1/28/2006· Failure Analysis

Wine Bottle Failure Analysis

By: Dr. Thomas Read

Note: Glass Fractography is the most effective method for determining why a glass object, such as a bottle, failed. This technique consists of examining the fracture surfaces of the failure for artifacts such as Wallner lines and using them to trace the crack back to its origin

5/21/2012· Failure Analysis

Failure Analysis: Product Liability & Personal Injury Involving a Broken Grinding Wheel

By: Dr. Thomas Read

This grinding wheel was part of a product liability and personnel injury case. It was claimed that the subject wheel had unexpectedly failed (i.e. flown apart) and an escaping piece had hit the plaintiff in the face causing serious injuries. According to the user, the grinder with the wheel was purchased approximately one hour before the grinding wheel failure.

3/29/2012· Failure Analysis

Failure Analysis: Collapse of Plastic Chair

By: Dr. Thomas Read

A failed plastic lawn chair was examined to determine the cause of failure. This chair failed on the premises of a restaurant In this study the subject chair is examined and compared to several exemplar purchased at the same time. The objective of this study is to determine the cause of failure.

11/8/2011· Failure Analysis

Root Cause Failure Analysis of Tempered Glass Door

By: Dr. Thomas Read

Glass Failure Analysis Expert Witness performs a failure analysis of a several tempered glass doors that had "spontaneously" failed at a construction site. The objective of this glass failure analysis is to determine the cause of failure and make recommendations to the contractor.

8/7/2012· Failure Analysis

Failure Analysis: Metal Fatigue of Automatic Machinery - Wafer Test Station

By: Dr. Thomas Read

During normal operation, the arm on an automatic wafer test station failed. Root cause failure analysis determined that the drive shaft on the right angle gear motor used to raise and lower the manipulator arm had failed first.

5/17/2011· Failure Analysis

Plumbing Failure Analysis: Stress Corrosion Cracking of Yellow Brass

By: Dr. Thomas Read

A plumbing failure analysis was performed to determine why a cold water supply line to a bathroom sink had failed after only one year of service.

4/1/2011· Failure Analysis

Failure Analysis of a "Exploding" Beer Bottle: Product Defect, Product Liability

By: Dr. Thomas Read

A glass failure expert witness performs a root cause failure analysis on an exploding beer bottle. The object of this root cause failure analysis is to determine the cause of the bottle failure.

7/7/2009· Failure Analysis

Failure Analysis of a Failed Ceramic Water Holding Tank on a Toilet

By: Dr. Thomas Read

The cracked tank was first inspected in the "as received" condition. In this condition it was cracked, but it was still whole. Next, the failed tank was separated by pulling it apart. This was done to expose the fracture surfaces of the main crack. This allowed for a complete failure analysis and for a determination of where the crack initiated.

8/30/2011· Failure Analysis

Metal Failure Analysis: Metal Food Contaminant Failure Analysis

By: Dr. Thomas Read

Materials failure analysis expert performs a failure analysis to determine the source of a metal piece found in tomato product.

4/20/2022· Failure Analysis

Glass Coffee Pot Failure Analysis: Thermal Shock Failure Of Borosilicate Glass Coffee Carafe

By: Dr. Thomas Read

The fatigue failure initiated on the outside bottom where the carafe had been scratched with the abrasive scrub pad. As a result of cyclical thermal shock (between 195°C and 15°C), the cracks grew progressively till it reached a critical length. Glass thickness at the origins is approximately 3 mm. One failed after 12.