Industrial Engineering Consultants: 9

William R. Acorn is founder of Acorn Consulting Services, LLC, an engineering firm. As a consulting mechanical engineer, Bill provides project analysis, forensic reconstructions and litigation support services relating to the design, delivery, and functioning of high-tech manufacturing facilities, semiconductor fabrication facilities, institutional laboratories, data centers, health care facilities and a variety of commercial buildings. He is a recognized expert in the evaluation of deficiencies in HVAC systems, cleanrooms, piping systems, refrigeration systems, construction defects, building and fire code compliance, and patent and trade secret disputes. He represents both plaintiffs and defendants.

Bill has more than 40 years of experience as a professional engineer and is a recognized expert in assessing, evaluating, remediating and providing testimony on complex project design, construction and operational matters. His consulting expertise has been influential in shaping approaches to code compliance and life safety in semiconductor and similar advanced technology facilities.

Certifications and Designations:

• Registered as a Professional Mechanical Engineer in the States of Arizona, California, Colorado, Illinois, Iowa, Nevada, New Hampshire, New Mexico, Oregon, Texas, Utah and Washington.
• Registered with the National Council of Examiners for Engineering and Surveying NCEES (Certificate No. 6999)
• Fellow in the HVAC industry leading organization ASHRAE
• Visiting lecturer at the Arizona State University Del E. Webb School of Construction in Tempe, AZ
• Advisor to CREATE, ACE – Alliance for Construction Excellence and the IAB – Industry Advisory Board, all affiliated with ASU

Building Systems Analysis:

Litigation Support: Bill’s pragmatic approach to both forensic and litigation consulting as well as project consulting is based on more than 40 years of real-world experience as a design professional, mentor and forensic analyst, as well as many years as an instructor in professional and academic settings. Represented both plaintiffs and defendants in a variety of jurisdictions throughout the US and Asia. Bill’s ability to explain complex issues to non-technical audiences, including juries, mediators and judges, is a key to successfully solving your litigation challenges.

• Forensic Analysis
• Strategic Litigation Consulting
• Trial Demonstratives
• Expert Testimony

Acorn Consulting Services

Consulting Services: Services range from peer review to conceptual design to development of strategies and programs for expedited project delivery.

Bill frequently acts as an owner’s agent and mentor, functioning as an extension of the owner’s project team. On other projects, Bill serves as a subject matter expert assisting project delivery firms in their development of viable solutions and review of construction documents.

As a project consultant, Bill assures the project gets off to the right start and provides his expertise through completion and operation to maximize return on investment.

Consulting Expertise Includes:

• Project Design and Management Consulting
• Forensic Analysis and Litigation Consulting
• Mentoring & Advanced Education

David Smith is an experienced mechanical engineer (MS, PE) with seven issued patents. Award-winning inventor. Vice President of Alpine Engineering and Design, a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, thrill rides, ziplines, trailers, oil and gas equipment, exercise equipment, manufacturing equipment, and multiple consumer products. 

Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain, and counterbalanced forklifts. Over 10 years of experience in product development, patents, equipment safety, and risk assessments. 

Experienced expert witness having drafted over 200 reports/declarations in patent cases and catastrophic injury and death cases. Designed and built multiple custom testing devices to obtain data and evaluate opinions. Created multiple demonstratives to explain the mechanics and circumstances of accident sequences and patented devices. Testified in deposition 11 times and in trial once.

Summary

Stephen (Steve) T. Hopper, PE, is Founder and Principal of Inviscid Consulting. Over more than three decades, Steve has helped hundreds of clients plan and streamline their warehousing, logistics, manufacturing, and distribution operations by driving down operating costs, boosting capacity, improving service levels, mitigating risk, implementing effective supply chain solutions, emphasizing safety, and enhancing the performance of their supply chain resources: people, processes, inventory, facilities, equipment, material handling systems, transportation assets, and supply chain information technology (IT). He has worked with clients ranging from small businesses to Fortune 100 corporations.

Steve earned a Bachelor of Industrial Engineering (BIE) degree from The Georgia Institute of Technology (Georgia Tech) and is a board-certified, licensed, registered Professional Engineer (PE). He has served as an expert witness on dozens of cases involving supply chain operations in the US, Canada, and Australia and has advised private equity and venture capital investors. He has also been interviewed by the supply chain industry media, authored articles for industry publications, and spoken at industry events.

Industry Experience

• 3PL / Outsourced distribution and fulfillment
• Apparel / Footwear
• Building materials
• Consumer goods
• Direct-to-consumer / Ecommerce / Catalog
• Food / Beverage / Grocery
• Furniture
• High-tech / Electronics
• Industrial / Automotive / Aerospace
• Mining / Drilling
• Pharmaceutical / Health and life sciences
• Rentals
• Retail
• Reverse logistics / Returns
• Wholesale / General distribution

Supply Chain Solutions Expertise

• Warehouse management systems (WMS)
• Warehouse control systems (WCS)
• Warehouse execution systems (WES)
• Slotting and order picking systems
• Transportation management systems (TMS)
• Labor management systems (LMS) 
• Order management systems (OMS)
• Voice and automatic identification systems
• Equipment, automation, robotics, and software used for handling, packaging, storing, and transporting materials
• Logistics network design & optimization software tools

Education, Certifications, and Associations

• Bachelor of Industrial Engineering (BIE), The Georgia Institute of Technology (Georgia Tech)
• Board-certified, licensed, registered Professional Engineer (PE)

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine.  We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects.  Mr. Carter is proficient in the use of Primavera P6 and P3 software, and he has extensive experience in assessing the impact to engineering and construction works of RFIs, change orders and other events.  Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

John L. Ryan, BSME, P.E. of Mechanical and Safety Engineering (MASE), is a Mechanical Engineer who provides general and specialized Mechanical and Structural, and Design Engineering Consultation Services. He is knowledgeable and dedicated to increasing the efficiency of the manufacturing process by reducing material costs and trimming unnecessary material while ensuring structural integrity. 

Mr. Ryan's Engineering services include the designing of pressure vessels, buildings, HVAC systems, and mechanical machine components. He is available to perform accident reconstruction, identify product defects, guard machine hazards, develop product warnings, do destructive and nondestructive testing, and design and construct factory automation robotic machines. 

John L. Ryan is a noted author in his field of expertise having published 8 books and written several Safety Engineering articles. MASE has branches in Arkansas and Michigan, and also provides engineering expertise to clients located around the country. 

Consulting Specialties:

• Finite Element Analysis
• Product Development
• Factory Automation
• Industrial Safety
• Alternative Energy Engineering
• Industrial safety
• Structural Engineering
• Safe Use Training for Personnel

View John Ryan's Expert Witness Profile.

Overhead Crane Consults, LLC, is an overhead crane consulting company. Although they do not build cranes or have any affiliation with crane builders, they help level the playing field between an inexperienced buyer and a very experienced seller. Overhead Crane Consults has extensive experience with Overhead Bridge Cranes, Gantry Cranes, Jib Cranes, Hoists, Monorails, and Crane Runway Systems. Services Include:

• Custom Crane Specification Writing
• Custom Crane Safety Programs
• Expert Witness Services

D. Larry Dunville has over 35 years of Overhead Crane experience. Mr. Dunville has built, installed, engineered, estimated, sold and serviced overhead bridge cranes. He has sat on the industry committees that wrote the crane specs for the steel industry, written articles, and taught professional architects and engineers about the special requirements to be aware of when designing buildings that will house overhead cranes. 

D. Larry Dunville's Video Introduction

In the early 90s, Mr. Dunville led the effort to become one of the first crane builders in the US to attain ISO9001 certification, which led directly to Dearborn Crane and Engineering winning the Indiana Governor's Quest For Excellence Award and the Indiana University Kelly School of Business Growth 100 two consecutive years. 

Business Experience - Mr. Dunville served as the Owner/President of Dearborn Crane & Engineering Co., a builder and installer of overhead cranes and crane runway systems, from 1975-2012. Mr. Dunville is the Owner/President of Digital Industrial Marketing, LLC (2014 to present) and Overhead Crane Consulting, LLC (2016 to present). Dennis Dunville is a regular public speaker for training sessions to professional and trade groups. He taught the overhead crane portion of the OSHA 10 & 30 hour course for the Northern Indiana NIOSHA office and overhead crane design classes to dozens of architects, engineers, and contracting firms. Mr. Dunville is a member of the AISE/AIST committee's #6 & #13 that wrote the overhead crane specs and the specs for metal buildings with cranes, for the US Steel industry and currently publishes crane installation, crane safety, and crane control articles for industry trade journals.

Larry is the former Executive Director of the Crane Certification Association of America and a member of the ASME/ANSI B30.2 Overhead and Gantry Cranes Committee, ASME/ANSI B30.16 Overhead Hoists, and ASME/ANSI B30.17 Overhead Cranes, Under Running , which writes the overhead crane safety specs for the US crane industry.

View D. Larry Dunville's Expert Witness Profile.

Page Engineering Inc., established in 1994, is an Ergonomics and Industrial Engineering consulting firm. They have provided services to clients throughout the United States and Canada. Their hands-on approach is backed by the extensive application of ergonomics, human factors, epidemiologic, and occupational medical scientific literature. Page Engineering experience includes conducting ergonomics analyses and research in the railroad industry, primarily, and in heavy industry, in general, for over 22 years. Their clients include Union Pacific Railroad, Kansas City Southern Railways, Association of American Railroads, Fedex, American Petroleum Institute, Food Marketing Institute, Food Distributors International, Blue Water Bridge Authority, and USPS.

Consulting Services - Page Engineering provides ergonomics services, integrating multiple disciplines (industrial engineering, safety, health, business, regulatory) to provide effective results, whether in the application of job analyses and job improvement processes or in physical job demands analyses. Their services include:

• Ergonomics Exposure Analysis and Workplace Improvements
• Ergonomics Design
• Organizational Risk Analysis
• Health and Safety Information Systems Development
• Expert Witness Services

George B. Page, CPE, is a Certified Professional Ergonomist. Since founding Page Engineering, Mr. Page has been providing ergonomics services, integrating multiple disciplines (industrial engineering, safety, health, business, regulatory) to provide effective results, whether in the application of job analyses and job improvement processes or in physical job demands analyses. His experience includes conducting ergonomics analyses and research in the railroad industry and in heavy industry for over 30 years. Mr. Page's expertise includes job exposure assessments, physical demands assessments, accident reconstruction, and forensic engineering.

Greg G. Weames, CPE, CCPE, CRSP, has been a practicing Ergonomist since 1994, after obtaining his B.Sc. and M.Sc. in kinesiology. Mr. Weames has spent several years as a corporate ergonomist for large organizations as well as has worked for several years in consulting. Currently, with Page Engineering, Inc., he has provided expert witness services, consulting services for various facilities projects, workplace, equipment, machine and tool analysis services, and job exposure analysis services. Over his years as an ergonomist, Mr. Weames has co-authored scientific publications, served on Federal, Industry, and Corporate level committees, developed and authored corporate programs and training, and has worked extensively across all departments of organizations, levels of management and employees.

Stephen D. Fleming, CPE, CXLT, is an Industrial Engineer / Ergonomist whose background includes analyzing work environments and work tasks using industrial engineering work measurement methods and risk assessment models for different body regions. His expertise is in assisting industrial clients in applying ergonomics to workplace processes, tools, and equipment, including all major North American railroads, FedEx, Ford Motor Company, Lear Seating, USPS, and the Blue Water Bridge Authority. Mr. Fleming has been acknowledged for developing and implementing a methodology for measuring and analyzing exposure to whole-body vibration (WBV) and hand-arm vibration (HAV).

View Page Engineering's Expert Witness Profile.

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Our locations include Tallahassee, FL; Jacksonville, FL; Tampa, FL; New Orleans, LA; San Diego, CA; and Tucson, AZ.

Traci K. Campbell, PE, CFSE, CXLT, has over 23 years of experience investigating, analyzing, and testifying in matters involving a variety of forensic engineering issues. She is an expert in the following: industrial accident reconstruction and human factors; slip, trip, stumble and fall analysis; application of standards, codes, and guidelines including OSHA, ANSI, ASTM, Life Safety, ADA, NFSI, and Building Codes; workplace safety related issues; forklift and material handling devices; construction machinery and workplaces; manufacturing equipment; and the analysis of workplace systems and product failures. Ms. Campbell has a strong background working in manufacturing and industrial workplaces including the design, development, and implementation of solutions to ensure safe work environments. She has also been credited as part of a team holding a patent related to safeguarding power hand tools with rotating discs. 

Ms. Campbell's special interests include amusement park and theme park accidents and safety related issues. She is also a CFSE – Certified Forensic Slip Expert, CXLT – Certified XL Tribometrist (slip index evaluation) and a certified counter balance forklift operator. Ms. Campbell has served as a presenter with the American Society of Safety Professionals (ASSP) regarding slip, trip, stumble, and fall incidents. She has shared her engineering expertise with many organizations on topics including: slip, trip, stumble, and fall incidents; electronic data in the realm of accident reconstruction; safety engineering and the engineering hierarchy; photogrammetry and other accident reconstruction techniques; OSHA compliance; and Industrial Engineering. 

Ms. Campbell is a registered and licensed Professional Engineer in five states and she continues to refine her skills and knowledge of premises liability and safety engineering by staying current with new technology and best practices.

See Full Bio & CV.

Expertise:

Brian A. Darr, P.E. IAAI-FIT(V), CFEI, has over 25 years of engineering experience which includes Tire Failure analysis on many types of tires (passenger, light truck, radial medium truck, retreads, motorcycle, etc.), Vehicle and Residential Fire Origin and Cause investigations, vehicle accident reconstruction for passenger and commercial vehicles, motorcycles, vehicle component failure analysis, and insurance fraud/consistency evaluations. He also conducts crash data retrieval (CDR) downloads for passenger vehicles and engine control module (ECM) downloads for commercial vehicles. Mr. Darr evaluates traffic signal timing relating to intersection collisions. He provides services in product and material failure analysis, cause analysis of plumbing failures, mechanical equipment and machinery failures, lightning strike investigations, nondestructive examinations and testing, product design and assessment of conformance to government, corporate, industry, safety, and international standards.

Mr. Darr has over 25 years of extensive experience with tires including design, development, manufacturing, quality investigation, race tire preparation, and testing of tires at numerous testing facilities. He worked in a tire manufacturing facility as a plant technical engineer where he investigated quality related issues, and in a Research & Development (R & D) center where he designed, developed, tested, and analyzed tires. Mr. Darr has visited numerous tire production plants such as Goodyear, Bridgestone, Michelin, and Continental tire. He has inherent knowledge of the PAX run-flat tire system and C3M manufacturing process. He also was responsible for verifying standards and regulations were met, related to tire product and tire pressure monitoring sensors.

Mr. Darr has been qualified as a tire expert in State and Federal court. He has completed forensic tire failure analysis on many types of tires in which he referenced hundreds of publicly available tire related documents. He reviews forensic tire reports from outlying offices along with providing marketing support and giving seminars nationwide. He has conducted numerous vehicle and residential fire origin and cause investigations with various findings including fires that were intentionally set, accidental, and electrical in nature. He has also conducted fire suppression system investigations. 

Mr. Darr holds multiple fire certifications and designations with the International Association of Arson Investigators and the National Association of Fire Investigators. 

See Full Bio & CV.

Expertise:

View Quality Forensic Engineering's Accident Reconstruction Consulting Profile.