Accident Investigation and Reconstruction Consultants: 56

Mechanical Solutions, Inc. (MSI) provides new equipment design, computer-aided analysis, installed equipment field testing and problem solutions. MSI staff performs these tasks for all types of Pumps, Compressors, Fans, Turbines, and Motors. For pumps and compressors, expertise includes both centrifugal and positive displacement (e.g. reciprocating or screw) configurations.  Turbine knowledge and experience include hydraulic turbine generators (“hydroturbines”) as well as aircraft gas turbine engines and land-based gas or steam turbine power generation systems. Applications include green energy, power, process, petrochemical, paper, and water resource industries.

MSI uses advanced finite element analysis (FEA), rotordynamics, and torsional analysis tools, and uses computational fluid dynamics (CFD) to analyze 3-D steady or unsteady fluid flows and heat transfer, enabled by its 230 high speed processor supercomputer. MSI also uses top-of-the-line testing equipment, including multichannel FFT analyzers (up to 200 simultaneous channels) to accurately read the outputs of various vibration, stress/strain, and pressure sensors, as a function of both time and frequency. As a unique additional test capability, MSI uses motion magnification video cameras to amplify and display scene vibration by 1000x. MSI uses calibrated exciters while equipment remains running, to locate structural, rotor, and acoustic natural frequency resonances as they exist at any particular operating point, without interfering with machinery operation.  In addition, MSI performs stress, acoustic, dynamic pressure pulsation, electric current spectrum, and aero/hydraulic performance testing. 

MSI also has been project team leader in the development of advanced rocket turbopumps, as well as turbopump diagnostics, for the U.S. Air Force and NASA Marshall Space Flight Center. MSI is funded for several large projects with the U.S. Navy and Air Force involving vision-based systems that automatically evaluate and display/amplify machinery or system dynamic events.  As a result of these projects, MSI has developed its VibVue® vibration motion magnification system, which can magnify vibration 1000x in the full field-of-view of the equipment.  This system is available as a service, or for purchase.

Mechanical Solutions has a staff of approximately 30 technical professionals, many of whom are well known internationally in the area of pumps, compressors, and turbines.  For example, MSI’s Dr. Edward Bennett won the ASME Gopalakrishnan award for best pump fluids technologist, and was later awarded another ASME medal for CFD.    MSI’s Paul Boyadjis has won the Hydraulic Institute 2021 Standards Partner of the Year award. Since its founding in 1996, MSI has strived to provide best-in-class service throughout the world.

William D. Marscher has over 50 years of experience in the field of Fluid Systems and their rotating and reciprocating machinery, particularly large turbines, generators, compressors, and pumps.  His typical work responsibilities include design, analysis, and testing of all types of plant machinery, as well as other types of fluid and mechanical systems.   

Mr. Marscher received a B.S.M.E. from Cornell University in 1970, and a Master Eng. (Mech. Des.) in 1972, when he was a NASA Fellow and the lead graduate student for the original Mars Rover Design project.  In 1976, he received an M.Sc. in Engineering Physics from Rensselaer Polytechnic Institute. He is a registered and licensed Professional Engineer, State of New Jersey Lic. No. 40626.

For 25 years, Mr. Marscher has been one of the U.S. voting representatives on the ISO (International Standards Organization) TC108 committee, and has been the US Coordinator concerning, among other issues, machinery dynamics of centrifugal pumps and hydraulic turbine generators. He is past president of the Society of Tribologists & Lubrication Engineers (STLE), the primary technical society worldwide for the study and design of bearings, seals, wear, and erosion issues in machinery.  For the past 45 years he has been a voting member of the ASTM Fatigue Standards Committee E9, as well as the ASTM Wear & Erosion Standards Committee G2.  He is also the past Board of Directors Chairman for the Machinery Failure Prevention Technology Society (MFPT), and has been active in the Vibration Institute.   Mr. Marscher is a 23-year member of the Texas A&M Turbine-Pump Users Symposium Advisory Committee (essentially the Board of Directors for the Symposium).   For ASME, Mr. Marscher was Chair of the Predictive Maintenance committee, and was Organizing and Presiding Chair of the 1993 RoCon Rotating Machinery Conference and the 1995 Tribology Conference.

Mr. Marscher has written thirteen handbook chapters for various major engineering handbooks, which have focused on turbomachinery mechanical issues, including dynamics, and bearing and seal design   In previous employ, he was a senior engineer Pratt & Whitney Aircraft Engines, and Director of Mechanical Engineering for Worthington HQ (pumps, compressors, and turbines), and for Dresser Worthington Division after their acquisition of Worthington.   Later, he was VP of Concepts NREC, from which 30 years ago he spun off Mechanical Solutions, Inc. as an independent turbomachinery technology company.  He has since become a charter Standards Partner for the Hydraulic Institute (HI), the trade association for the pump industry, became Vice Chair of the vibration technical committee for HI, and was HI Standards Partner of the Year for 2018.   He also won the 2019 Vibration Institute MFPT Frarey Award for Diagnostics Excellence.

View MSI's Expert Witness Profile.

OrthoBioMech LLC provides Medical Device Development and Injury Biomechanics Analysis services to the orthopedic and legal fields. The founder, Mari S. Truman, PE, has more than 37 years of experience in Orthopedic Product Design and Development. As Principal Engineer, she acts as an R&D design and development consultant to the orthopaedic industry and an injury biomechanics and medical device forensic expert.

While working for and with the major US Orthopaedic companies, she designed numerous instruments and implants for repair of skeletal injury. Ms. Truman is named on 12 Orthopaedic Patents and frequently gives talks on implant design and injury biomechanics on topics such as: knee and thumb-based joint surfaces and kinematics, joint design, rapid prototyping, medical device design control, and injury biomechanics.

Ms. Truman founded and ran ArthroMotion (1993-1997) and Seabrook International LLC's Midwest Design Center (1999-2002). Her project experience (non-inclusive):

• Total and Hemi Joint Resurfacing Systems: Hip, Knee, Wrist, Ankle, Hand/Toe, CMC, PIP, DIP, Shoulder
  
• Trauma Systems: Plates, specialty screws, intramedullary nails, wires, cables, external fixation systems, spinal fusion systems
  
• Soft Tissue Reattachment Systems

Speaking Venues: ASME Congress, North American Spine Society, Southern Biomedical Engineering Conference, International Society of Biomechanics, National Manufacturing Week Conference, American Society for Surgery of the Hand, International Hand and Wrist Biomechanics Symposium, International Federation of the of the Societies for Surgery of the Hand, Vth International Symposium on Computer Simulation in Biomechanics, Indiana Medical Device Manufacturer’s Council, Ohio Bar Association and the Ohio Trial Lawyer’s Association.

View Mari S. Truman's Expert Witness Profile.

Trevor A. Sherwood, II, Owner of Pool Operation Management (POM), provides consulting services pertaining to all aspects of Swimming Pool Regulations, Maintenance, and Training. Mr. Sherwood offers services for swimming pool marketing and promotion, safety and health issues, general maintenance, pool troubleshooting, and liability and risk management as well as swimming pool problems and pool-related emergencies. POM has provided professional consulting for commercial aquatic facilities nationwide and as well as a myriad of state-centered advisory committees. They are also winners of the NSPF® Special Achievement and NSPF® Top Instructor awards. Mr. Sherwood and his team at POM provide consulting, training, and services for pools throughout the entire Northeast, the Southeast, Hawaii, Caribbean and South Pacific. Their clients include engineers, maintenance staff, service technicians, property managers, attorneys, health departments and homeowners in the areas of inspections, plan review, contract review, code interpretation, safety requirements, and management issues. Selected Achievements:

• Personally trained over 11,000 Certified Pool Operators® as of 2020.
• Lead instructor for the Northeast Spa and Pool Association to the VGB training team to provide training services on compliance with the Pool and Spa Safety Act to health and building code officials in NJ, PA, CT and NY
• Pool seminars for NJAA, PRPS, NJRPA, NJ ALPHI, NJ DOH
• Only CPO® certification presenter at the Atlantic City Pool and Spa Show, the largest pool trade show in the pool industry annually

View Expert Witness Profile.

As an arbitrator, structural/civil engineer, and expert forensic consultant with nearly four decades of experience, Casey Hemmatyar has provided extensive expert services for defendants’ and plaintiffs’ attorneys on numerous construction litigation matters throughout the United States and Canada.

He has been retained as an expert engineer in over one hundred litigation matters on single and class-action legal cases by the U.S. government, law firms, and insurance carriers at the State and Federal levels, working with both plaintiff and defendant sides.

A partial list of litigation cases is available upon request. His understanding of core engineering and legal concepts has enabled him to assist a wide range of clientele effectively. He brings diversified experience in structural and civil engineering design and forensic engineering, investigation, and evaluation.

He also conducts research, has assisted in the development of building codes and standards, and has supervised the construction of domestic and international projects. His experience includes special structures and new buildings as well as modifications, alterations, seismic/hurricane retrofits, and upgrades to existing structures. He has provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for numerous litigation and insurance-related matters.

He actively presents continuing education lectures to audiences of licensed engineers, architects, and general contractors on topics of structural and forensic engineering throughout North America. Mr. Hemmatyar has been the principal structural engineer on high-profile projects for prestigious clients, including NASA and other notable organizations.  Currently, he directs PSFEG and has served as Director for SEAOSC from 2011 to 2013.

His work encompasses a diverse range of structures, including hospitals,  educational institutions (including schools and universities), telecommunication centers, aviation facilities, government buildings, laboratories, as well as commercial, industrial, and residential structures.

Dr. J.P. Purswell, PhD, PE, CPE has extensive experience in Human Factors, Ergonomics and Safety Engineering. He has completed projects for clients in all these areas and regularly teaches ergonomics and safety engineering at Colorado State University. 

Dr. Purswell Consults with Manufacturers on Product Safety Issues, including Warnings and Instructions. He also Consults with Employers regarding the development and implementation of safe and ergonomically sound work practices, including the identification and control of ergonomic risk factors for back injuries and upper extremity cumulative trauma disorders. 

Dr. Purswell has prepared ANSI Z535 compliant instructions and warnings for attic ventilators, deer-stands, LPG hoses, ammonia hoses, warehouse rack systems, and arts and craft products among others. He has also prepared ANSI Z129.1 compliant warnings for a range of chemical products from gasoline pump warnings to brake pads and ammonia hoses, and OSHA and ANSI Z400.1 compliant material safety data sheets for several chemical manufacturers. 

He is the author of more than 20 publications or presentations on product safety, occupational safety, printed warnings, and auditory warnings. He has been inducted into Alpha Pi Mu, the Industrial Engineering Honor Society and is a recipient of the Gordon Fellowship from the University of Oklahoma. 

Consulting Services:

• Design and Testing of Instruction Manuals and on Product Warnings
• Usability Testing of Products for Ease-of-Use and Safety
• OSHA Audits for Employers
• Employer Training - Benchmarking Safety Performance Against a Company's Industry
• Employer Training - How to Prepare For OSHA Inspections

View Dr. Purswell's Expert Witness Profile.

R. Kevin Smith PE, BSME, MMAE, has been a specialist in Engineering Forensic Safety and Design for 35 years. He has consulted on over a 1,000 matters nationwide. Mr. Smith is a registered professional engineer and holds a BSME and MMAE from the Illinois Institute of Technology in Chicago. He specializes in Material Handling Equipment Safety, including lift trucks, dock safety, truck loading, conveyors, and aerial work platform safety.

Mr. has been actively involved as a member of the committee that writes the Safety Standard for Low Lift and High Lift Trucks (ASME/ANSI B56.1) for over 30 years. He also serves on the B56.6 committee (rough terrain lift trucks) and the ANSI A92.5 and A92.6 subcommittees (self-propelled elevating work platforms). 

Litigation Support - Mr. Smith formerly worked for Triodyne, Inc. for over 15 years as a forensic engineer/principal engineer. As President of R. K. Smith Engineering Inc., he currently has a laboratory for examination and testing, and owns or has access to varied testing equipment and tools. He has testified at depositions and trials on several hundred matters. Mr. Smith has performed hundreds of investigations into product failures involving injury and property damage, and has reconstructed numerous accidents. His expertise is available to counsel representing both Plaintiff and Defendant. Mr. Smith also is on the Adjunct Math faculty at Prairie State College. 

Areas of Expertise:

Forklift Trucks Aerial Work Platform Lifts Product Testing Material Handling / Lifting / Rigging Equipment Accident Reconstruction Machine Guarding Safeguarding Warnings

Agricultural and Construction Equipment Skid Steer Loaders Stability Testing Loading Dock Safety Consumer Products / Testing OSHA Citations Codes & Standards Standard of Care in Design

View R. Kevin Smith's Expert Witness Profile.

Since 1988, Real-World Forensic Engineering, LLC ("RWFE") has provided engineering services to industries and government labs, as well as litigation support to both plaintiff and defense attorneys practicing in many areas.

RWFE Areas of Expertise Include:

Components & Machinery Metallurgy & Corrosion Dynamics of Impact & Collisions Friction Analysis / Slips, Trips and Falls Intellectual Property & Patent Review Accident Reconstruction / Animation Computer Aided Design Education & Training

Electrocution & Switch Malfunction Grounding & Lightning Protection Lightning Impulse Testing Products and Premises Liability & Safety High-Voltage & Current Power Systems Bridge Design and Safety Fire & Explosion Cause and Origin And Much More...

At RWFE, we proudly distinguish ourselves by our Four C's:

CREDENTIALS. COMPETENCE. CREDIBILITY. COMMUNICATION.

Credentials:	B.S., M.S., M.Eng., M.B.A., J.D., and Ph.D. Degrees Licensed Professional Engineers in Mechanical, Electrical, and Civil Engineering Tenured University Professors and Professionals NAFI Certified Fire and Explosion Investigators (CFEI) Licensed Master Electricians
Competence:	Over 80 Combined Years of Experience in Engineering R&D, Industry, Academia, Consulting, and Expert Witness Litigation Support Over 120 Combined Deposition and Court Testimonies
Credibility:	Internationally Recognized in Our Areas of Expertise More Than $19 Million in Peer-reviewed and Funded Research Grants Over 200 Combined Scientific Publications and Journal Articles
Communication:	Over 20 Different Undergraduate and Graduate-level University Courses Over 30 Invited Short Courses, Talks, and Lectures

Design Evaluation – Accident Investigation – Intellectual Property - Failure Analysis – Fire Cause & Origin – Component Testing - Computer Aided Drafting – Accident Animation - Expert Witness & Litigation Support

www.ExpertEngineering.com

Joel Beal's experience includes leadership in System Design, Regulatory, and Advisory Roles, and extensive involvement with Commercial Fleet Operations. His education includes US, Canadian, State, and Provincial Commercial Motor Vehicles, legislation, regulations, and requirements. 

Mr. Beal has unique expertise in cutting-edge trucking technologies, logistics, and regulatory knowledge ensuring effective and compliant strategies and achieving significant efficiency gains. He delivers consultancy services that Optimize Trucking Operations, Ensure Compliance, and Drive Innovation. He offers answers for both corporate clients and legal professionals and has over 30 years of results for all sizes of transportation companies and law practices.  

Consultancy Services Offered:

• Technology Integration: Analyze and integrate technologies to streamline operations.
• Performance Optimization: Implement process improvements to boost efficiency.
• Regulatory Compliance: Conduct audits to meet industry and regulatory standards.
• Safety Protocols: Enhance safety procedures to mitigate risks.
• Strategic Solutions: Align technology initiatives with business objectives.

Background Experience: 

• From 2008-present, Mr. Beal owns Rockwell Technologiy, Inc and JBA Telematics.  This includes short term and extended consultancy engagements with technology providers.  Focus is TMS and telematics to North American trucking companies.
• From 1994-2007, Mr. Beal served as Senior VP for Tripmaster Corporation, which invented Onboard Computers for trucks in 1978. Tripmaster provided systems for most of the US Fortune 500 companies who had private fleets.

View Joel Beal's Expert Witness Profile.

Rocky Mountain Safety Consulting, Inc. (RMSC), formulates effective and workable Safety Solutions tailored to unique business operations. A well-functioning, self-sustaining safety program avoiding incidents eliminates project slowdown, costly damage to equipment, tough questions from clients, and, most importantly, injury to employees. RMSC provides services to the construction, manufacturing, mining, and oil and gas industries. 

RMSC Consulting Services:

• Safety Programs - Draft and implement safety programs followed by training of crews and management. JSA's and JHA's, weekly safety talks focused on work tasks
• EHS Programs - Develop and implement safety audit programs complying with OSHA and MSHA standards
• Field Auditing - Create and implement field safety audit systems, tracking deficiencies, and correction timelines and accountability. Jobs Safety Analysis implementation

Principal, Greg Gerganoff, ASP, CSP, Esq., is an OSHA / MSHA Safety field and compliance expert in the fields of heavy construction, oil and gas, mining, pipeline, power plant outages, light rail construction, public schools, manufacturing, and trenching and excavation. 

As OSHA and MSHA are not mere “guidelines to safety” but federal laws enforceable in administrate hearings and federal courts, Mr. Gerganoff's 12 years of experience as a Licensed Attorney, and additional 17 years as a safety professional, make him uniquely qualified to research and interpret OSHA regulatory laws (29 CFR 1910 & 1926) and MSHA (30 CFR Part 46). He maintains his license to practice law in the state of Colorado. 

Safety Training includes but not limited to:

PEC SafeLand Core and Basic OSHA 10 & 30 Hour Outreach Trainer Gen Industry H2S Training (in accord with ANSI Z390.1-2006) MSHA New Miner (Surface Metal and Nonmetal) Aerial / Man Lift Operator Training Power Tool Safety and Inspection

Hazard Communication Lockout / Tagout Confined Space Trench and Excavation Fork Lift Operator Training / Lifting Fall Protection

View Greg Gerganoff's Expert Witness Profile.

Michael C. Wright, PE, CSP, CPE is a Professional Engineer with over 35 years of academic, practical, and specialized knowledge of Engineering, Construction, Safety, Maintenance, Demolition and Training in general industry and construction activities.

 Mr. Wright's expertise is a definite plus in providing clients with leading edge information and insight. A licensed and practicing engineer, he rounds out his knowledge as a Certified Safety Professional (CSP) and Certified Plant Engineer to provide an insightful and accurate understanding of the issues involved in a case.

Mr. Wright has completed over 600 hours of specialized safety training, serves on ANSI and ASTM Standards committees and provides a thorough knowledge of OSHA Regulations, Directives and Letters of Interpretation. A recognized author, presenter, and trainer, Mr. Wright communicates the issues clearly for all to understand. His expert witness experience is a balanced blend of defense, plaintiff and OSHA Solicitor cases. He is licensed in 46 states. 

Areas of Expertise:

Safety Programs Construction Product Liability Fall Protection Programs Suspended Loads Contractors Formwork Leading Edge Work Activities Machine Guarding Safety Concrete, Wood, Steel Ladder Safety

Aerial & Scissor Lifts Anchorage Points - Fall Arrest Programs Bleachers Scaffolding Multi-Employer Concrete Formwork Construction & Demolition Roofing Crane Design & Inspection Training Safety Programs (Customized Manuals)

View Mr. Wright's Curriculum Vitae

School Bus Training, LLC has worked with many transportation shops and school transportation departments to evaluate their departments and offer recommendations to make them more efficient and function better as a unit. Training is offered in staff development and process improvement. Shop Evaluation Services Include:

Examining Current Department and/or Shop Operations Management / Work Team Evaluation Management and Employee Coaching Customer and Stakeholders Interviews

Processes Examined and Alternatives Discussed with Department Written Recommendations for Change and Alternate Options Follow Up Services as Requested Department and Individualized Training as Requested

Principal, Denny Coughlin is a nationally recognized School Bus Expert. Mr. Coughlin entered the school bus industry almost 40 years ago. He has toured every major school bus manufacturing plant in the country, and some in Canada. He stays current with the industry and understands the construction and design of the school bus from all the manufacturers. Mr. Coughlin has been the fleet manager for a fleet of over 400 vehicles for 25 years. Responsible for purchasing, maintenance, and disposal of the fleet, his annual state school bus inspection scores were among the best in the state. Mr. Coughlin has successfully instructed over 14,000 Firefighters, Law Enforcement, and EMTs on the characteristics and Safety of School Buses. He has overseen the destruction of almost 200 school buses in drills and demonstrations and currently offers multiple Fire Department and Law Enforcement Training Courses. Mr. Coughlin has worked with the Minnesota legislation concerning school buses for many years, and served on two governors' task forces, 1994 and 2006. Mr. Coughlin has successfully presented annually at the School Transportation News (STN) EXPO conference and at the National Association for Pupil Transportation (NAPT) every year since 1999. He presents at state and regional conferences on a regular basis. He has had many articles published in School Transportation News Magazine and conducted many webinars for the school bus industry. View Denny Coughlin's Expert Witness Profile.

Shatec Engineering Consultants provides engineering consulting services in a variety of areas including highway engineering, traffic engineering, pavement engineering, geotechnical engineering, materials engineering, forensic engineering, construction support services, and other civil engineering matters. Example services include the following:

Traffic Engineering Highway Design Standards/ Geometric Design/ Plans and Specifications Highway Specifications / Guidelines Highway and Traffic Safety Highway Safety Traffic Control Devices / Traffic Control Plans/ MUTCD Sight Distance Requirements Road and Roadside Hazards ADA Requirements Surface Conditions - Friction, Skid Resistance Road Defects Code Violations

Pavement Design/ Materials Pavement Management Geotechnical Engineering Construction Quality Construction Defects Construction Claims Drainage Requirements Hot Mix Asphalt/Modified Asphalt Structural and Pavement Concrete Standards Mass Concrete/ Thermal Control Plans/ Instrumentation Highway Repairs / Maintenance Public Agency Policies / Practices

President, Shakir Shatnawi, PhD, PE, is a nationally and internationally recognized leader in the Transportation Engineering industry. He has over 30 years of practical and extensive engineering and transportation expertise covering industry and public agencies including the Federal Highway Administration (FHWA) and the California Department of Transportation (Caltrans). He taught highway and transportation engineering at California State University.

Dr. Shatnawi served as a principal investigator on multi-million dollar transportation projects. He held various positions in Caltrans including a Senior Transportation Engineer, a Supervising Transportation Engineer and a Division Chief.  Dr. Shatnawi's education and experience demonstrates a wealth of engineering knowledge stretch in highway design, traffic engineering, pavement design, geotechnical engineering, materials and construction . As a recipient of many acknowledgements from the government, Dr. Shatnawi has an impeccable reputation within the industry for his significant professional contributions. As an expert orator, he frequently shares his knowledge at major conferences around the world. 

View Dr. Shatnawi's Expert Witness Profile.

SPORTFIT LAB is the premier Triathlon shop and performance center in Northern Virginia, providing a full range of training services and products to suit any athlete, whether you are a triathlete, runner, bicyclist, or swimmer. With more than 40 years of experience, they offer a level of personal attention and expertise unmatched in the region.

SPORTFIT LAB uses scientific fitness assessments to develop personalized training programs that meet individual needs. They teach techniques for training and racing, and monitor progress whether training for a first race, or a 10th Ironman event. They understand busy lifestyles, and tailor each program to fit around preferred training schedules, work schedules, and family schedules.

Testing and Coaching Services:

Triathlon Training Programs V02 Lactate Body Comp Testing Beginner Triathlete Training Triathlete Science and Tips

Clinics and Seminars Swim Analysis and Lessons Running and Gait Analysis Bike Fitting

Douglas Baumgarten, M.S., Principal at SPORTFIT LAB offers consulting services related to Fitness, Health Clubs, Exercise Equipment, Personal Training and Sports. Mr. Baumgarten is a graduate of Harvard University and California University of Penna. (M.S. Exercise Science). He is a certified Health / Fitness Director (Amer. Coll. of Sports Medicine), Performance Enhancement Specialist, Medical Exercise Specialist, Bike Fitter, cycling coach, and baseball/softball official. 

Mr. Baumgarten has over 40 years in the fitness industry, as personal trainer, manager, consultant, equipment dealer, President of a large fitness company, and owner of SportFit Consulting. He has contributed to Fitness Management magazine, Boardroom magazine, Club Management magazine, and other publications.

View Douglas Baumgarten's Expert Witness Profile.

Summit Associates of Bedford is a Materials and Manufacturing firm offering growth strategy, operations improvement, and international sourcing to commercial clients ranging in size from $3 to $150 million.

Summit Associates has a record of fixing troubled organizations and driving growth in complex technology based operations. Skilled at positioning small and middle market companies for sustained growth, they have commercial experience in ten countries, including creation and oversight of global partnerships in Europe and India and acquisition, sale, and licensing of fifteen technologies in seven countries.

Consulting Services:

Turnaround Leadership Organizational Change and Alignment Accelerated New Product / Market Development Product Launch

Lean Manufacturing Technology Acquisition Sale and Licensing International Partnerships Technology Valuation

Principal, Thomas W. Caldwell, PE, has over 40 years of experience in Materials Research and Development, Process and Product Development, and Manufacturing Operations in the Precision Cast and Machined Products industry.

Mr. Caldwell has designed and manufactured components for consumer and industrial products, including safety-critical applications such as aircraft landing gear brakes, seat belt lockup devices, windshield wiper, and window lift motor systems. He has experience creating and guiding technology development and manufacturing partnerships in Europe and Asia, licensing and selling intellectual property and creating supply chains in China.

Mr. Caldwell has lectured in the USA, Germany, Switzerland, and India on manufacturing premium quality metal products and manufacturing processes, and was a technical paper peer reviewer for 20 years for the Society of Automotive Engineers. A United States patent holder, he has published peer reviewed research in electrochemistry and materials processing, and has written and spoken numerous times on the subject of Materials Selection.

View Thomas A. Caldwell's Expert Witness Profile.

Swenson Consulting offers Snow Removal Services and developed its own proprietary snow operations software and can help business owners who desire to build or maintain a software package to assist their snow operations. They offer general business advice for many different types of situations including:

• Growth Development and Strategy for Snow Removal Businesses
• Diversification of Snow Removal Business Services
• Effective Collection of Invoicing for Snow Removal Businesses

Principal, Jeremy Swenson, CSP, has satisfied requirements by SIMA (largest nationally recognized snow and ice trade organization-Snow and Ice Management Association) to become a Certified Snow Professional. There are less than 250 CSP’s in the USA.

Mr. Swenson owned and operated Snowmen, one of the largest snow and ice management companies in North America for over 20 years. He has obtained Security Clearance and is trained for onsite snow operations at the IRS Regional Headquarters, FBI Headquarters, Department Of Treasury Buildings, and many types of Airport, Railroad, Organ Transplant Centers, and Medical facilities. He stays current with the modern methods and systems used today in snow and ice removal operations, procedures, equipment, contracts, and is very familiar with the types of de-icers used in the snow removal industry today. He has successfully navigated hundreds of slip and fall accidents and snow removal-related incidents. After overseeing thousands of commercial accounts over the years, he has worked through almost every issue that is relevant to a snow removal operation in the industry.

View Jeremy Swenson's Expert Witness Profile.