Electrical Engineering Consultants: 18

Michael Nranian, JD, MBA, MS has over 30 years experience focusing in Product Development, Intellectual Property, Patent Litigation, Legal and Technical Compliance, and Product Liability Litigation. He is a licensed attorney in Michigan, Texas, & the United States Patent and Trademark Office. Mr. Nranian is a Six Sigma Black Belt, Professional Engineer, & Certified Project Management Professional. He has an in-depth background and education in Law, IP, Electrical, Chemical & Computer Engineering, & Business. He has testified extensively as an expert witness in depositions, hearings, and trials in state & federal courts.

Mr. Nranian conducts Product and Technology Analysis, Patentability & Prior Art Research,and provides Technology & Litigation Support for Intellectual Property. His litigation background includes patent infringement / non-infringement under literal infringement and the doctrine of equivalents, patent validity / invalidity, prior art, & file-wrapper estoppel, for both ITC and Federal cases, including Inter Partes reviews. He conducts analysis of patents and products, prepares claim charts, & expert witness reports. This includes testimony and document preparation for cases before state, and federal court jurisdictions, and the International Trade Commission and the Patent Trial and Appeal Board.

Mr. Nranian is thoroughly familiar with all 101, 102, 103, 112, and other enablement and prior art arguments. His experience includes Technology Standards Boards and Licensing Authorities, Antitrust / DOJ, Technology Development and Transfer, Patents, Trademarks, Trade Secrets, and Copyrights, Licensing, Unfair Competition/Trade, False/Deceptive Advertising, & Lanham Act Actions, & Class Actions.

His Product Liability Expert Witness litigation background includes all types of Safety Systems, Electrical Systems, Fires, Accident Reconstruction, and Evaluation of Alternative Designs for Automotive, Medical and other industries. He has over 29 years of experience in Automotive Safety Systems, Sensors, Seatbelts, Airbags / Curtains, Seats, Diagnostic Systems, Crash Recorders, Crash Pulse Analysis, System Diagnostic, Fault Codes, Structure (including roof-crush and door) and front, side & roll-over systems (including sensing and algorithm development) for domestic and international corporations. He is thoroughly familiar with all regulatory (including FMVSS), and corporate due-care requirements, & preemption arguments, occupant kinematics, & injury causation.

Burtness Engineering Services, is a multi-disciplined consulting engineering firm serving municipal, institutional, industrial, and commercial end user clients, civil engineering firms, and landscape architectural firms with MEP services for the construction industry. They specialize in Street and Area Lighting Design, Electrical Engineering, and Forensic Engineering services.

Consulting Services Include:

• Illumination Engineering for Roadway, Street, and Area Lighting
• Electrical Engineering (Through 15kv)
• Monitoring and Control Systems for Street and Area Lighting
• Full Range of MEP Services
• Industrial Instrumentation and Control Systems
• Stakeholder Based Collaborative Design Philosophy
• Focusing on the Marriage of the Art of Aesthetic Design and the Science of Technical Engineering
• Serving as a Prime or a Sub Consultant
• Forensic Consulting and Expert Witness Services

Principal, Thomas H. Burtness, PE, is an Electrical Engineer specializing in both Electrical and Building Construction - equipment selection, specification, and installation (actually “working with the tools”), as well as cost control techniques.

Background - Mr. Burtness has 40+ years of experience in the design, specification, construction contract administration, installation, startup, and troubleshooting of electrical power, on-site generation, distribution, control, and instrumentation systems and equipment for residential, commercial, industrial, and municipal occupancies. His experience also includes water, wastewater, and stormwater treatment plants, and military facilities.

Additional expertise includes Illumination Engineering for street, roadway, and area lighting including photometric footcandle requirements, calculations, field verification, equipment specifications, installation, and analysis of failure, glare, overlighting and underlighting.

Thomas Burtness has written numerous in-depth reports, including municipal master planning documents, as well as operation, maintenance, and testing manuals. He also has extensive experience in public speaking and teaching.

View Thomas Burtness' Expert Witness Profile.

DireenTech is a Design and Systems Development firm in the Electronics and Software Industry. They are currently under contract with the US Air Force Academy Center for UAS Research, Department of Electrical and Computer Engineering in the area of using General Purpose Graphics Processing Units (GPGPU) in UAVs / Drones to provide fast autonomous target identification and GPS denied navigation. DireenTech has also partnered with FalconWorks and Falci Adaptive Motor sports on the NeuroGroove program to develop technologies to help those with neuromotor disabilities, including U.S. veterans, increase their ability to control and interact with their environment.

Core Services

• Software Design and Development
• Electronic Hardware Design and Development
• Research using GPGPUs for Control, Navigation and Image Processing
• Intellectual Property
• Reverse Engineering Hardware, Software, and Firmware
• Product Forensics

Chief Operating officer, Harry Direen, PhD, PE has over 30 years of experience as an engineer Designing and Developing Systems in the Electronics and Software Industry. He has taught engineering courses at the US Air Force Academy and at the University of Colorado. Dr. Direen currently works with a research group at the US Air Force Academy developing control systems and image processing using GPGPUs for UAVs. An inventor, he holds 3 United States patents. Dr. Direen has a broad base of knowledge in electronic and software systems gained from a long career developing a wide range of products and systems. He has reverse engineered a variety of complex systems over the years, including: media players, modems, modem compression algorithms, coriolis mass flow meters, database systems, and a range of other products to support patent infringement cases generating detailed claim charts and writing expert reports to demonstrate infringement. Dr. Direen has successfully discovered and analyzed complex digital signal processing algorithms and pertinent operations within these products for many years.

View Dr. Direen's Expert Witness Profile.

Discovery Engineering is a private Engineering Firm based in Boulder, Colorado, performing investigations into Electrical, Electronic, and Communications Systems.  Discovery Engineering also works with management to analyze risk, improve quality, and understand variability processes.  Clients include industrial, commercial, research, legal, government, and private entities.

Mark McFarland, PE, Founder & CEO, is an Licensed Engineer and Statistician with over 25 years of extensive education and experience in applied statistics, statistical learning, artificial intelligence, electrical engineering, and communications. His practical experience includes the design, analysis, and testing of satellite, cellular, LTE, Internet, wireless, Wi-Fi, RADAR, networks, data communications, communication protocols, standards, public safety communications systems, GPS, instrumentation, and control systems. 

Mr. McFarland understands variability is crucial to improving and controlling processes.  He brings scholarship and practical experience in Statistics and Applied Research to help clients understand variability and improve outcomes.

Applied Research and Analytics Consulting Services:

Data Mining, Inference, and Prediction Quality Improvement and Control Risk Analysis Root Cause Analysis

Research Methods Experimental Design Statistical Engineering Electrical Investigations

View Mark McFarland's Expert Witness Profile.

Electrical Safety Group Inc. provides consulting services in Occupational Electrical Safety for matters critical to electrical safety, including:

• Codes
• Standards
• Regulations
• Safe Work Practices
• Management Systems
• Inherently Safer Designs
• Reliability

Click here for my current CV

Partner and Principal Consultant, H. Landis “Lanny” Floyd II, PE, CSP, CMRP, CRL, CESCP, Life Fellow IEEE, has over 45 years of experience in Electrical Safety in the Workplace. His work has advanced the application of Human Factors Engineering, Electrical Technology, and Safety Management Systems in preventing occupational electrical injuries. 

Mr. Floyd retired from DuPont in 2014, holding the positions of Principal Consultant - Electrical Safety & Technology, and Global Electrical Safety Competency Leader. For more than 35 years, Mr. Floyd has focused on electrical safety in the construction, operation, and maintenance of industrial and commercial facilities. This included safety management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance. From 1992 to 2014, he led the team that designed and facilitated implementation of a strategy for continuous and sustainable improvement in occupational electrical safety for DuPont Global Operations. This work enabled breakthrough performance in prevention of serious injuries and fatalities from electrical energy in DuPont facilities worldwide. In 2013, Mr. Floyd was invited to join the faculty at the University of Alabama at Birmingham, where he teaches in the Advanced Safety Engineering and Management Master of Engineering degree program. 

Author / Speaker - Actively involved in professional organizations spanning electrical engineering, occupational health and safety, and maintenance and reliability, Mr. Floyd has authored or co-authored more than 70 papers and articles and has given more than 150 presentations at conferences, seminars and webcasts in his work to advance the practice of electrical safety. He has been an invited speaker on electrical safety in Australia, China, Brazil, Western Europe, and throughout North America. 

View Lanny Floyd's Expert Witness Profile.

James Parker has over 35 years of relevant industry experience specializing in Electronic Security Systems & Sensors, Electronics R&D and New Product Development. With executive and strategic leadership skills, Mr. Parker served as a principal product architect, is highly credible with customers, distributors, and suppliers. He is a prolific inventor having been granted over 24 unique patents with approximately 80 patent documents published worldwide. Mr. Parker is the Past Vice President of Engineering for Digital Security Controls Ltd. (DSC), a leading global manufacturer of electronic security systems and components with sales exceeding $400 million annually. He is currently the President at EE-Systems Group Inc. Canada (R&D) where he is responsible for overseeing new product and business development. 

Consulting Services - Mr. Parker's consulting services include identifying patent filing opportunities while avoiding infringement risks. He has in-depth knowledge of electronic product design in both Wired and Wireless Technologies and outstanding knowledge of Environmental and False Alarm Immunity. 

Mr. Parker also has expertise in the research, development, design, and manufacturing of electronic based products such as Security Systems, Burglar Alarm Systems, Intrusion Detection Systems, Occupancy Detection Systems, Fresnel and Mirror Optic PIR (Passive Infra-Red) Motion Detectors, Microwave Doppler Motion Detectors, Solar Powered, Motion Controlled, LED illumination Systems, and similar devices. 

View James Parker's Expert Witness Profile.

A Licensed Professional Engineer in 21 states, John Averrett specializes in Electrical Shock / Electrocution, Utilities, Arc Flash, Lightning Strikes, and Grounding cases involving death, personal injury, industrial equipment failure, vehicular accidents, fire cause/origin, contract, and construction disputes. 

Areas of practice include: Alabama, Florida, Georgia, Mississippi, Tennessee, South Carolina, Texas, North Carolina, Louisiana, Kentucky, Arkansas, Virginia, Oklahoma, Missouri, West Virginia, Illinois, Ohio, Indiana, Maryland, Kansas, Delaware, and Wisconsin; other states by comity as needed through NCEES.

John Averrett is Executive Vice President of Goodwyn Mills & Cawood headquartered in Montgomery, AL. He has more than 25 years experience in plan development for governmental, municipal, industrial and commercial clients and is currently coordinating a group of twelve other electrical engineers and designers. In addition to his design efforts, Mr. Averrett's experience includes work with electric utilities that includes transmission, sub-stations, and distribution; work with investigating lightning strikes; work with investigating grounding insufficiencies; and work analyzing and providing solutions for arc flash hazards.

Litigation Support - Mr. Averrett offers expert witness services to attorneys representing plaintiff and defendant. He provides site review, thorough reporting, deposition, and trial testimony as needed nationwide.

Electrical Engineering Electrocution Lightning Lightning Protection Arc Flash Electrical Safety

Building Analysis Grounding Shock Electric Shock Drowning Breaker Coordination Electrical Utility Distribution

Isaak Technologies provides expert witness, consulting & training services in the areas of design, construction, procurement, implementation, commissioning and operations of information technology, telecommunications, network systems and critical data center facilities. Isaak Technologies provides clear solutions to complex challenges using best-practice forecasting, strategy & risk mitigation. 

Philip J. Isaak, PE, P.Eng., DCDC, RCDD, SMIEEE, has over 20 years of experience as a design & operations consultant & training provider, with a focus in the information technology, telecommunications & critical data center facility industries. 

In recognition of Mr. Isaak’s professional standing, the Officers & Board of Directors of the Institute of Electrical & Electronic Engineers (IEEE), the world’s largest professional association for advancement of technology, certified his election to the grade of Senior Member, a level only 9% of IEEE’s over 400,000 global members hold. 

Professional Services:

Litigation	IT & Telecommunications	Critical Facilities
IP, Trade Secrets, Contracts Design, Construction, Implementation Claims, Damages, Defects, Delays, Failure & Quality Control Analysis Failed System Analysis Unfulfilled SLAs Technical Investigations Claims Preparation & Analysis Expert Reports Settlement Opinions & Strategies Deposition & Trail Testimony	Needs Assessment, Gap Analysis & Audits Strategic Plans Design, Procurement & Implementation Management Business Continuity & Disaster Recovery Planning Capacity Planning & Forecasting Operations Planning Enterprise Architecture, Network Systems, Services & Cabling Infrastructure Planning Outsourcing Analysis & Planning for Colocation, XaaS or Cloud Services	Design Consultant, Contractor & Commissioning Vendor Qualification & RFP Development Reliability Analysis Design Peer Review Site Assessments & Planning Facility Assessments & Audits Space, Power & Cooling Capacity & Redundancy Planning Commissioning Management Standard Operating, Maintenance & Emergency Response Procedures

View Philip Isaak's Expert Witness Profile.

Joseph A. LaRovere, CEM, has over 35 years of experience as a contractor, owner/operator, technician, and consultant to the construction industry with specialties in HVAC, Mechanical, Electrical, Plumbing, Energy Management and Control Systems. He works with clients that are experiencing operational issues, difficulty finding the right team members, need help with business processes, or just need an objective executive coach to help them get to the next level.

Business Consulting Services:

• HVAC Systems, air conditioning, heat pumps, chiller plants, heating hot water, boilers, air handlers, water source heat pumps, cooling towers, dedicated outside air, ventilation, and exhaust systems
• Energy management and control system, sequence of operation, energy management and building efficiency
• Domestic hot water systems, electric and gas boilers and water heaters, mixing valves and hot water recirculation systems
• System failures, equipment failures, maintenance issues, preventative maintenance, water treatment, forensic investigation, and remediation
• Project Management, Program Management, Project Accounting, and Scheduling consulting and analysis
• Contractor Evaluation, Contract Review, Contractor Standard of Care, Engineering Evaluation, Site Inspections, and Retro commissioning

Certifications:

• C.E.M. - Certified Energy Manager
• Honeywell Tridium Niagara AX
• Honeywell Tridium Niagara 4
• Johnson Controls Facility Explorer

View Joseph LaRovere's Expert Witness Profile.

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

---

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine.  We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects.  Mr. Carter is proficient in the use of Primavera P6 and P3 software, and he has extensive experience in assessing the impact to engineering and construction works of RFIs, change orders and other events.  Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

Mobius Consulting is a Mobile and Wireless Technology management consulting firm. The industry and academic professionals at Mobius offer diverse services leveraging their extensive experience and expertise in enterprise and vertical markets including telecom, healthcare, energy, transportation, government, supply chain and logistics.

Consulting Services Include:

Technology and Product Strategy Network Architecture Design System Analysis Modeling and Simulations Algorithms Development RF Site Survey Point-to-point / Point-to-multi-point Backhaul Design Vetting New Concepts

Product Development / Rapid Prototyping System Integration and Deployment Research / Position / Marketing White Papers Product Evaluation / Competitive Analysis RFI / RFP Development / Processing Education and Training Intellectual Property / Patent Assistance Expert Witness

Principal, Jacob Sharony, PhD, MBA, has over 25 years of experience in Mobile and Wireless Technologies. He is currently an adjunct professor at Columbia University, teaching wireless technologies and applications. He also served as a faculty member of the electrical and computer engineering department and director of the Center of Excellence in Wireless and Information Technology at Stony Brook University. Dr. Sharony held engineering and management positions in diverse technology disciplines at Time Warner Cable, Motorola, BAE Systems, NEC Research Institute, and IBM Research. He has over 50 US patents (pending and issued) and has served on several government expert panels. Dr. Sharony has also published extensively in scientific journals and conferences.

View Dr. Sharony's Expert Witness Profile.

Dr. Kanellakopoulos is a Technology leader with 25+ years of experience in R&D, operations, administration, and management, in both academia and industry. He has authored or co-authored books, numerous articles in peer-reviewed technical journals and refereed technical conferences, and multiple standards contributions. He is also the co-inventor on more than 25 patents. He has been the plenary speaker at major technical conferences, and an invited speaker at more than 40 industrial and academic venues in 12 countries across 4 continents.

In his industrial career, he Designed and Built Telecom Products such as DSL and Carrier Ethernet hardware and software, and has significant experience with international telecommunication standards (ITU-T). He has also worked in wireless communications (3GPP, Wi-Fi), primarily on digital signal processing methods for baseband transceivers.

In his academic career, Dr. Kanellakopoulos conducted research on adaptive control of nonlinear systems, with applications to automotive control systems, specifically ADAS (adaptive cruise control, blind spot monitoring, lane keeping, vehicle collision avoidance) and active suspension. He directed a project on automation of heavy-duty vehicles as part of the California PATH Program; one of the most visible results of this research was the “Variable Time-Headway” algorithm for adaptive cruise control, which was demonstrated on a fully-automated heavy-duty (Class 8) 18-wheeler truck and has found widespread use in current adaptive cruise control systems. His UCLA team also designed and built a prototype full-size fully-automated electric vehicle that has been used for research purposes on multiple college campuses.

Dr. Kanellakopoulos has directed collaborative projects with several automotive/truck manufacturers and vendors (Ford, Mercedes-Benz, DaimlerChrysler, Freightliner, Gentex, Visteon).

He has consulted for clients such as technology companies (on intellectual property strategy and product development), private equity firms (on due diligence for investment), and law firms (on expert witness matters).

He is an IEEE Fellow and a recipient of multiple national and international awards.

View Dr. Kanellakopoulos's Expert Witness Profile.

Robert O. Peruzzi, PhD, PE is a Licensed Professional Electrical Engineer with particular expertise in Mixed-Signal Integrated Circuits (MSICs). His subspecialty within this broad category is with Integrated Circuits (silicon chips) used for signal-processing. Dr. Peruzzi's recent clients include Quantenna Communications, Wavefront Research, LSI, Berkeley Design Automation, among others. Examples of Signal Processing Systems:

• Telephones, mobile phones, cell phones
• Data recording and retrieving systems for magnetic media such as disk drives
• Radio transmitters / receivers - low noise amplifiers, filters, automatic gain control and frequency mixers
• Audio amplifiers
• Audio recording / reproduction systems
• Heat, ventilation, air conditioning controllers
• Data transmitting / receiving systems

Areas of Expertise:

• Behavioral modeling of analog/mixed-signal circuits using Verilog-AMS, VHDL-AMS or MATLAB/Simulink
• Specific verification requirements
• High-speed verification using real-value modeling techniques
• System-level design exploration
• Executable design specs

View Expert Witness Profile.

Expert Background: Dr. Thomas L. Read is the Principal and CEO at A. Read Consulting, LLC. He received his PhD. from Stanford University in 1972 and has over 25 years of manufacturing experience in electronics, metallurgy, factory safety, failure analysis, glass fracture, glass failure and bottle failure. As a member of the electronics industry, he has earned process patents and has an extensive background in manufacturing techniques. In parallel, Dr. Read has spent over twenty five years as a consultant to attorneys and engineers. He has given more than 100 depositions and has appeared in court numerous times. Company Profile: Read Consulting, LLC is a full service laboratory providing services in the following areas:

• Failure Analysis; Factory Safety and Personal Injury (including machine guards and manufacturing safety)
• Glass Failure Analysis - Glass Fracture, Glass Failures and Bottle Failure
• Metal and Ceramic Failure
• Grinding Wheel Failures
• Intellectual Property and Patent Disputes
• Product Liability and Product Quality
• Manufacturing Disagreements (such as Intellectual Property, Failed equipment and Contract Disputes)
• Reverse Engineering

Since 1988, Real-World Forensic Engineering, LLC ("RWFE") has provided engineering services to industries and government labs, as well as litigation support to both plaintiff and defense attorneys practicing in many areas.

RWFE Areas of Expertise Include:

Components & Machinery Metallurgy & Corrosion Dynamics of Impact & Collisions Friction Analysis / Slips, Trips and Falls Intellectual Property & Patent Review Accident Reconstruction / Animation Computer Aided Design Education & Training

Electrocution & Switch Malfunction Grounding & Lightning Protection Lightning Impulse Testing Products and Premises Liability & Safety High-Voltage & Current Power Systems Bridge Design and Safety Fire & Explosion Cause and Origin And Much More...

At RWFE, we proudly distinguish ourselves by our Four C's:

CREDENTIALS. COMPETENCE. CREDIBILITY. COMMUNICATION.

Credentials:	B.S., M.S., M.Eng., M.B.A., J.D., and Ph.D. Degrees Licensed Professional Engineers in Mechanical, Electrical, and Civil Engineering Tenured University Professors and Professionals NAFI Certified Fire and Explosion Investigators (CFEI) Licensed Master Electricians
Competence:	Over 80 Combined Years of Experience in Engineering R&D, Industry, Academia, Consulting, and Expert Witness Litigation Support Over 120 Combined Deposition and Court Testimonies
Credibility:	Internationally Recognized in Our Areas of Expertise More Than $19 Million in Peer-reviewed and Funded Research Grants Over 200 Combined Scientific Publications and Journal Articles
Communication:	Over 20 Different Undergraduate and Graduate-level University Courses Over 30 Invited Short Courses, Talks, and Lectures

Design Evaluation – Accident Investigation – Intellectual Property - Failure Analysis – Fire Cause & Origin – Component Testing - Computer Aided Drafting – Accident Animation - Expert Witness & Litigation Support

www.ExpertEngineering.com