Engineering (General) Expert Witnesses: 89

Thomas J. Young, PE, has over 39 years of experience in national and international Transportation Construction, the Civil Engineering specialty regarding highways, bridges, rail, airports, harbors, and associated infrastructure.

Mr. Young is a skilled integrator of the parameters of program and project life cycles, leadership, management, business operations, engineering and construction. He has extensive knowledge of regulatory compliance, environmental processes, industry standards, best practices, and field operations in urban and remote areas.

Mr. Young has broad construction management and design background for many of the knowledge and skill areas required in mining operations, bridges, highways, land development, major soil/structure type facilities, land survey, and construction surveying, including work in Arctic facilities and in desert regions.

Selected Background Experience:

• Completed 34 bridge structure designs, seismic retrofits, and special studies, including large cut and cover tunnels and numerous other complex structures for the $700 million design/build Eastern Transportation Corridor toll roads in Orange County, California
• Bridge construction oversight on $1 billion Cypress Corridor reconstruction in Oakland, California. 
• $10 million Sunrise/Highway 50, and $40-$50 million Douglas/Interstate 80 Interchange and Corridor designs in Sacramento, California.
• Bridge and highway project development duties in Caltrans Districts 1-5, 7, 10-12.

Thomas J. Young: PowerTeam Interview

Litigation Support - Mr. Young can act as an expert witness in all cases related to Forensic Transportation Construction Engineering. A persuasive communicator skilled at negotiating successful outcomes to complex situations, his expertise at analysis, problem solving, and bringing parties together in the public and private sectors is an asset in his performance in forensic engineering and expert witness testimony.

Areas of Expertise:

ADA Violations Architecture Bridges Building Codes Civil Engineering Construction Accidents Construction Claims Construction Defects Construction Failure Analysis Construction Injuries Construction Safety / OSHA Cost Estimating / Overruns Design Codes Design Engineering Drainage Driving Human Factors Engineering Quality Assurance Fall Protection Forensic Engineering Investigation Geotechnical Engineering Highway Engineering

Highway Safety Hydraulics and Drainage Hydrology Industrial Facilities  Land Development Land Surveying Landscape Architecture Management Professional Responsibility Public Works Sewers Signage Strategic Planning Structural Engineering Structural Engineering  Failures Surveys Temporary Structures Traffic Safety Transportation Transportation Construction

View Civ-Tek International's Business Consulting Profile.

Dr. Glenn Prestwich  is a National Academy of Inventors fellow with over 45 years of experience as a professor, entrepreneur, and biotech startup C-suite executive. Dr. Prestwich specializes in Biomedical Intellectual Property. He has been a prolific inventor since 1977, and an expert witness in IP law cases since 2007. He is an inventor on over 95 patents and patent applications, including 48 issued patents.

Litigation Support - Dr. Prestwich brings to all legal and technical cases a deep appreciation for how chemistry informs the invention and development of products that offer solutions to problems in the life sciences and medicine, ranging from disease detection and treatment to tissue healing and regeneration. He’s been involved in intellectual property litigation that concern medical devices, diagnostics, new pharmaceuticals, drug delivery, agrochemicals, and consumer products.

As an expert witness, Dr. Prestwich enjoys the challenges of dissecting the validity (or invalidity) of patents in litigation. He appreciates the subtleties of claim construction and works collaboratively with attorneys to identify successful arguments based on sound science and legal principles. He has drafted over 40 expert reports, declarations, and affidavits in support of his attorney clients.  He has been deposed 18 times and testified in Court four times.

Glenn D. Prestwich on Accessible and Experienced Expert Witnesses

Areas of Expertise:

Organic Synthesis Natural Products Chemistry Medicinal Chemistry Mechanistic Enzymology Agricultural Chemistry Chemical Biology Biochemistry

Intellectual Property Litigation Medical Devices Diagnostics New Pharmaceuticals Drug Delivery Agrochemicals / Pesticides Consumer Products

Publications - Dr. Prestwich is an organized, clear, and effective writer. He has co-authored  over 610 additional peer-reviewed articles in the scientific literature, and written over 50 single-author scientific publications, reviews and book chapters. His publications encompass areas such diverse topics as anti-cancer drugs, gels for wound repair, cell therapy, and regenerative medicine, insect and pest control agents, cholesterol-lowering agents, lipids and cell signaling tools, and anti-inflammatory agents.

Since 2010, Craig Moskowitz, MBA, MS, PE, the President and Managing Member of CLM Engineering Associates, LLC (CLM), has been concentrating the comapny's focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, they offer construction management, civil engineering and building inspection services. 

CLM has extensive construction management experience on both commercial and residential projects. Projects have included:

•  Safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million<li>
• Designed document creation and management of high-rise construction in Manhattan
• Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating
• Directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. 
• Marketplace Services

Litigation Support - Forensic work related to evaluation of structural steel systems with commercial building construction and insurance-related claims due to storm damage on commercial and residential structures. Craig Moskowitz has been deposed several times in litigation matters. Mr. Moskowitz has testified 17 times in the past four years. 

View Craig Moskowitz's Consulting Profile.

Michael A. Pollock, PE, USPTO, is a Mechanical Engineer responsible for the design and engineering of commercial, industrial, manufacturing, institutional, and residential venues, as well as efforts relating to services and products used in and around these facilities. Mr. Pollock's full CV can be viewed at cogentexpert.com.

Business and industries include electronics, safety and construction, building materials, polymers and plastics, instrumentation manufacturing, petrochemicals, chemicals, pharmaceuticals, colleges, athletic facilities, textiles, coatings and resins, food storage, biosciences, supermarkets, inks & pigments, automotive, facility and real estate operations, agricultural, transportation, nuclear, healthcare, nutrition, retail, distributors, pulp and paper, packaging, utilities, apparel, and R&D centers.

Litigation Support - Mr. Pollock is a subject matter expert in Commercial and Industrial Engineering Applications and Projects, as well as engineering standards and applicable codes (ASHRAE, ASME, NIST, NFPA, NBIC, ASTM, SAE, LEED, ASCE, GMP, ISA, BOCA, and EPA Regulations.) He has engaged with local, state, and governmental officials and agencies regarding numerous matters over his commensurate years of experience.

Areas of Expertise:

Investment Engineering Economics Mechanical Engineering Standard of Care Architectural Standard of Care Construction Delay Construction Defect Construction Schedule Analysis Accident Analysis Metallurgical Failure Rotating Equipment Electrical Failure Chemical Failure Processes Instrumentation and Controls

Chillers Coatings Refrigeration Thermodynamics Water Treatment Steam Systems and Boilers   Power and Utilities Energy Conservation Environmental Impact Safety HVAC Project Management Product Development

Registrations

• Professional Engineer: PA (PE075410)
• American Bar Association (ABA) – Construction Forum
• Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration)
• United States Patent & Trademark Office Registered (USPTO)                              

Forensic Consulting Experience

Warehouse Distribution Facility – Maryland - Evaluated a $10M (million) claim relating to purported construction defect claims by the 600,000 sq. ft. facility owner against the facility construction contractor and an original equipment manufacturer relating to installed infrastructure in the facility. Developed an expert opinion and expert report regarding the analysis of the purported defects and a proposed repair solution to correct said defects. 

 Psychiatric Hospital Facility – North Carolina – Evaluated a $28M (million) construction claim by the general contractor against a hospital facility concerning a $100M facility construction project.  Developed an expert opinion and report for general construction issues, constructability, design revisions, and corresponding delay analysis for mechanical, HVAC, electrical, smoke and fire, structural, security and building automation systems. 

Forensics Consulting Work-in-Progress 

• 2022 – International Trade Commission (ITC) Matter – Resin Manufacturing Facility Construction Delay / Completeness Analysis
• 2022 – Mechanical Systems Coatings Matter Analysis
• 2021 – Industrial Manufacturing Facility Standard of Care Matter, Construction Defect, Construction Delay     
• 2021 – Electrical Distribution System Construction Defect Matter, Standard of Care
• 2021 – Hotel Facility HVAC Materials of Construction Related Defect Matter

Sanford C. Loy , CCM, B.Arch, MSCE, has over 40 years of experience in the Construction Industry. Mr. Loy has Degrees in Architecture and Engineering. A Certified Construction Manager (CCM), he is committed to the Code of Ethics and Standards of Professional Practice established by the Construction Management Association of America. CCM is the ANSI accredited professional designation for construction management and is the gold standard for CM service providers in over 145 countries.

Background Experience - Mr. Loy's experience spans virtually every type of building and design process. His strength centers on his understanding of the dynamics and interactions of the various trades and professions unique to every building project. He has experience with Construction Management at Risk, Construction Management Agency, Design-build, and Design-bid-build. Having successfully managed the completion of over one billion dollars of construction, Mr. Loy served as a Regional Engineer for the American Institute of Steel Construction and as Director of Construction and Development for Belz Enterprises, the largest development company in Tennessee, before founding Construction Strategies in 1988.

Litigation Support - Mr. Loy provides Construction Claim and Dispute Analysis services, with special expertise in Concrete Design and Design-Build. Having been a teacher of many of the principles and processes used in the industry he knows how to explain the difficult technical aspects of the information and analysis in a way which makes the facts understandable and believable to opposing counsel, insurance companies, judges, and juries. Mr. Loy has experience and provides assistance with various dispute resolution approaches, such as Owner / Contractor dispute resolution boards, arbitration, mediation, and provides expert witness testimony if necessary.

See services offered at https://www.construction-strategies.com/what-we-do 

View Sanford Loy's Consulting Profile.

Dr. Shaun Anthony Crawford, CIH, has a diverse 30+ year background in environmental health, safety and industrial hygiene consulting and litigation support, spanning government, industry, academics, residential and non-profit sectors. He holds a MSPH in Environmental Engineering / Industrial Hygiene and a Doctorate in Environmental Health Sciences with a specialization in industrial hygiene, both from the University of Alabama at Birmingham.

Dr. Crawford has held academic positions in Environmental Management, Urban Environmental Studies, and Environmental Health at three universities. He has a very successful business and litigation track record and is available for both plaintiff and defense representation.

Vapor Emissions from Building Materials Mold Contamination and Remediation Metals and Bacteria in Wastewater Construction Runoff and Sedimentation Pipeline Rupture

Superfund Communities Industrial Contamination PCBs AFFF / PFCs Aerosol Exposure and Lung Damage

For additional information, please consult Dr. Crawford's resume.

Dr. David A. Rockstraw, PE, is a distinguished figure in the fields of Chemical Engineering and Intellectual Property, with an impressive blend of academic and professional credentials. He has over 30 of years of experience in chemical processing and phenomena in industry, national labs, academia, and private consulting.

Dr. Rockstraw is the former Robert Davis Distinguished Professor and Academic Department Head of Chemical Engineering, Interim Academic Department Head of Mechanical & Aerospace Engineering and Creator and Director of Brewery Engineering at New Mexico State University, with over a decade of experience in the chemical process industry and national labs. 

Litigation Support - Dr. Rockstraw has supported NSF grants as a co-PI and consultant, testified in trials, arbitrations, and depositions on dozens of occasions, and has the experience of over 80 expert witness engagements and over 30 technical consultant engagements, the majority involving patent infringement, trade secret theft, and patent validity.  Work on these cases has frequently required Rockstraw to perform laboratory research or direct full-scale plant tests to collect the evidence needed to support a client’s position. He is a clear communicator, skilled educator, having experience in a wide range of chemical manufacture processes. Dr. Rockstraw is licensed in TX, NM, and CA.

Areas of Expertise:

Chemical Engineering Materials Engineering Chemical Plants Process Analysis / Forensics Chemical-related Intellectual property & Trade Secrets Explosions / Fires Chemical Safety /Hygiene Matters (Chemical and Materials Phenomena) Water

Petrochemicals Pharmaceuticals Agricultural Chemicals Fluorochemicals; Monomers, Polymers and Plastics Plutonium Processing Membrane / Electro Membrane Processes Biofuels Processed Foods

Dean Tekell Consulting provides expertise in the areas of Traffic Engineering, Parking, Public Transit, Vehicle Dynamics, Accident Reconstruction, and Technical Accident Investigation.

Often, government agencies, consulting engineers, architects, developers, business institutions, and attorneys must know how to move people and their goods safely and efficiently. The firm offers advice on site selection, traffic access, and traffic circulation on the site. The firm provides insight into potential problems with zoning and subdivision regulations. Traffic impact studies, traffic signal warrant analysis, traffic signal design and permitting services related to development activity are also available through the firm. Parking garage and parking lot operations are specialties offered to business institutions.

Other services include: Queuing Studies for drive-through services; Traffic Calming and neighborhood speed control; School trip and pedestrian safety plans; Traffic Accident Reduction and highway safety techniques; Transit Funding Operation; Intelligent Vehicle-Highway Systems.

Paul Eason is a Licensed Professional Engineer, Nationally Certified Fire & Explosion Investigator and Forensic Consultant. His expertise comes from a strong background in industry and academia. In addition to his consulting practice, he is a professor in the School of Engineering at the University of North Florida, and maintains a graduate faculty appointment in the Materials Science and Engineering Program at the University of Florida. 

Dr. Eason has testified in numerous trials and depositions in the following practice areas: 

Product Design & Manufacturing Analysis - Metallurgy & Materials - Fire & Explosions - Industrial Accidents 

Areas of Expertise: Product Liability and Materials Failure Analysis, Product Defect & Safety Issues including: Metals, Plastics, Glass, Ceramics, Corrosion, Fatigue, Overload & Material Selection 

Fire and Explosion Analysis including: cause and origin determination, product related fire causation, industrial process accidents, dust explosions, welding / brazing accidents

Arun Kumar, Ph.D. has 45 years of experience in Metallurgy, Materials Science and Failure Analysis of Metallic and Non-Metallic Materials at Rockwell International, Hughes Aircraft Company and EAG Laboratories. He manages and supervises approximately 10 engineers and technicians performing a variety of analytical services and failure analysis. Dr. Kumar provides metallurgical consultation, performs failure analysis and serves as an expert witness in product liability trials involving materials failures. He has extensive experience in metallurgical failure analysis of aircraft, helicopter, automobile and motorcycle components, machineries, medical implants, machine tools, household appliances and wildfire investigations involving utilities.

H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. 

Click here for my current CV

Background Experience - For the past 35 years, Mr. Floyd focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities worldwide for DuPont. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Litigation Support - Mr. Floyd has been providing expert witness services and litigation support for over 10 years. His expertise is available to counsel representing both plaintiff and defendant. Mr. Floyd's services include consulting, site inspections, testing, reports, depositions, and trial testimony when necessary. 

Areas of Expertise:

Workplace Electrical Safety Electrical Shock Arc Flash Electrical Safety Management Systems Electrical Codes and Standards NFPA70E & National Electrical Safety Code National Electrical Code Electrical Testing Instruments

Electrical Injury Electrocution Electrical Reliability Electrical Maintenance Electrical Construction Occupational Electrical Safety Electric Power Systems Overhead Power Lines

View Lanny Floyd's Consulting Profile.

James Parker has over 35 years of relevant industry experience specializing in Electronic Security Systems & Sensors, Electronics R&D, and New Product Development. He has in-depth knowledge of electronic product design in both Wired and Wireless Technologies and outstanding knowledge of Environmental and False Alarm Immunity. Products, such as alarm systems, that Mr. Parker led the design of, have an installed base in the millions. 

Litigation Support - Mr. Parker provides Patent Litigation support to counsel representing both Plaintiff and Defense and is experienced with civil liability, criminal and patent litigation, including Inter Partes Reviews (IPRs). He has the ability to explain complex technical material in a straight forward manner. Mr. Parker's past clients include Cravath, Swaine & Moore LLP, Weil, Gotshal & Manges LLP, Fish & Richardson PC, Alarm.com, 2GIG Technologies, and Nest Labs. His services are available nationally and internationally. 

Areas of Expertise:

Electronic Security Security Systems Burglar Alarm Systems Intrusion Detection Motion Detection Wireless Alarm Systems Wired Alarm Systems Occupancy Detection Systems Premises Security Residential and Commercial Security Inter Partes Reviews (IPRs)

Research and Development Engineering Management New Product Development Electronic Engineering Embedded Systems Alarm Control Panels PIR (Passive Infra-Red) Motion Detection uW (Microwave) Doppler Motion Detection Solar LED Flood Lights (Patio to Street Level) Patent Litigation Intellectual Property

Background - Mr. Parker is the Past Vice President of Engineering for Digital Security Controls Ltd. (DSC), a leading global manufacturer of electronic security systems and components with sales exceeding $400 million annually. He is currently the President at EE-Systems Group Inc. Canada (R&D) where he is responsible for overseeing new product and business development. A prolific inventor, Mr. Parker has been granted over 25 unique patents with approximately 100 patent documents published worldwide. 

View James Parker's Consulting Profile.

Engel Metallurgical LTD engineers and metallurgists offer laboratory testing services to determine Material Performance and Material Performance Expectation. All tests are performed according to government and/or applicable industrial standards, including ASTM, military, and other specifications.

Engel Metallurgical clients include attorneys, insurance company representatives and members of a broad range of industries, including chemical, agricultural, aviation, power generation, construction, transportation and manufacturing.

Litigation Support - Attorneys requiring reliable information rely on Engel Metallurgical. Les Engel and his team of specialists sort through intricate details of structural and material failures, accidents, manufacturing defects and other unexpected incidents that lead to lawsuits, with involvement from initial discovery through court appearances, if necessary. 

In 2003, Engel Metallurgical earned ISO/IEC 17025 accreditation from the American Association for Laboratory Accreditation (A2LA). This accreditation officially recognizes Engel Metallurgical proficiency in quality and details, and helps ensure that its findings will carry more weight in clients’ litigation cases. 

Engel Metallurgical Ltd. is listed with the Minnesota Association For Justice (formerly Minnesota Trial Lawyers Association) as an expert in the field of metallurgy. Their engineers have extensive experience with deposition and trial. Their high ethical and scientific standards complement our expertise in providing sound, unbiased opinions on technical issues, including: Inspection: Equipment and Components Inspected on Site Failure Analysis:

Root Cause Failure Mode

Photographic Documentation Fracture Evaluations

Product Evaluation:

Quality Control Efforts Reverse Engineering Materials Certification Product Claims, Product Recalls Corrosion Resistance Coatings Selection

Product Replacement Non-destructive Testing Procedures Literature Searches US / Foreign Specifications Equivalents Material Property Design Limits

Principal, Lester P. Engel, Jr., PE, is a Metallurgical Engineer with over 40 years of experience leading the company's detailed, quality-focused testing and services. He oversees the company's lab, continually adding new equipment and techniques. 

Mr. Engel also has experience as the chief metallurgist for Brown Boveri Turbomachinery and as a metallurgical engineer for the Aircraft Engine Group of General Electric, where he focused on material selections for hot aircraft and marine gas turbine components. His GE career began in Nuclear Systems Programs, where his work included serving as the principal investigator on three NASA programs. 

Les Engel specializes in materials application, failure analysis, R & D program management, materials and process specifications, engineering standards and procedures, laboratory design and operation, data analysis and personnel, and budget management. He continues to personally perform failure analysis on aircraft and land turbines, generators, boilers, steel products, metals, cements, plastics, and other materials. With high ethical and scientific standards, Les Engel offers sound, unbiased expert analysis and testimony on technical issues. He provides expertise to insurance companies and counsel representing both plaintiff and defendant.

James A. Brusso, PhD, PE, has more than 20 years of experience in processing/properties of materials, materials characterization and behavior, materials specifications, mechanical testing, failure analysis, machining of materials, and laboratory design and operation. He is also Engel Metallurgical's Technical Manager and Quality Manager.

Dr. Brusso brings keen expertise to Engel Metallurgical and its clients, performing failure analysis; rendering expert opinions, giving depositions and testimony for litigation support; providing technical support for materials and process development and improvement; and developing and reviewing various product designs, materials, and process details.

Dr. Brusso has worked with Engel Metallurgical since 2000. Prior to that, he held several positions with The Timken Company in Ohio, where his responsibilities included establishing the company’s machinability testing laboratory, team leader for product development projects, managing the company's application metallurgical laboratory, and providing technical review of internal processing and testing standards to satisfy ISO 9000 / QS 9000 registration. 

View Engel Metallurgical's Consulting Profile.

• Over 35 years of experience in Mechanical / Structural Engineering & Design, Failure Analysis, Product Liability, Industural Asbestos,Pressure Vessel & Boiler analysis and evaluation of mechanical and structural components.
• Extensive trial experience. Has been involved in multi-million dollar cases. Areas involved included:

  
  

  - Piping & pipe supports - Structural failure of products - Failure analysis - Industrial asbestos - Seismic analysis - Fire protection - Pressure vessels

  - Tanks - Construction - Heat transfer analysis - Environmental qualification of equipment - Welding - Product design - Patent information

• Expertise in developing litigation rate-case exhibits and detailed supporting testimony, and in organizing case documentation into easy-to-use computer databases for trial use.

Vincent A. Ettari, P.E., P.C. specializes in many fields of Civil, Structural, Site, Coastal, Safety & Environmental Engineering, including the Design & Analysis of:

• Structures, Buildings, Houses, Dwellings
• Foundations, Footings, Elevators, Retaining Walls, Dams
• Development Plan & Plats for Sites, Properties, and Residences
• Underground & Subsurface Chamber / Chambers
• Scaffold, Scaffolds, Scaffolding
• Site Plans & Subdivisions: Industrial, Commercial, Residential
• Roads, Roadways, Ramps, Walks, & Man Hole Cover / Covers
• Sidewalks, Walkways, Paths & Pathways
• Lighting: Lamps, Lights, Lamp Poles, Light Levels
• Luminaries & Illumination (Specifications)
• Rock Cuts & Blasting (Topography, Specification)
• Soil Slopes / Samples / Mechanics / Geotechnical Engineers
• Sanitary Facilities, Septic Systems (Board of Health Septics Approval)
• BOHA / DEP Approvals
• Water, Drains, Drainage, Sewer & Sewage Lines & Mains
• Culvert / Culverts, Manholes (Man Holes) & Catchbasins / Catch Basins
• Inspection, Supervision, and Certification of Construction
• House Inspector & Inspections
• Road, Roadway, Walk & Sidewalk Premises Liability (e.g., Steep Slope)
• Walkway, Path, Ramp & Pathway Premise Liability (e.g., Steep Grade)
• Coefficient of Friction / Slip & Fall (Snowy & Icy Conditions)
• Vertical Discontinuity / Discontinuities / Trip & Falls
• Small Ports / Port, Marinas / Marina, Marine Dredging
• Levees, Jetties, Dolphins, Piers, Sea & Flood Walls
• Wharves, Breakwaters, Bulkheads, Weirs, & Revetments
• Groins, Dikes and Waterfront Structures
• Drainage Basin Analysis, Rainfall, Floods & Flood Plain / Plains
• Flooding Controls & Control Devices
• Storm Water Runoff (10, 25, 50 & 100 Year Storms)
• Pressure & Pressures: Wind, Wave / Waves, Ice, Snow
• Rain Fall Run Off & Storm Water Pollution Treatment
• Excavation, Grading, Fills & Filling Operations (Swales, Berms, Silt Fence)
• Erosion Control, Sediment Barriers, Sedimentation / Catch Basins (Hay Bales)
• Pumps and Pump System Line & Main
• Slope, Dam, Levee, Jetty, Dolphin, Pier, Wharf & Breakwater Collapse
• Bulkhead, Weir, Revetment, Groin, Dike, Footing & Foundation Failures
• Failure of Fire Containment Wall, Elevator or Water Front Structure
• Tenement House Façade Collapses
• Code History of Existing Multiple / Multi-Family Dwelling / Building
• Application of Municipal Building, Fire & Property Maintenance Codes
• City, Town & Village Zoning, Planning, Steep Slopes & Grades, Wetland & Wetlands Ordinances
• Testimony at Board Meetings as a Design Forensics Engineer