Peter R. Walsh, PE, is a Licensed Professional Electrical Engineer with over 35 years of experience. He is an NFPA 70E Certified “Electrical Safety Compliance Professional” and OSHA “Authorized Trainer” for General Industry Training.
Background - Mr. Walsh joined General Electric Company early in his career as a Field Engineer. Since then, he has seen many electrical incidents in a variety of roles and companies. He has specialized background with incidents in the proximity of electrical equipment, such as fuses, and provided application assistance for a total of 20 years with the largest fuse companies.
Mr. Walsh has applied electrical products in accordance with National Electrical Code, OSHA regulations, IEEE Standards, and good practices. He has provided technical leadership to electrical industry codes and standards organizations. Presently he is a member of Code Making Panel 10 of the National Electrical Code, which is responsible for Overcurrent and Service Protection. His first appointment to the National Electrical Code was for the 2008 code cycle.
Mr. Walsh served on other NFPA technical committees such as 110 and 111 and also participated in meetings with NFPA 70E committees. NFPA recognizes him as Electrical Safety Compliance Professional. Within IEEE, he has served this Standards Organization so long as to obtain Lifetime Membership. He has written numerous articles about arc flash, arc flash calculations, surge arrestors, and general electrical industry equipment.
Training Services - He focuses on training electrical maintenance people and their management in the latest Safety Standards- NFPA 70E, OSHA General Industry, and the National Electrical Code. Mr. Walsh customizes the courses to client needs, from new general maintenance people to Engineering Managers.
Areas of Expertise:
Auto • Airbag • Bicycle • Boating • Bus • Chair Design / Safety / Failure • Diving and Drowning • Electrocution and Shock • Elevator • Escalator • Fires and Explosions • Forklift • Gate • Golf Cart • Highway Design and Safety • Ladder • Law Enforcement • Lighting & Illumination • Loading Dock • Metallurgy • Motorcycle • Paintgun • Playground Safety • Press • Ramps • Rollercoaster • Safety Guards • Scaffolding • Seatbelts • Slip / Trip and Fall • Spas • Stairs • Swimming Pool Design and Safety • Tractors • Trailers • Trucks • 3D Scans
John E. Averrett‚ PE, LEED AP - A Licensed Professional Engineer in 11 states, John Averrett specializes in electrical shock/electrocution and lightning damage cases involving death, personal injury, utilities, industrial equipment failure, vehicular accidents, fire cause/origin, contract, and construction disputes.
Areas of practice include: Alabama, Florida, Georgia, Mississippi, Tennessee, South Carolina, North Carolina, Kentucky, Arkansas, Louisiana, and Texas; other states by comity.
John Averrett is Executive Vice President of Goodwyn Mills & Cawood headquartered in Montgomery, AL. He has more than 24 years' experience in plan development for municipal, industrial, commercial and residential clients. Mr. Averrett is a recognized expert in the electric utility and distribution/transmission industry and coordinates a group of over a dozen other electrical engineers and designers. He also acts as a consultant to several electrical contractors to facilitate their arc flash safety programs.
Litigation Support - Mr. Averrett offers expert witness services to attorneys representing plaintiff and defendant. He provides site review, thorough reporting, deposition, and trial testimony as needed nationwide.
Fire & Risk Engineering provides Fire Protection and Risk Management solutions for projects involving industrial, commercial, institutional, mercantile, transportation, educational, residential, and complex public facilities. They apply scientific laws to fire analyses in order to form a solid foundation for indisputable arguments. In addition, Fire & Risk Engineering provides the experience to identify, interpret and explain the relevant codes, standards, regulations and industry practice that affect the determination of responsibility.
Robert Malanga, P.E., holds degrees in Fire Protection Engineering as well as in Technology Management and the Electrical/Electronic field. For over 28 years, Mr. Malanga has dedicated his career and avocations to Fire Protection, Life Safety and Risk Management. As a result, he is experienced in analyzing the development and spread of Fires and Explosions as well as evaluating the design and performance of fire protection systems. He has provided expert testimony on the subjects of fire and explosion phenomena; cause and origin; fire behavior, spread and development; design, adequacy and performance of public/private fire protection systems; fire prevention; fire protection and building codes; fire resistant construction and fire safe building design.
Electrical Safety Group Inc. provides consulting services in Occupational Electrical Safety for matters critical to electrical safety, including:
Partner and Principal Consultant, H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries.
Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. For more than 35 years, Mr. Floyd has focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program.
Author / Speaker - Actively involved in professional organizations spanning electrical engineering, occupational health and safety, and maintenance and reliability, Mr. Floyd has authored or co-authored more than 70 papers and articles and has given more than 150 presentations at conferences, seminars and webcasts in his work to advance the practice of electrical safety. He has been an invited speaker on electrical safety in Australia, China, Brazil, Western Europe, and throughout North America.
Brosz & Associates are Electrical Experts headed by President and C.E.O., Professor Helmut G. Brosz, B.A.Sc., D.B.A., F.A.A.F.S., P. ENG., Adjunct Professor at Ryerson University, Adjunct Assistant Professor at University of Toronto. They provide a wide range of highly specialized Forensic Science and Engineering, Accident Reconstruction, Testing, Commissioning, and Technical and Scientific Services.
Brosz & Associates staff of specialists and experts have completed over 5,200 assignments since 1970 ranging from electrical accidents and electrocutions to electrical power system investigation and testing of equipment failures including circuit breakers, motors, switchgear, generators, transformers and appliances. Their engineering facilities allow them to perform in-depth research, electrical testing, forensic laboratory testing, microscopy, macro photography and photographic documentation, X-Ray testing, infrared testing, high voltage testing, high current testing and more. Most of their testing equipment is portable and they are also capable of producing professional collages and scale models for reports, mediations, depositions and trial. Clients include insurance companies, legal firms, adjusters, risk managers, manufacturers, contractors, utilities, governments and individuals.
Kenneth J. Shorter, MS, CSP, ARM, TCDS, is the President of Accident Prevention & Investigation, Inc., a professional corporation set up to provide Safety Consulting Services, management evaluations, accident investigation, training, and forensic services. Mr. Shorter has over 30 years of experience Managing Safety for local, regional, and national organizations in the fields of construction, general industry, fleet, government, and marine operations.
Mr. Shorter has his Masters Degree in Safety and Professional Certifications in Safety, Risk Management, and Traffic Control Design. An ANSI A10 Standards Committee Member for Construction and Demolition Operations, Mr. Shorter has extensive experience managing safety on large projects constructing buildings, roadways, rapid transit systems, tunnels, bridges, hospitals, etc.
Consulting Services Include: