Glass / Windows / Windowall Construction Consultants: 7

John D. Shepherd, RRC, RROis the principal of Shepherd Consulting Services, a Building Envelope, Roofing, Waterproofing, and Exterior Walls  construction forensic consulting firm, and the Building Envelope Institute, a firm that develops education programs for construction professionals (consultants, architects , engineers, con- tractors, etc.).

Mr. Shepherd has been consulting for more 26 years and has been active in the construction industry for over 50 years, including 10 as a roofing contractor. He is an IIBEC Registered Roof Consultant (RRC) and RRO, a Haag Certified Commer- cial/Residential Roof Inspector, and a certified building science thermographer. Over his career in the industry, Mr. Shepherd has conducted thousands of building envelope investigations including those related to leak investigations, construction defect, property assessment inspections, and property damage claims.

Through Thermal Imaging of America, a Division of Sheperd Consulting Services, Mr. Shepherd uses Thermal Imaging and various moisture meters to accurately locate the cause of moisture intrusion into a residential or commercial building. Mr. Shepherd is a noted author speaker in his field of expertise. He has been delivering presentations on Roofing and Waterproofing nationally for approximately 25 years. He has served on the board of directors for both RCI, Inc. and the SoCal Chapter of RCI, and has served on a number of committees in RCI/IIBEC and on ASTM International.

Consulting Services Include:

• Roof Surveys
• Replacement Cost Analysis
• Life Cycle Analysis
• Specification and Detail Review / Development
• Leak Investigations - Cause and Origin

View Expert Witness Profile.

Rieser Building Group is a leading builder, engineer, architect, and forensic team with over 25 years of experience in management, design, and construction of over 4,000 units. These units range from custom homes, commercial buildings, and developments, to public works like Caltrans and BART construction, and roadway improvements (over 500 miles). With a full breadth of professional development services, they manage all aspects of a project, from entitlements to design to warranty.

Building Services - Design in-house, or, as licensed engineering and construction professionals, Rieser Building Group can manage an outside team of architects, civil engineers, structural engineers, and landscape architects.

Engineering and Design Services - Spearheaded by a professional Engineering & Architectural team, Rieser provides innovative designs and timely approvals in custom homes, commercial buildings, apartments, large developments, structures, topo-mapping, hydraulics, traffic engineering, and transportation engineering.

Development Services - Developing single custom-built home or a multiphase project, Rieser will expedite the development process, establish a joint venture to share costs, or purchase the project. In addition to flexible management, they conduct property feasibility studies to calculate the right mix of homes and maximize ROI. 

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC, has over 30 years of experience in the Construction and Building Design industry. He provides his clients with a comprehensive knowledge of Construction Technology and Construction Standards of Professional Practice. Background Experience - President of an active Design / Build company, Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes construction, management, and design of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrain, and BART. Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation / Traffic Engineering, Hydraulic Engineering, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert.

View Mark Rieser's Expert Witness Profile.

Expert Background: Dr. Thomas L. Read is the Principal and CEO at A. Read Consulting, LLC. He received his PhD. from Stanford University in 1972 and has over 25 years of manufacturing experience in electronics, metallurgy, factory safety, failure analysis, glass fracture, glass failure and bottle failure. As a member of the electronics industry, he has earned process patents and has an extensive background in manufacturing techniques. In parallel, Dr. Read has spent over twenty five years as a consultant to attorneys and engineers. He has given more than 100 depositions and has appeared in court numerous times. Company Profile: Read Consulting, LLC is a full service laboratory providing services in the following areas:

• Failure Analysis; Factory Safety and Personal Injury (including machine guards and manufacturing safety)
• Glass Failure Analysis - Glass Fracture, Glass Failures and Bottle Failure
• Metal and Ceramic Failure
• Grinding Wheel Failures
• Intellectual Property and Patent Disputes
• Product Liability and Product Quality
• Manufacturing Disagreements (such as Intellectual Property, Failed equipment and Contract Disputes)
• Reverse Engineering

Hastak Consulting Services is a Construction Engineering and Management firm established by Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak offers consulting services to clients around the world in the following areas:

• Project Controls and Risk Management
• Process Improvement of Capital Projects
• Profitability Improvement and Construction Analytics
• Process Improvement for Factory Built Housing
• Capital Rehabilitation Planning
• Strategic planning and decision-making for resolving project complexities
• Planning for Disaster Mitigation, Resilience, and Capacity Building

Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. He is a world renowned expert in the area of construction engineering and management including process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, factory built housing, intelligent planning for the built environment, project control, project management decision-making, risk management, contracts and warranties, and strategic planning.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry. His services include consultation, on-site investigation, data collection, assessment,and reporting.

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Prof. Hastak has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He has authored over 200 publications on process improvement, project controls, capital rehabilitation planning, strategic planning, and decision-making. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). 

Dr. Hastak is the current President of CIB (International Council for Research and Innovation in Building and Construction), He is also the academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII) and serves as the Chair of the Advisory Board of the Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016).

View Dr. Hastak's Expert Witness Profile.

DM Bekus Construction is a New Jersey Home Design, Construction, and Remodeling Contractor. For over 30 years they've been helping homeowners throughout the area improve properties and build homes. DM Bekus Construction delivers high quality, reliable construction services that help homeowners get more pleasure and enjoyment from their homes and buildings.

Services Include:

Principal, David M. Bekus has over 35 years in the Construction Industry specializing in home design, construction, and remodeling. He offers services to homeowner associations, housing communities, townhome complexes, property managers, and individuals. Mr. Bekus is licensed by the State of New Jersey as a building inspector (RCS, ICS, and HHS), a licensed home remodeler, and a licensed new home builder. He is also certified in Project Management, Cost Estimating, Construction Methods, Construction Site Safety, and is a EPA Lead Safe Certified Contractor. Mr. Bekus has been a project manager, overseeing all aspects of construction from conception and approvals to final sales for single homes and developments. He has designed and built over 100 custom homes.

View David Bekus' Expert Witness Profile.

Complete General Contractors, Inc., is a licensed General Contracting Construction Firm working throughout the Southeast for insurance companies, property owners, property managers, attorneys, and municipalities. They specialize in the cost estimation and causation of large loss complex property claims.

Services Include:

• Appraisal and Mediation Services - Fire, wind, flood, storm, hail, and water losses to residential, commercial, or industrial properties
• General Contracting Services - Restoration or general construction, commercial construction, or industrial construction projects all over the United States. Manage vendors and trades, handle project documents, and serve as an authority for project information to all parties throughout the construction process

John G. Minor, President of Complete General Contractors, is a third-generation Contractor and licensed instructor certified by the North Carolina Department of Insurance. He is a recognized expert on the costs and applications necessary to repair buildings damaged by manufacturer, builder liability, water damage or intrusion, mold, or asbestos.

Mr. Minor has provided for the successful restoration of millions of dollars in insurance restoration, building failures, and difficult repairs originating from defective construction practices and materials such as fire, wind, water, mold and mildew. His services were in demand for restoration on custom buildings on Bald Head Island. In addition to managing the business of Complete, Inc., John Minor teaches classes on mold and mildew remediation and prevention through proper building practices to a variety of clients thru Lorman Educational Services and other professional trainers.

View John Minor's Expert Witness Profile.

Architectural Forensic Consultants is a team of highly skilled professionals committed to delivering exceptional services in Architectural Forensics. With over 50 years of combined professional experience throughout the US, they offer a range of expert witness, building-related claim defense, building enclosure commissioning, architectural review consulting, and due diligence actions for property acquisition. Let us provide the expertise you need to ensure your projects

With years of experience and a team of experts who are actively practicing Architects with current AIA, NCARB, BECxP, and CSI accreditations, they provide top-notch analysis and reporting to help clients make informed decisions about your particular project.

Consulting Services:

• Building Enclosure Commissioning - Provides a framework for working with the architectural design and construction teams to help provide an optimized building enclosure that successfully performs and meets the Owner's Project Requirements. Includes providing construction document review, preconstruction meetings coordination, construction monitoring and performance testing of building enclosure components and systems to evaluate its resistance to water and air infiltration.
• Architectural Review- Provides expert outside review and consultation to Town or City Architectural Review Board members. Offer architectural standard reviews to help convey client needs and requests to architects and developers, streamlining your architectural review processes.
• Property Conditions Assessments- Commercial property and building assessments (also known as Property Condition Assessments or PCA's) are important for clients seeking to know the condition of a property or real estate they may be purchasing, leasing, financing or simply maintaining. PCAs identify deficiencies and can provide building users with a Capital Needs Plan.

Dan Weekes, AIA, NCARB, BECxP, CxA+BE, has over 25 years of Architectural and Engineering Building Envelope and consulting project management as well as litigation and deposition proceedings. As a licensed Architect, Mr. Weekes has experience with the design of new facilities and the implementation of repair programs to existing residential, commercial, and institutional facilities. He takes a common sense approach to design and focuses on optimizing building performance.

Mr. Weekes' goal is to Identify why buildings and structures in today's industry begin to fail well before they should, and provide consultation in the way of review, evaluation and testing during the construction process to greatly improve the overall performance of a particular project.

Jim Stutzman, AIA, NCARB, CSI, has over 45 years of exceptional Building Construction and Investigative Design work with an emphasis on expert litigation cases and design coordination.

Mr. Stutzman is an architectural forensic consulting and expert witness relating to the performance, failures, safety and hazards, code compliance, professional practice and construction contractual procedures for commercial, industrial and residential architectural projects and the contractual building process.

Forensic consulting services are focused on defense attorneys, insurance companies, financial institutions, developers, municipalities, and private clients. Mr. Stutzman has 32 years of experience as a Forensic Architect providing forensic analysis of building related claims and standard of care issues

View Architectural Forensics Consultants' Expert Witness Profile.