic Injuries Related To:
    • Falls and Fall Recovery
    • Vehicular Collisions
    • Assaults and Fights
    • Projectile Impacts
    • Occupation or Workplace
  • Failed Medical Implants
  • Assistive Devices
  • Orthotics
  • Consumer Products
  • Sports and Recreation, Occupational Overuse / Injury
  • View OrthoBioMech LLC's Consulting Profile.
    Check for SynapsUs
    C. Kendall Clarke, MS, PhD, PE
    1146A LeRoy Stevens Rd.
    Mobile AL 36695
    USA
    phone: 251-639-3433
    Metallurgical-Consulting-Logo.jpg
    C Kendall Clarke Expert PhotoC. Kendall Clarke, MS, PhD, PE, has 40 over years of experience as a degreed and registered professional engineer in the field of Metallurgy and Material Science. He offers expertise specifically in the areas of metallurgy, fracture mechanics, corrosion, and welding.

    Dr. Clarke has expertise estimating failure stresses from fractures to produce an engineering root cause failure analysis. Examples include a cruise ship breakaway, exhaust stack cracking, aircraft fuselage fatigue, and pressure vessel explosions.

    Dr. Clarke has industrial experience in ship building, chemical plants, paper mills, and manufacturing. He is published in the Journal of Failure Analysis and Prevention, among others. He is an active member in the Alabama and National Societies for Professional Engineers, the National Association Corrosion Engineers, and American Society for Testing and Materials.

    Litigation Support - Retained over 400 times, Dr. Clarke is a testifying expert with experience in writing thorough reports and defending them in deposition and trial. He is qualified to testify in state and federal courts. Dr. Clarke's goal is to provide solid engineering testimony in deposition thus to help in case settlement. He works with attorneys to educate them on the technical issues and to help produce mediation and trial presentations of complex issues on a layman's level for the jury.

    General Areas of Litigation Case Experience (multiple cases):
    • Accident Investigation & Failure Analysis
    • Axle Failures / Fractures
    • Corrosion
    • Fasteners (Rivets, Bolts, Blind Fasteners)
    • Fracture Mechanics
    • Industrial Accident Investigation & Reconstruction
    • Metallurgical Engineering
    • Metals – Strength & Fatigue
    • Product Liability
  • Stress Fractures
  • Welding / Spot Weld Failures
  • Wheel Failure
  • Pressure Vessel Failure Reconstructions
  • Truck Under Ride Bar Failures
  • Tree Stands for Hunting
  • Heat Exchanger Failures
  • Maritime Components
  • Equipment Fires
  • View Dr. Clarke's Consulting Profile.
    Check for SynapsUs
    Gary Hutter, PhD, PE, CSP
    Dr.
    4228 Commercial Way
    Glenview IL 60025
    USA
    phone: 847-297-6538
    fax: 847-297-6615
    gary-hutter-safety-engineering-expert-photo.jpg
    Gary Hutter, PhD, PE, CSP, is affiliated with Meridian Engineering & Technology, Inc., providing safety /engineering services in safety-forensic matters. Dr. Hutter has over 45 years of education, experience, and training in: Mechanical, Environmental, and Safety Engineering, and Human Factors/Biomechanics.

    He has taught at the Illinois Institute of Technology (IIT) teaching courses in: “Industrial Health & Safety”, “OSHA & EPA Compliance”, and “Safety Risk Assessment”. He is a Registered Professional Engineer (PE), a Certified Safety Professional (CSP), and safety committee member for the: National Safety Council, ASTM, Fabricators & Manufacturers Ass’n., and ANSI. Dr. Hutter is chairman of the NSC's committee for machinery safety. He is an author/reviewer/contributor to OSHA, ANSI, and NSC publications on: safety, interlocks, used equipment safety, confined space, consumer products, and Lockout & Tagout. He is a contributing author in the text book “Carbon Monoxide Poisoning”.

    Prior safety-related professional employment has included: the E.P.A., Ford Motor Company, UOP, and Clark Equipment Co.

    Litigation Support - Dr. Hutter has provided services for over 30 years as a consultant and as a corporate representative. His provides the technical basis for evaluating liability issues on: equipment failures, patents, consumer products, construction safety, code compliance, and property losses. He often documents equipment performance, performs safety tests/calculations, and researches problems and failures. His is available to attorneys representing both plaintiff and defendant; and on non-litigation matters in accident documentation/evaluation, due diligence in safety, OSHA surveys, and safety risk assessments.

    Areas of Expertise:
    • Safety Engineering / Accident Reconstruction / Construction
    • Mechanical Engineering Issues / Coefficients of Friction (slips)
    • Industrial Hygiene / Environmental Engineering
    • OSHA & Code Compliance (ANSI, ASTM, UL...)
    • Confined Space Entry / Carbon Monoxide Exposures
    • Machinery Safety / Safeguarding / Lockout-Tagout / Interlocks
    • Hot Water / Chemical Burns
    • Chemical Safety / MSDS / Warnings / Exposures / CPS
    • Machine Design for Safety / Steel Mill Safety
    • Human Factors / Biomechanics, Epidemiology of Accidents
    • Written Safety Materials/ Manuals / Warnings
    View Dr. Hutter's Consulting Profile.
    < 1 2 3 >