banner ad

Recreational Vehicles / RV Expert Witnesses

Sort Non-Featured Profiles by
Check for SynapsUs
Murat Okcuoglu
4175 Lago Dr.
Santa Barbara CA 93110
USA
phone: 805-637-5482
Murat-Okcuoglu-Automobile-Accident-Expert-Photo.jpg
Murat Okcuoglu is an Automotive Engineer and Designer with over 30 years of experience. He has worked with most United States and European automotive manufacturers.

Mr. Okcuoglu has invented and developed QuadraDrive, VersaTrak, and various other traction control and all wheel drive systems which went into production on many make and model vehicles including Jeep Grand Cherokee, Ford Mustang Cobra R, Dodge Viper R/T, Buick Rendezvous, Pontiac Aztec, Saturn Vue, Chevrolet Venture, and Oldsmobile Silhouette.

Driving race cars for 40 years, Mr. Okcuoglu has tested and developed vehicles with all major U.S. and most European manufacturers and manufacturers' on proving grounds around the world. He has unparalleled experience on both the hands on and academic aspects of automotive engineering and vehicle systems.

Mr. Okcuoglu has produced several publications and papers and has been awarded 9 U.S. and over 7 foreign Patents. He currently works as an independent consultant, doing research mostly on Vehicle Dynamics and Electronics.

Litigation Support - Murat Okcuoglu provides expert witness services to attorneys representing both plaintiff and defendant. His experience includes approximately 70 depositions and testimonies in Federal and State courts. Mr. Okcuoglu's services include site review, thorough reporting, depositions, and trial testimony as needed.

Areas of Expertise:
  • Automotive Research
  • Automotive Design
  • Automotive Testing
  • Automotive Forensic Analysis
  • Automotive Drivetrains
  • Automotive AWD 4x4 design
  • Automotive Transmission Design
  • Automotive Engine Design
  • Automotive Emission Controls
  • Automotive A/C Design
  • Handling Stability / Skidding
  • Rollover Propensity
  • Electronic Systems & Components (ESC)
  • Autonomus Vehicle Systems
  • Check for SynapsUs
    Dr. A.B. Thakker
    Ph.D., PE, FASM, CMFGE
    2839 Paces Ferry Road
    Overlook II, Suite 1160
    Atlanta GA 30339
    USA
    phone: 800-215-4468 or 404-771-2600
    fax: 770-234-4148
    global_technology_experts_logo.jpg
    Firm Profile: Established in 1996, Global Technology Experts, Inc. (GTE) specializes in providing multi-disciplinary engineering and scientific consulting, product testing, safety and forensic engineering services to manufacturers, defense and plaintiff attorneys, and to the insurance claims industry. Our professional staff includes engineers, scientists, and technical specialists who have years of experience and excel as experts in wide range of disciplines. GTE has investigated more then 350+ failure cases that include: Machinery/Equipment, Slip and Fall, Accident Reconstruction, Vehicle Rollover, Lift trucks, Bicycle, Generator/Battery, Tree stand, Construction Defects, Pump/Boiler/Chiller, Engine/Transmission, Weld joints, Corrosion, Fatigue, Polymers, Ceramics and Composite materials. GTE also specializes in Life assessment and durability analysis of prototype components etc.

    Areas of Expertise:
  • Electrical Failures
  • Motor/Generator Failures
  • Battery Failures
  • Accident Reconstruction
  • Tire Defects
  • Machinery & Equipment Failures
  • Construction Equipment Failure
  • Aircraft Engine/Structural Failure
  • Structural Engineering
  • Mechanical Metallurgy/Materials Failure
  • Fatigue & Corrosion
  • Product Failure Analysis
  • Bicycle, Ladder, Slip/trip & fall
  • Building Construction & Defect Analysis

  • Education: We have highly experienced and qualified staff:
  • PhD, Engineering Science & Materials, Virginia Tech
  • PhD, Electrical Engineering, Georgia Tech
  • PhD, Mechanical Engineering, Auburn University
  • BS, Civil and Construction Engineering, Kansas State University
  • BS, Mechanical Engineering, S.U.N.Y., Buffalo, NY
  • MBA, Technology Management, Florida Institute of Technology

    Certifications:
  • PE – Registered Professional Engineers
  • CMfgE – Certified Manufacture Engineer

    Professional Affiliations:
  • Southern Law Association
  • Atlanta Claims Association
  • American Society of Mechanical Engineers
  • Institute of Electrical and Electronics Engineer
  • American Society of Civil Engineers
  • American Society of Materials
  • American Society of Nondestructive testing
  • American Welding Society
  • American Society of Testing Materials
  • Society of Aerospace, Materials and Process Engineers

    Principals:
  • Dr. Ash Thakker, PhD, PE, FASM,FSME, CMfgE (Structures, Materials, Fatigue, Fracture, Composites, Damage Tolerance)
  • Mr. George Kremer, BSME, AAS (Metallurgy, Corrosion, Coatings and Mechanical Failures)
  • Dr. Nicholas Propes, PhD (Electrical Machinery Failures, Maintenance Systems, Testing and Analysis)
  • Dr. Freeman Rufus, PhD (Battery/Motor/Generator Failure)
  • Dr. Jyoti Ajitsaria, PhD (Mechanical Failures)
  • Mr. Mike Healy, BS (Civil, Construction Engineering, Buildings)
  • Mr. Ralph Cunningham, BS (Physical Testing, Accident Reconstruction)
  • 11/20/2010 · Slip, Trip & Fall
    A "slip and fall" or "trip and fall" is the generic term for an injury which occurs when someone slips, trips or falls as a result of a dangerous or hazardous condition on someone else's property. It includes falls as a result of water, ice or snow, as well as abrupt changes in flooring, poor lighting, or a hidden hazard, such as a gap or hard to see hole in the ground