Building Materials Consultants: 8

Dmorris.consulting Freelance Consulting provides Corporate services to the Construction industry. Principal, David Morris, has over 30 years of deep understanding and hands on experience of Construction and Construction Processes that give him a unique perspective in the industry.

Select Background Experience:

• Prior to founding DMorris.consulting, Mr. Morris served as Director of Virtual Construction for EMCOR Construction Services from 2008-2016. In this role, he directed the virtual construction activities and operations of 82 EMCOR companies. His scope of work included drafting contract language for BIM and pre-construction, setting up new projects in lean and BIM delivery methods, and reviewing new construction technologies among other duties.
• From 2001-2008, Mr. Morris worked with University Mechanical and Engineering Contractors as Director of Virtual Construction. He was responsible for estimating Plumbing, HVAC Piping and Process Piping for numerous research laboratories and healthcare facilities valued at over 100mm + each. He also delivered conceptual estimates for numerous Biotech, Power, and Co-Generation plants.
• Select Project Participation: San Joaquin County Hospital, City of Gilroy Waste Water Reclamation Plant, Shafter Prison, Vandenberg Air Force Base HVAC Replacement, Space Shuttle Launch Complex Project, Tehachapi State Prison Level-4 High Security Prison Housing, Cal Poly San Luis Obispo Co-Gen Facility, Kern Medical Center New Hospital Wing Expansion, Anheuser Busch Yeast Plant Expansion, and multiple Piping, Petrochemical, Hospital, and School projects.

Business Consulting Services:

Process Transformation Estimating Standard Operating Procedures (SOPs) Recruitment Qualification Assistance Job Descriptions

BIM Processes Initial Design, Construction, Operations, Maintenance Project Recovery Assistance Creation and Implementation of “Best Practices” Mechanical, Electrical, Plumbing Coordination (MEP)

*This Mechanical, Electrical, Plumbing, and Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation Models and Deliverables is a derivative work of a best practice guideline written by David Morris in 2003 and modified for the AGC BIMForum in 2009. It is the result of capturing ten years of practical methods on real world construction projects and reflects continual feedback and improvement gained from that process.

View David Morris' Expert Witness Profile.

Dr. Fari Barzegar is a Licensed Engineer with 37 years of experience in Civil and Structural Engineering & Construction Forensics, Construction Project Management, university teaching/research. He has been an Expert Consultant / Witness in over 100-cases.

Litigation-Support Consulting Expert Witness with testimony and trial experience. Has been retained by insurance companies, law firms, construction, energy, mining, technology & manufacturing industries, governmental & educational institutions, engineering and architectural firms, property owners and individuals. Consultant in both plaintiff and defendant cases.

• Insurance & Surety Claims, Peer Reviews
• Buildings, Structures & Materials: Residential, Commercial, Institutional, Historic Structures; Bridges, Towers, Stacks/Chimneys, Containment Vessels, Tanks, Grain Silos, Conduits & Pipelines, Retaining Walls, Foundations, Slabs & Pavements; Concrete, Steel, FRP Composites, Wood, CMU, Brick Masonry & Adobe
• Design / Construction / Integrity issues, Seismic Resistant Design; Errors & Omissions;Standards of Care; Repair & Retrofit Design Documents
• Construction Defects & Accidents; Defective Concrete; OSHA Standards, Excavations / Trenching / Scaffolds
• Slip/Trip/Fall, Code Compliance
• Damage & Failure Investigation; Due Diligence; Non-Destructive Testing 
• Explosion, Impact, Earthquake, Wind, Fire, Hurricane & Flood Damage Inspections / Analysis/Report
• Pile Driving & Demolition Damage to Adjacent Facilities: Vibrations, Cracking / Settlement
• Dynamic, Fracture, Thermal & Finite Element Stress Analysis; Product Design; Failure Simulation / Reconstruction
• Intellectual Property & Patent Infringement

As an arbitrator, structural/civil engineer, and expert forensic consultant with nearly four decades of experience, Casey Hemmatyar has provided extensive expert services for defendants’ and plaintiffs’ attorneys on numerous construction litigation matters throughout the United States and Canada.

He has been retained as an expert engineer in over one hundred litigation matters on single and class-action legal cases by the U.S. government, law firms, and insurance carriers at the State and Federal levels, working with both plaintiff and defendant sides.

A partial list of litigation cases is available upon request. His understanding of core engineering and legal concepts has enabled him to assist a wide range of clientele effectively. He brings diversified experience in structural and civil engineering design and forensic engineering, investigation, and evaluation.

He also conducts research, has assisted in the development of building codes and standards, and has supervised the construction of domestic and international projects. His experience includes special structures and new buildings as well as modifications, alterations, seismic/hurricane retrofits, and upgrades to existing structures. He has provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for numerous litigation and insurance-related matters.

He actively presents continuing education lectures to audiences of licensed engineers, architects, and general contractors on topics of structural and forensic engineering throughout North America. Mr. Hemmatyar has been the principal structural engineer on high-profile projects for prestigious clients, including NASA and other notable organizations.  Currently, he directs PSFEG and has served as Director for SEAOSC from 2011 to 2013.

His work encompasses a diverse range of structures, including hospitals,  educational institutions (including schools and universities), telecommunication centers, aviation facilities, government buildings, laboratories, as well as commercial, industrial, and residential structures.

Quilici Engineers, Inc. draws on over 35 years of Structural and Civil Engineering experience to deliver a wide range of design and support services, tailored to meet their clients' specific needs.

Consulting Services:

Structural and Civil Engineering - Providing the very highest quality, most cost-effective solutions that take advantage of our automated engineering design capabilities, delivered on time and to the highest standards. Includes Commercial Development, Residential Development, Luxury Residential, Remodeling Restoration.

Pool and Water Services - Compu-Pools, a subsidiary of Quilici Engineering, uses the latest technology to deliver calculations and drawings for pools, spas and water features. Specialties include deep or shallow foundations, expansive soils, and hillside construction. They can help with structural repairs, construction support and design.

On-Call Engineering Services - When safety or other factors require immediate response and quick turnaround for needs such as on-site investigation and remedial repairs. Specializing in Building Evaluations, Dry Rot and Decay Repair, Insurance Evaluation, Insurance Evaluations, Fire and Earthquake Repair, Construction Support, Municipal Processing, Construction Support 

Joseph A. Quilici, PE, CE, SE, CCI, is a Registered Structural and Civil Engineer in the state of California and is a Certified Construction Inspector. Mr. Quilici has over 35 years of experience in the construction industry. He has extensive knowledge of building codes and familiarity with innovative building systems.

Mr. Quilici's expertise includes consulting for pools and spas, restorations, commercial, industrial, and community developments, in addition to luxury homes and buildings. experienced with a diverse range of building materials, including tilt-up concrete, structural  steel, post-tensioned concrete, concrete masonry, foam block, light gauge steel, and timber.

Qualifications:

• Licensed Structural Engineer, 36 years, 1986
• Licensed Civil Engineer, 40 years, 1982
• University of California, Berkeley, MS Civil Engineering - Structures, 1980
• US Green Building Counsel LEED, Accredited Professional, May 2009
• US Build it Green, Certified Green Building Professional, September 2009
•  Forensic Expert Witness Association Board of Directors - Past President
• Board Certified Forensic Litigation Consultant

View Joseph A. Quilici's Expert Witness Profile.

Tom Jonaitis, DABT, is a Board Certified Toxicologist and Product Safety / Regulatory Consultant with 18 years of experience. He has broad expertise in the areas of Safety and Exposure Assessment, Regulatory Compliance, and Toxicology Evaluations.  

Mr. Jonaitis helps companies efficiently navigate and comply with various regulations and obstacles in the consumer product, food, cosmetic, dietary supplement, and chemical industries. His has co-authored several manuscripts in peer-reviewed journals on the topics of safety, risk assessment, and other research.

Background Experience - Prior to forming RegTox Solutions, Mr. Jonaitis served as Manager of Toxicology & Regulatory Affairs at Intertek Scientific & Regulatory Consultancy (2005-2018). He worked as subject-matter expert (SME) and client contact for matters related to California Proposition 65, including presenting webinars and presentations. He also conducted human exposure assessments in relation to chemicals in food, dietary supplements, consumer products, cosmetics, as well as deriving exposure limits for carcinogens, reproductive / developmental or other toxins using traditional and benchmark dose modeling approaches.

Business Consultant Services:

• Regulatory Compliance Evaluations
• Scientific Literature Hazard Reviews and Summaries for Chemicals / Substances
• Creating Pre-Market Quality and Safety Dossiers for Novel Food / Dietary Supplement Ingredient Applications (primarily for US, Canada, Australia)
• Safety Assessments
• Label Claims Analysis and Compliance
• Deriving Exposure Limits
• HazComm, Pesticide Applications, and various other niche areas
• California Proposition 65 Compliance (and how to avoid costly enforcement)

AVAILABLE NATIONALLY
CERTIFIED RESTORERS * CERTIFIED INDOOR ENVIRONMENTAL CONSULTANTS *
CERTIFIED MICROBIAL REMEDIATION SUPERVISORS * CERTIFIED ENVIRONMENTAL INFECTION CONTROL CONSULTANT * CERTIFIED STRUCTURAL DRYING SUPERVISOR * CERTIFIED INFRARED THERMOGRAPHERS *
IICRC CERTIFIED MASTERS * LIC. GENERAL CONTRACTORS #299472

SUMMARY OF EXPERIENCE

 Brian Spiegel and David Spiegel offer expert testimony and consulting services regarding smoke, water, fire, mold contamination property damage restoration, reconstruction, and construction defect related problems. Both have been speakers nationally and internationally on property damage restoration, construction, and mold contamination related topics. In the past at the Property Loss Research Bureau (PLRB) national mold symposium in Charlotte, North Carolina and at the Forensics Consultants Association on toxic mold litigation and mold remediation in Newport Beach, California. In the media, Brian and David have written articles for industry trade magazines and given television and radio interviews, including one with Brian on ABC TV “Good Morning America” featuring a segment on mitigating water damage. 

CONSULTANTS AND EXPERT WITNESS

Mold & Bacterial Contamination Construction Defects Fire & Smoke Damage Industry Standards of Care

Structural Damages Water Damage Sewage Backflow Flooring Forensics

EXPERT SERVICES

Property Damage Contractor Inspections & Formal Reports Cause and Origin Investigations Smoke Particulate Testing Property Insurance Claims Testing

Detailed Construction Estimates Cost Damage Appraisals at Current Industry Pricing Litigation Support Infrared Structural Inspections Concrete Moisture Testing

PROPERTY DAMAGE ASSESSORS

• Residential and Commercial
• Appraisal Process: Appraisers & Umpires
• Contents and Structure

William C. Stein, Jr., PE, CCM, has more than 45 years of Roadway / Heavy Highway Construction and Materials Engineering experience. He has a rich and varied work history that includes construction materials engineering for highways and bridges, industrial plants, high rise offices, and power plants. He has worked for private owners and general contractors as well as the Department of Transportation.

Litigation Support - Mr. Stein Offers consulting and expert services for attorneys on issues regarding road, street, highway, temporary traffic control, runway, and earthwork; asphalt, concrete, coatings and other construction materials; designs, plans, specifications, CPM scheduling (Primavera) and contract documents; right-of-way issues; and work zone safety. Licensed in Louisiana, Pennsylvania, and Texas, he performs contract performance forensic investigations and provides consulting, expert reports, rebuttals, and testimony if required.

Areas of Expertise:

Highway Construction Roadway Construction Bridge Construction Highway Engineering Materials Engineering Construction Site Work

Traffic Safety Concrete / Cement Building Contractor Liability Construction Damages Scheduling Delay and Analysis Soil Analysis

Certifications:

• Certified Construction Manager (CCM)
• Certified Primavera Basic (CPM)
• Certified Primavera Advanced (CPM)
• Certified LADOTD Structural (bridge)
• Inspector/Technician Certified Troxler
• Humboldt Nuclear Moisture/ Density Operator
• Lead Abatement
• Certified Quality Compliance Surveillance in Fossil Power Plants, Organic & Inorganic Coatings Application and Inspection
• Certified Traffic Control Supervisor
• Certified Flagger Instructor

Summit Associates of Bedford is a Materials and Manufacturing firm offering growth strategy, operations improvement, and international sourcing to commercial clients ranging in size from $3 to $150 million.

Summit Associates has a record of fixing troubled organizations and driving growth in complex technology based operations. Skilled at positioning small and middle market companies for sustained growth, they have commercial experience in ten countries, including creation and oversight of global partnerships in Europe and India and acquisition, sale, and licensing of fifteen technologies in seven countries.

Consulting Services:

Turnaround Leadership Organizational Change and Alignment Accelerated New Product / Market Development Product Launch

Lean Manufacturing Technology Acquisition Sale and Licensing International Partnerships Technology Valuation

Principal, Thomas W. Caldwell, PE, has over 40 years of experience in Materials Research and Development, Process and Product Development, and Manufacturing Operations in the Precision Cast and Machined Products industry.

Mr. Caldwell has designed and manufactured components for consumer and industrial products, including safety-critical applications such as aircraft landing gear brakes, seat belt lockup devices, windshield wiper, and window lift motor systems. He has experience creating and guiding technology development and manufacturing partnerships in Europe and Asia, licensing and selling intellectual property and creating supply chains in China.

Mr. Caldwell has lectured in the USA, Germany, Switzerland, and India on manufacturing premium quality metal products and manufacturing processes, and was a technical paper peer reviewer for 20 years for the Society of Automotive Engineers. A United States patent holder, he has published peer reviewed research in electrochemistry and materials processing, and has written and spoken numerous times on the subject of Materials Selection.

View Thomas A. Caldwell's Expert Witness Profile.