banner ad

Airbags - Seat Belts Expert Witnesses

Sort Non-Featured Profiles by
< 1 2 >
Check for SynapsUs
44648 Mound Rd.
Suite 174
Sterling Heights MI 48314
USA
phone: 248-408-7981
Douglas-Van-Sweden-Vehicle-Accident-Reconstruction-Expert-Photo.jpg
Douglas J. Van Sweden, PE, is a Mechanical Engineer with over 45 years of experience in the automobile industry, including 20 years with the General Motors Corporation.

Litigation Support - Since 1997, Mr. Van Sweden has been providing insurance companies, legal firms, and manufacturers with the objective, scientific research to clearly define what really happened, for the cost-effective answer. The facilities, equipment, training, and commitment to continuing education allow him to find and assemble the critical missing pieces in Accident Reconstruction cases. He painstakingly reconstructs events so the end picture will be the accurate and defensible answer to what really happened.

Mr. Van Sweden's services are available to attorneys representing plaintiff and defendant and include site review, record review, thorough reports, depositions, and trial testimony as needed.

Vehicle Expertise:
  • Cars
  • Trucks
  • Motorcycles
  • Boats
  • Recreational Vehicles
  • Bicycles
  • Personal Watercraft
  • Non-Transportation - Elevators, Hoists:
    • Vehicle Systems and Structures
    • Vehicle Design
    • Seat Belt and Airbag Restraint Systems
    • Interior Components
    • Fuel Systems
    • Electrical Systems
    • Cooling Systems
    • Exhaust Systems
  • Drive Trains
  • Brakes
  • Suspensions
  • Steering
  • Body
  • Corrosion
  • Crash Testing
  • Fires and Explosion Cause / Origin
  • Check for SynapsUs
    Thomas Lepper
    810 Rose Drive
    Benicia CA 94510
    USA
    phone: 408-691-2779
    fax: 707-751-3833
    Thomas J. Lepper has over sixteen years of experience as a consultant, inspector and tester within the automotive industry. He has more than ten years of experience as a forensic automotive consultant for nationally known insurance companies and law firms. Mr. Lepper is qualified to testify as an Expert Witness in the Superior Court for the State of California.

    Areas of Expertise:
    • Tire and Brake Separations and Failures
    • Theft and Forced Entry Issues
    • Fire Cause and origin
    • Transmissions
    • SDM Interrogation with CDR Tool
    • Steering and Suspension Systems
    • Seat Belt and Airbag Issues
    • Mechanical Defects
    • Throttle / Unwanted Acceleration Issues
    • Wiring and Electrical Issues
    • Racetrack / Racecar Incidents
    Mr. Lepper's forensic, automotive fire, brake and tire expertise has been performed for major nationwide insurance companies, nationally known rental car companies and law firms. Please contact for fee schedules.
    Check for SynapsUs
    Dr. J. Rasty, PE, MBA
    President & CEO
    1500 Broadway, Ste. 503
    Lubbock TX 79401
    USA
    phone: Cell:806-773-7787 or Ofc: 806-368-9811
    fax: 214-614-4955
    rasty_logo2.gif


    Since 1988, Real-World Forensic Engineering, LLC ("RWFE") has provided engineering services to industries and government labs, as well as litigation support to both plaintiff and defense attorneys practicing in many areas.

    RWFE Expertise Includes:

    Components & Machinery
    Metallurgy & Corrosion
    Dynamics of Impact & Collisions
    Friction Analysis / Slips, Trips and Falls
    Intellectual Property & Patent Review
    Accident Reconstruction / Animation
    Computer Aided Design
    Education & Training
    Electrocution & Switch Malfunction
    Grounding & Lightning Protection
    Lightning Impulse Testing
    Products and Premises Liability & Safety
    High-Voltage & Current Power Systems
    Bridge Design and Safety
    Fire & Explosion Cause and Origin
    And Much More...


    At RWFE, we proudly distinguish ourselves by our Four C's:

    CREDENTIALS. COMPETENCE. CREDIBILITY. COMMUNICATION.

    Credentials:B.S., M.S., M.Eng., M.B.A., J.D., and Ph.D. Degreed
    Licensed Professional Engineers in Mechanical, Electrical, and Civil Engineering
    Tenured University Professors and Professionals
    NAFI Certified Fire and Explosion Investigators (CFEI)
    Licensed Master Electricians
    Competence:Over 80 Combined Years of Experience in Engineering R&D, Industry, Academia, Consulting, and Expert Witness Litigation Support
    Over 120 Combined Deposition and Court Testimonies
    Credibility:Internationally Recognized in Our Areas of Expertise
    More Than $19 Million in Peer-reviewed and Funded Research Grants
    Over 200 Combined Scientific Publications and Journal Articles
    Communication:Over 20 Different Undergraduate and Graduate-level University Courses
    Over 30 Invited Short Courses, Talks, and Lectures

    Design Evaluation – Accident Investigation – Intellectual Property
    Failure Analysis – Fire Cause & Origin – Component Testing
    Computer Aided Drafting – Accident Animation
    Expert Witness & Litigation Support

    www.ExpertEngineering.com
    Check for SynapsUs
    Mukul Verma, PhD
    Consultant & Professor of Mechanical Engineering

    USA
    phone: 248-971-0705
    Mukul-Verma-Logo.gif
    Mukul Verma Vehicle Engineering Expert PhotoMukul K. Verma, PhD in Mechanical Engineering and Applied Mechanics, brings more than 35 years of industrial, academic and R&D experience to his consulting practice. This extensive experience includes various engineering and management assignments in the development and testing of new automobiles at a major manufacturer of vehicles. He has led the implementation of technical advances in multiple fields of vehicle design and automotive safety, some examples being in areas such as - performance of airbag systems, pedestrian’s protection, car-to-SUV crashes, telematics for crash notifications, post-crash protection, heavy truck rollovers, motorcycle handling, etc. During period, Dr. Verma was additionally appointed by the automobile manufacturers’ associations and other research organizations to lead an international team of experts which then successfully developed engineering solutions to the urgent problem of safety of occupants in passenger cars when involved in crashes with heavier SUVs or pickup trucks.

    His recent academic experience has been in the field of sustainable transportation and he has taught graduate courses in mechatronics systems in vehicles and intelligent tire-and-vehicle systems.

    Dr. Verma has published more than thirty papers in peer-reviewed journals and at international conferences and has been active in professional organizations as invited speaker, session chairman and organizer. He is well-known for his expertise in Vehicle Engineering and Traffic Safety and his interviews and opinions have appeared in US and in international media on several occasions

    Litigation Support – Dr. Verma’s recent litigation-related work has been in two fields:

    1. Automotive forensics – accident investigation and product liability evaluation of automobiles. His work includes detailed incident analysis, evaluation of the performance of vehicle and airbag systems, preparation of expert reports, depositions and trial testimony.

    2. Intellectual Property – analysis of a patent’s validity and evaluation of infringement claims for complex electromechanical and safety-related components. This includes literature search, prior art, detailed reports on validity & infringement and deposition and trial testimony.

    His clients have included automobile manufacturers, large corporations, private citizens and government entities.

    View Dr. Verma's Consulting Profile.
    Many automobile accidents are complex cases with multiple events during a single accident. The aim of forensic investigations of such (and all other) accidents is to reconstruct the sequence and the severity of events during the accident and then to establish cause and- effect relationships between the injuries (or damages) and the probable factors - vehicle design (e.g. brakes, structure, airbags); vehicle operator (e.g. distracted driver, alcohol impairment, reduced vision); and operating conditions (e.g. fog, failed traffic sign, excessive speed, icy road).

    Hybrid cars have been on US roads for many years, starting with Honda InSight (1999) and Toyota Prius(2000) in mass production.

    In crashes between two automobiles, it is generally assumed that the lighter vehicle will suffer more damage and that its occupants will suffer higher levels of injury.

    This article contains a few of the findings from our recent study of automobile safety in frontal crashes. Parts of the data analyses are presented but details such as the relationship of a particular design feature to the measured injury indicators are highly dependent on specific cases and are available only for individual discussions.

    The New Car Assessment Program (NCAP) conducted by the National Highway Traffic Safety Administration (part of the U.S Department of Transportation) underwent major changes recently. For automobiles designated as model years 2011 and later, the changes involve both what is measured and what is published.

    Over the years, there have been several product liability litigations regarding pedestrians being injured and the front structure designs of the vehicles being alleged as the significant factor.

    The structural behavior of automobile seats and seatbacks is one of the factors often examined in investigating injuries to a vehicle's occupant(s) in crashes.

    Airbags in modern automobiles have been around for many years and their record in improving occupant safety in crashes is generally well accepted. However, many questions still arise regarding their deployment and performance in crashes.

    Check for SynapsUs
    Nik Ellis
    Managing Director
    188 - 200 Pensby Road
    Heswall Wirral CH60 7RJ
    GBR
    phone: 0151-342-9961
    fax: 0151-342-7844
    nik_ellis_logo.gif
    Established in 2000, Laird are an Expert Witness services firm supporting the Legal sector across the UK. They understand the importance of providing an efficient and seamless customer journey and review their processes continually to ensure that they achieve and surpass expectation levels daily.

    With constantly evolving IT systems and exceptional customer service, Laird are leading the way in the Expert Witness sector. You can instruct with the click of a button via their website and will be kept up to date at every stage of your case.

    Laird have three main areas of expertise:

    Automotive Experts
    • Vehicle Damage Reports
    • Low Velocity Impact
    • Diminution in Value
    • Desktop Reports
  • Vehicle Valuation Disputes
  • Accident Reconstruction
  • Pre and Post Repair Inspections
  • Vehicle Data Check
  • Photography Experts
    • Locus Reports
    • Personal Injury Photography Reports
    Language Experts
    • Interpretation
    • Translation
    • Witness Statements
    • Document sign up service
    Check for SynapsUs
    Gary E. Kilpatrick, PE, DFE
    President and Chief Engineering Officer
    3397 Cherrybrook Drive
    Jamestown NC 27282
    USA
    phone: 336-841-6354 (Office) 336-803-1639 (Cell)
    fax: 336-841-6375
    gary_kilpatrick_photo.jpg
    Who is Kilpatrick Forensics?

    Kilpatrick Forensics is a forensic engineering firm that provides forensic engineering services for our legal and insurance clients. Mr. Kilpatrick travels throughout the United States in order to investigate motor vehicle crashes and product defects and failure claims resulting in personal injury or death. Mr. Kilpatrick is a board certified vehicle crash reconstruction engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensic Engineer (DFE). He is also a part-time instructor for Northwestern University through their Center For Public Safety and is a firm believer in continuing education.

    The Mission of Kilpatrick Forensics:

    Mr. Kilpatrick’s mission is to provide to you forensic engineering services that are dedicated to the application of the art, science and methodology of engineering and the scientific method in order to answer questions of fact in the jurisprudence system to assist the trier of fact concerning motor vehicle accidents and motor vehicle product defect and failure claims. Mr. Kilpatrick utilizes his engineering knowledge, skill, experience, training and education to give you an objective professional opinion that is thorough and comprehensive, understandable and timely. He has submitted written expert reports in state and federal court and has given sworn expert testimony under oath during both deposition and trial.

    What services does Kilpatrick Forensics provide? (also see the following pages)
    • At-Scene Investigation and Evidence Mapping
    • Motor Vehicle Crash Reconstruction
    • Vehicle Crash Testing
    • Vehicle Skid Testing
    • Image, Store and Analyze a Vehicle’s Crash Data Report (CDR) stored in the EPROM circuitry of a Vehicle’s Airbag Control Module (ACM)
    • Photogrammetry Studies of Police Photographs
    • Airbag and Seat Belt Inspections
    • School Bus Crash Reconstruction
    • Tractor Trailer/Heavy Trucks Crash Reconstruction
    • Motorcycle Crash Reconstruction
    • ATV and ROHV Crash Reconstruction
    • Computer Based Dynamic Motor Vehicle Crash Simulations Videos
    • Standards of Care for Motor Vehicles
    • SAE Standards
    • National Highway Traffic and Safety Administration (NHTSA) Regulations
    • Federal Motor Vehicle Safety Regulations
    • Product Defect and Failure Analyses
    • Machine Design and Analyses
    • Computer Aided Design (CAD)
    Who are the clients of Kilpatrick Forensics?

    Mr. Kilpatrick works with law firms, public defenders and insurance companies on civil plaintiff, civil defendant, criminal and insurance claimant cases.

    How can you contact Kilpatrick Forensics?

    Mr. Kilpatrick’s corporate office is located in Jamestown North Carolina. Visit our website at www.kilpatrickforensics.com. Please feel free to contact him any time at office at 336-841-6354 or cell phone at 336-803-1639.
    During 1990, the Specialty Vehicle Institute of America (SVIA) with the assistance of the American National Standards Institute (ANSI) published the first standard for ATVs referred to as ANSI/SVIA-1-1990. During 2001, ANSI/SVIA revised this standard referred to as standard ANSI/SVIA 1-2001. The standard was revised again during 2007 and again in 2010 and is referred to as standard ANSI/SVIA 1-2010.

    A Traffic Accident Reconstruction is a process by which an engineer determines from all available information and evidence how and why a traffic accident occurred including but not limited to pre-impact and post impact vehicular velocity vectors, pre-impact and post impact vehicular direction vectors, vehicular change in velocity (Delta-V), momentum vectors, vehicles' point of impact on the roadway, vehicular visibility by a driver, vehicular crash data retrieval reports if assessable, accident factors and causes.

    7/8/2011 · Engineering
    Quality control starts at the point of product conception and is carried all the way through to the final design and manufacture of a product.

    Some motor vehicle accidents take place during the night time hours when natural sun light is not present.

    When we drive our vehicles down the road, we are driving them at a certain velocity and direction. All vehicles have weight and mass to the order of a few hundred pounds for a motorcycle, a few thousand pounds for a large SUV or luxury car or several tons for a tractor-trailer truck. When our vehicles move at speed down the road, they create energy by virtue of their mass and forward velocity

    Check for SynapsUs
    Roy Theophilus Bent, Jr.
    Expert Witness / Auto Appraiser
    104 West Baker Rd.
    Baytown TX 77521
    USA
    phone: 877-845-2368 or 281-424-6466
    Roy-Theophilus-Bent-Auto-Appraisal-Expert-photo.jpg
    Houston Auto Appraisers Auto 
<br/><br/>PhotoRoy Theophilus Bent, Jr. is a well known and respected expert and consultant in the automotive industry. An IACP Certified Auto Appraiser, Expert Witness, and Field Inspector, Mr. Bent is the seated President of the Bureau of Certified Auto Appraisers, a National Professional Appraisal Credentialing Organization that has trained, tested, and certified over 2,400 students under his leadership in the practices of IACP Certified Auto Appraisals and Litigation assistance.

    Mr. Bent holds numerous licenses and credentials as an ASE Certified Mechanic, I-Car Collision Specialist, Licensed Auto Appraiser, Insurance Adjuster, Umpire, Mediator, Arbitrator, Classic Car Judge, and Vintage Car Historian.

    Litigation Support - Mr. Bent is retained by counsel to provide IACP Certified Third Party Appraisals for most auto related lawsuits. He serves law firms whose clients are involved with dissolution, probate, bankruptcy, and diminution of value, and automobile accidents.

    Mr. Bent is a contributing author in several peer reviewed journals in auto accident expert witness related theories, case studies, and reports which are used exclusively by other expert witnesses in the field. His services include deposition, arbitration, mediation, and trial testimony when necessary.

    Areas of Expertise:
  • Diminished Value Appraisals
  • Total Loss Appraisals
  • Corrosion
  • Defective Products
  • Lemon Laws
  • Air Bags
  • Repair Negligence
  • Motor Homes
  • Motorcycles
  • Recalls
  • Seat Belts
  • Auto Accident Reconstruction
  • Automotive Accident Photography
  • Automotive Odometer Tampering
  • Used Car Dealer Fraud
  • Tractor Trailers / Unsafe Loads
  • Classic Cars / Custom Vehicles
  • Commercial Vehicle Accidents
  • Electronic Control Module (ECM)
  • High / Low Speed Accidents
  • Deceptive Trade Practices
  • Ignition Switch Failures
  • Pedestrian / Vehicle Collisions
  • Public Transportation Accidents
  • Recreational Vehicles-RVs
  • Rollover-Roof Crush
  • Run Overs (Pedestrians)
  • Self-Insured / Liability Claims
  • Unibody & Frame Repair
  • Vehicle Fire Cause & Origin (Battery)
  • View Houston Auto Appraisers' Consulting Profile.
    Check for SynapsUs
    Christopher Gayner
    CEO /Senior Engineer
    5482 Wilshire Blvd.,Suite 1592
    Los Angeles CA 90036
    USA
    phone: 888-687-1334
    Christopher Gayner is the CEO of Expert Reconstruction Company and has 30 years of professional experience with over 1000 Traffic Accident cases involving Automobiles, Trucks, Buses, Trains, Motorcycles, Bicycles and Pedestrians. Mr. Gayner has testified over 300 times in trials, depositions, mediations and arbitrations. He is ACTAR certified and a Member of the Society of Accident Reconstructionists and the Society of Automotive Engineers.

    Areas of Specialization:
    • Accident Reconstruction (Manual and Computer-Aided)
    • Human Factors
    • Occupant Dynamics
    • Bio-Mechanics
    • Restraint Systems (Seat Belts & Air Bags)
    • Product Defects
    • Crashworthiness
    • Vehicle & Scene Inspections
    • Accident Scene and Vehicle Crush Damage Assessment
    • Crash Data Retrieval
    • Photographic Documentation and Interpretation
    • Expert Witness Testimony
    • Neutral Expert Mediation Services
    Check for SynapsUs
    J. Marcus Hollis, PhD, PE
    8418 East Bay Blvd.
    Navarre FL 32566
    USA
    phone: 850-292-4780
    J-Marcus-Hollis-Biomechanical-Engineering-Expert-Photo.jpg
    J. Marcus Hollis, PhD, PE, is a Bio-Mechanical Engineer specializing in biomechanics, injury causation, and seat belt effectiveness, and medical device design review.

    Dr. Hollis analyzes how the human body reacts to forces generated from an accident in order to determine if the injuries are consistent with the accident event. Dr. Hollis utilizes a robust 3-dimensional simulation program to determine how an occupant moves in a particular collision, what the occupant collides with, the forces that are generated, and whether seat belt use would have prevented the reported injuries.

    Dr. Hollis is currently an Adjunct Assistant Professor in the Department of Orthopaedic Surgery at the University of South Alabama. Dr. Hollis has earned 8 United States patents in the field of Bio-Mechanics.

    Litigation Support - Dr. Hollis has testified as an expert witness in various cases on behalf of both plaintiffs and defendants. His services include medical record review, written reports, computer animation, computer simulation, deposition, and trial testimony as needed.

    Areas of Expertise:
    • Medical Device Design Review
    • Product Testing
    • Bio-mechanical Analysis of Injury
    • Product Prototype Fabrication
    • Medical Product Design
    • Bio-medical Implant Testing
  • Medical Device Testing
  • Product Liability
  • Sports Injury
  • Orthopedic Bio-mechanics
  • Patent Application Assistance
  • Patent Infringement and Validity
  • Check for SynapsUs
    Michael Nranian, JD, MBA, MS
    10945 Stoney Point
    South Lyon MI 48178
    USA
    phone: 248-376-0338 or 248-446-4052
    Michael_Nranian_photo.jpg
    Michael Nranian, JD, MBA, MS has over 30 years experience focusing in Product Development, Intellectual Property, Patent Litigation, Legal and Technical Compliance, and Product Liability Litigation. He is a licensed attorney in Michigan, Texas, & the United States Patent and Trademark Office. Mr. Nranian is a Six Sigma Black Belt, Professional Engineer, & Certified Project Management Professional. He has an in-depth background and education in Law, IP, Electrical, Chemical & Computer Engineering, & Business. He has testified extensively as an expert witness in depositions, hearings, and trials in state & federal courts.

    Mr. Nranian conducts Product and Technology Analysis, Patentability & Prior Art Research,and provides Technology & Litigation Support for Intellectual Property. His litigation background includes patent infringement / non-infringement under literal infringement and the doctrine of equivalents, patent validity / invalidity, prior art, & file-wrapper estoppel, for both ITC and Federal cases, including Inter Partes reviews. He conducts analysis of patents and products, prepares claim charts, & expert witness reports. This includes testimony and document preparation for cases before state, and federal court jurisdictions, and the International Trade Commission and the Patent Trial and Appeal Board.

    Mr. Nranian is thoroughly familiar with all 101, 102, 103, 112, and other enablement and prior art arguments. His experience includes Technology Standards Boards and Licensing Authorities, Antitrust / DOJ, Technology Development and Transfer, Patents, Trademarks, Trade Secrets, and Copyrights, Licensing, Unfair Competition/Trade, False/Deceptive Advertising, & Lanham Act Actions, & Class Actions.

    His Product Liability Expert Witness litigation background includes all types of Safety Systems, Electrical Systems, Fires, Accident Reconstruction, and Evaluation of Alternative Designs for Automotive, Medical and other industries. He has over 29 years of experience in Automotive Safety Systems, Sensors, Seatbelts, Airbags / Curtains, Seats, Diagnostic Systems, Crash Recorders, Crash Pulse Analysis, System Diagnostic, Fault Codes, Structure (including roof-crush and door) and front, side & roll-over systems (including sensing and algorithm development) for domestic and international corporations. He is thoroughly familiar with all regulatory (including FMVSS), and corporate due-care requirements, & preemption arguments, occupant kinematics, & injury causation.
    Check for SynapsUs
    Ralph Aronberg
    P.E., President
    13762 W. State Road 84, Suite 424
    Ft. Lauderdale FL 33325
    USA
    phone: 954-236-6605
    fax: 954-236-3327
    Ralph Aronberg, P.E., has reconstructed over 1,500 accidents and has testified in over 150 jury trials, since founding the firm in 1983. He provides Expert Witness services in the areas of:
  • Traffic accident reconstruction (cars, trucks, motorcycles and pedestrians).
  • Vehicle occupant kinematics (seatbelts)
  • Biomechanics
  • Traffic engineering design (geometrics, signing, markings, signals and lighting)
  • Sight distance analysis
  • Hazardous roadway conditions
  • Work Zone Traffic Control evaluation
  • Evaluation of roadway curvature
  • Traffic signal operations
  • Pedestrian safety
  • Computerized accident reconstruction and simulation
  • Vehicle "black box" data retrieval (certified>
  • Mr. Aronberg is published in the fields of pedestrian / bicycle / motorcycle accident reconstructions, and 3 Dimensional Animations and Scientific Visualizations through the Society of Automotive Engineers. Mr. Aronberg is a Fellow member of the National Academy of Forensic Engineers, and certified as a Diplomat in forensic Engineering.
    Check for SynapsUs
    Steven R. Thomas, P.E.
    Multiple Addresses (See Below)
    NJ, NH, ME, MA, VT ,RI, CT, NY, PA ,DE, USA
    phone: 877-267-7855
    fax: 973-401-0056 or 603-293-4142
    steven_thomas_logo.jpg
    New Jersey Office:
    PMB 4066
    55 Madison Avenue - Ste 400
    Morristown, NJ 07960
    T: (973) 401-0010
    F: (973) 401-0056
    New Hampshire Office:
    Analytic Engineering
    105 Juniper Ridge Road
    Gilford, NH 03249
    T: (603) 293-4477
    F: (603) 293-4142


    Analytic Engineering combines Professional Engineering with Effective Communication. We offer Technical Analysis and Services in the Engineering field and provide experienced Expert Testimony to communicate the conclusions reached.

    Engineering Services:
  • Mechanical Engineering
  • Safety Engineering
  • Vehicular Accident Reconstruction
  • Failure Analysis
  • Computer Animation
  • Premises Liability
  • Patent Claim Analysis
  • Product Design & Liabilty
  • Product & Equipment
  • Design Engineering Services
  • Steven R. Thomas, PE, the Principal Engineer at Analytic Engineering, earned his Bachelor of Science - Engineering (Mechanical and Electrical) at Widener University, Chester, PA in 1979 and a Master of Science in Engineering Science (Safety Engineering and Human Factors) at The New Jersey Institute of Technology in 1997.

    Professional Experience: Steven R. Thomas, P.E. has worked for such organizations as General Motors, Thomas & Betts, General Cable and Breed Automotive Corporation. He has worked in the engineering fields of Research and Development, Product Design, Machine Design, Manufacturing, Industrial, Tooling, Safety, Facility Design, Failure Analysis and Accident Reconstruction. Since 1991 Mr. Thomas has worked as an Engineering Consultant in the Forensic field and has testified in numerous jurisdictions.
    Check for SynapsUs
    Dr. Lewis R. Linet, Jr.
    19355 Sherman Way #22
    Reseda CA 91335
    USA
    phone: 818 772-6464
    fax: 818-772-6464
    lewis_linet_photo.jpg
    Expert Witness and Case Preparation Services provided for litigation involving Automobile Industry Standards & Practices, specializing in Dealership Operation, relating to Sales, Leasing, Finance, New & Used Cars, Service & Parts. Auto Industry Veteran Since 1978.

    Issues:
  • Fraud
  • Unfair Business Practices
  • Single Document Rule
  • Document Disclosure
  • Spanish Contracts
  • Finance Reserve
  • Payment-Packing
  • Purchase/Lease Flip
  • Rental Disclosure
  • Sales, Closing and Desk Procedures
  • 4-Squares
  • AB-68
  • Deferred Down Payment
  • Regulations M & Z
  • Wholesale Procedures
  • Reconditioning
  • Safety Inspection
  • Title History
  • Wrongful Termination
  • Discrimination
  • Wrongful Death
  • Class Actions
  • Sales & Management Training
  • Song-Beverly Lemon Law
  • American Bar Association
    Los Angeles County Bar Association
    Los Angeles Business & Resale Licenses
    Resume & References upon Request
    Check for SynapsUs
    Allan V. Wright
    Forensic Investigator / Collision Reconstructionist
    PO Box 272
    Ray Brook NY 12977
    USA
    phone: 518-524-0273
    AllwrightForensics-Logo.jpg
    Allan V. Wright is an experienced Forensic Investigator, Collision Reconstructionist, and Trainer with a strong practical knowledge base.

    Mr. Wright retired from the New York State Police Forensic Identification Unit after 31 years of service at the rank of Senior Investigator. He was an active member, as well as in charge of the Collision Reconstruction Unit for the five northern counties of New York State. During his career, he has investigated over 1,000 motor vehicle collisions and processed many crime scenes including homicide, rape, assault, etc.

    Mr. Wright began his training and experience as a Collision Reconstructionist in 1992 and since has received additional training in the fields of Commercial Motor Vehicles, Pedestrian, Bicycles, and Motorcycles.

    With additional training from the State Police in Forensic Photography, Crime Scene Processing, and Latent Print Examination and Analysis, Mr. Wright is trained in the field of Crime Scene Investigation as well. He rose to the position of member-in-charge of the State Police Troop Forensic Unit before his retirement, responsible for crime scene management and on-scene investigation and supervision and latent fingerprint search and analysis, in addition to training of all new unit members.

    A prior Adjunct Instructor in courses for Collision Reconstruction and Forensic Photography, Mr. Wright offers a 20 hour course offering hands on training in crime scene processing. Titled, Crime Scene Processing - A Common Sense Approach, the course is designed to aid the police officer or investigator in scene documentation, evidence collection, and court presentation.

    Litigation Support - Allan V. Wright has given expert testimony in the field of Collision Reconstruction as well as Crime Scene Investigation. He has testified in criminal court in various County and Local courts, as well as Grand Juries in Franklin, Clinton, Essex, Hamilton, and St Lawrence Counties.

    Areas of Expertise:
    • Motor vehicle collisions
    • Time / Distance Studies
    • Speed Calculations
    • Bulb Examination
    • Tire Examination
    • Seatbelt Assessment
    • Pedestrian and Bicycle
    • Commercial Motor Vehicles
    • Motorcycle
  • Scene Assessment
  • Vehicle Impact Speeds
  • Area of Impact
  • Seatbelt Usage
  • Sight Distance Analysis
  • Perception Reaction Analysis
  • Crash Avoidance Possibilities
  • Damage Profile Assessment
  • Police Report Review
  • Check for SynapsUs
    Jason Young, BESc., MASc, PEng
    2770 Dufferin Street, Suite 207
    Toronto ON M6B 3R7
    Canada
    phone: 416-630-0700
    Human-Factors-Forensics-Expert-Witness-Jason-Young.jpg
    Jason Young, BESc., MASc, PEng, is the lead investigator and President of Advantage Forensics Inc., a multi-disciplinary forensic engineering firm based in Ontario with service across Canada and the U.S. Their team of renowned and well-respected experts at Advantage Forensics have conducted thousands of forensic investigations in the following areas of expertise, at fair rates, with tremendous success for insurance defense and plaintiff clients
    • Collision Reconstruction - pedestrian, nighttime visibility, motorcycle, bicycle, trucks, data recorder download & analysis, multi-vehicle freeway collisions, computer simulation, winter maintenance, snowmobile, Segways
    • Human Factors - reaction times, driver behavior, road design & signage, warnings & labels, product misuse
    • Slips, Trips & Falls - friction testing, staircase building code assessment, fall hazard assessment
    • Biomechanics - seatbelt use, injury thresholds, fraud investigations, fall dynamics
    • Product Failure - materials failure, design assessment, safety factor testing
    • Playground, Fitness Equipment & Sports Accidents
    • Waterpark, Pool, Zipline & Amusement Ride Accidents
    • Fire & Explosion Investigation
    Their team of over 25 experts and consultants is led by Jason Young, a licensed professional engineer and seasoned expert with over 20 qualifications at Superior Court level and Arbitrations as an expert in Collision Reconstruction, Human Factors, Mechanical Engineering, Road Design Assessment, Waterslide Design, and Biomechanics. Mr. Young has a Masters in Biomedical Engineering and is also a Certified Playground Inspector and Certified Level 2 Zipline & Challenge Course Inspector. Mr. Young has taught numerous courses on Collision Reconstruction, Human Factors and Biomechanics to academia and is a sought-out expert panelist at insurance and research conferences in those fields. Mr. Young is a long-time member of CATAIR, HFES, and ASTM, and has contributed to numerous research papers and standards in collision reconstruction, human factors, and product design.

    Visit their website at www.aforensics.ca/ for more information regarding their team of experts and services. They offer reasonable hourly rates or fixed quotes that are guaranteed within 10%.

    View Advantage Forensics' Consulting Profile.
    < 1 2 >