1 Source Safety and Health, Inc. is a Safety and Health Management and Consulting firm for educational, insurance, commercial, residential, research, healthcare, and manufacturing facilities. 1Source’s team of professionals includes certified industrial hygienists, certified safety professionals, certified professional environmental auditors, and a certified professional ergonomist who can address every safety and health issue. One key measure of their success is that 1Source is the largest safety and health consulting firm with the most certified staff on the east coast. For more than 20 years, the professionals at 1Source have been committed to developing long-term, mutually beneficial professional relationships with our clients and business partners. Indoor Air Quality Management and Consultation:
Safety Management Systems:
Asbestos and Lead Management and Consultation:
Dr. C.J. Abraham, P.E. is a Certified Professional Chemical Engineer with over thirty five years of international experience consulting to insurance companies, municipalities, government agencies, and the legal profession. He provides consultation to International corporations in the areas of New Product Development, Manufacturing, Packaging, Warnings and Instructions.
Dr Abraham's services include Expert Witness Testimony for both Plaintiff and Defense in matters involving Personal Injury and Product Liability.
Areas of Expertise:
Kenneth J. Shorter, MS, CSP, ARM, TCDS, is the President of Accident Prevention & Investigation, Inc., a professional corporation set up to provide Safety Consulting Services, management evaluations, accident investigation, training, and forensic services. Mr. Shorter has over 30 years of experience Managing Safety for local, regional, and national organizations in the fields of construction, general industry, fleet, government, and marine operations.
Mr. Shorter has his Masters Degree in Safety and Professional Certifications in Safety, Risk Management, and Traffic Control Design. An ANSI A10 Standards Committee Member for Construction and Demolition Operations, Mr. Shorter has extensive experience managing safety on large projects constructing buildings, roadways, rapid transit systems, tunnels, bridges, hospitals, etc.
Consulting Services Include:
|Investigative Engineering||Preventive Engineering|
|Safety / Ergonomics||Consulting Engineering|
Atlantic Environmental Inc. has provided expert services on Environmental, Health and Safety issues for the past 40 years. We translate highly technical, scientific information into real and practical terms to assist attorneys in providing the best legal advice and direction in litigation issues involving chemical and environmental issues. We have substantial experience in appearing for deposition and trial as an expert witness
Areas of Expertise:
Robert E. Sheriff, MS, CIH, CSP is the CEO and President of Atlantic Environmental Inc which he founded in 1978.. He earned his MS in Preventative Medicine and Environmental Health and his BS in Zoology. Mr. Sheriff was a former Manager of Health Safety & Environmental for Sun Chemical Corporation and an Industrial Hygienist and Loss Control Rep. for Continental Insurance Co. He served in the US Army - Vietnam Era. He is a Past-President of the American Industrial Hygiene Association(AIHA) He has acted as Expert Witness in Asbestos Personal Injury Litigation(Defense), Industrial Hygiene, Occupational Disease, and Indoor Air Quality/Mold over the last 25 years.
Henry P. Shotwell, Ph.D., CIH is the Senior Consultant of Atlantic Environmental Inc. He earned a Ph.D. in Systems Safety Engineering, an MS in Biomedical Sciences and a BS in Biology & Chemistry. Dr. Shotwell is a former Director, IH & Safety for Environmental Waste Management Associates and a former Manager of Health & Environmental Safety for Sun Chemical. He has acted as Expert Witness in a variety of Industrial Hygiene, Mold, and Toxic Tort cases as both plaintiff and defense expert.
Dr. Randall Atlas AIA , CPP is a Registered Architect, NCARB certified, and he practices Criminal Justice Architecture and Environmental Security Design. Atlas is a certified protection professional (CPP) with the American Society of Industrial Security (ASIS), and is an appointed member of the ASIS Security Architecture and Engineering Committee. Atlas has his doctorate in criminology and a masters of architecture. Dr Atlas is a member of the American Institute of Architects (AIA) Architecture for Justice Committee.
Dr. Atlas has taught CPTED (Crime Prevention through Environmental Design) and criminal justice courses at Florida International University, Florida Atlantic University, and the University of Miami, Keiser University, and he is a trainer with the National Crime Prevention Institute at the University of Louisville. Dr. Atlas has been a technical Assistance consultant with the National Institute of Justice, National Institute of Corrections, and the Florida Department of Corrections and U.S. HUD Drug Elimination CPTED Program.
He has conducted ADA accessibility compliance audits for private and public sector clients, and served as an expert witness on over 200 premises liability lawsuits.
Dr. Atlas has been a speaker and trainer at security conferences from New Delhi, India to Seattle, Washington and has written over 200 articles in various publications on security, safety, and counter terrorism issues.
Electrical Safety Group Inc. provides consulting services in Occupational Electrical Safety for matters critical to electrical safety, including:
Partner and Principal Consultant, H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries.
Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. For more than 35 years, Mr. Floyd has focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program.
Author / Speaker - Actively involved in professional organizations spanning electrical engineering, occupational health and safety, and maintenance and reliability, Mr. Floyd has authored or co-authored more than 70 papers and articles and has given more than 150 presentations at conferences, seminars and webcasts in his work to advance the practice of electrical safety. He has been an invited speaker on electrical safety in Australia, China, Brazil, Western Europe, and throughout North America.
Frederick Heath has over 40 years personal experience in management, consulting and expert services in the fields of design, manufacturing, testing of hydraulic, pneumatic and electro-mechanical lifting and load bearing machines, equipment and devices.
Industry Experience includes automotive, construction, industrial, material handling, warehousing and transportation.
Forensic Engineering includes product liability, accident investigation, reconstruction and expert testimony,
Incidents involves industrial trucks, aerial work platforms, forklifts, telehandlers, tuggers, pallet jacks, automatic storage and retrieval systems, dock boards, dock levelers, trailer restraints, trailer jacks, racks, conveyors, overhead bridge cranes, trucks, shop cranes, scissors lifts, shop cranes, automatic doors and lift gates.
Heavy Equipment involves telehandlers, powered industrial trucks, automatic storage and retrieval systems, gantry cranes, truck cranes, tower cranes, cranes with hydraulic booms, cranes with lattice booms, grapple and magnet equipped excavators, and side boom cranes.
Conformity issues involves environmental, health and safety, warnings, instructions, training conformity with recognized standards, codes, industry practices and government regulations.