1 Source Safety and Health, Inc. is a Safety and Health Management and Consulting firm for educational, insurance, commercial, residential, research, healthcare, and manufacturing facilities. 1Source’s team of professionals includes certified industrial hygienists, certified safety professionals, certified professional environmental auditors, and a certified professional ergonomist who can address every safety and health issue. One key measure of their success is that 1Source is the largest safety and health consulting firm with the most certified staff on the east coast. For more than 20 years, the professionals at 1Source have been committed to developing long-term, mutually beneficial professional relationships with our clients and business partners. Indoor Air Quality Management and Consultation:
Safety Management Systems:
Asbestos and Lead Management and Consultation:
Kenneth J. Shorter, MS, CSP, ARM, TCDS, is the President of Accident Prevention & Investigation, Inc., a professional corporation set up to provide Safety Consulting Services, management evaluations, accident investigation, training, and forensic services. Mr. Shorter has over 30 years of experience Managing Safety for local, regional, and national organizations in the fields of construction, general industry, fleet, government, and marine operations.
Mr. Shorter has his Masters Degree in Safety and Professional Certifications in Safety, Risk Management, and Traffic Control Design. An ANSI A10 Standards Committee Member for Construction and Demolition Operations, Mr. Shorter has extensive experience managing safety on large projects constructing buildings, roadways, rapid transit systems, tunnels, bridges, hospitals, etc.
Consulting Services Include:
Adler Engineers, Inc.was established on June 14, 1990 as a Civil / Geotechnical Engineering and Environmental Consulting firm to provide quality services for public and private clients in a highly competitive environment. Adler performs Site, Civil, Structural and Geotechnical Engineering tasks as well as Environmental Consulting, Expert Witness, and Forensic Engineering services including:
Julian M. Toneatto, PhD, PE, PP, President of Adler Engineers, Inc., has over 40 years of experience in Civil, Structural, and Environmental Engineering Consulting. Dr. Toneatto has a Doctorate in Structures and Dynamics and MBA in Finance. His former employers include the Department of Defense, U.S. Army Corps of Engineers, States, Municipalities, DOT, private and public firms, and the EXXON Corporation.
Dr. Toneatto served as a Professor of Civil Engineering and Course Director at the Department of Civil Engineering, U.S. Military Academy. He structured, revised, and taught courses in Advanced Structural Analysis, the Honors Course in Structural Analysis and Steel Design, and authored and taught Soil Mechanics. Dr. Toneatto has also served on the faculty at USMA (West Point): Department of Civil and Mechanical Engineering, Philadelphia University and The US Army Engineer School at Fort Leonard Wood, MO.
|Investigative Engineering||Preventive Engineering|
|Safety / Ergonomics||Consulting Engineering|
Analytic Engineering combines Professional Engineering with Effective Communication. We offer Technical Analysis and Services in the Engineering field and provide experienced Expert Testimony to communicate the conclusions reached.
Steven R. Thomas, PE, the Principal Engineer at Analytic Engineering, earned his Bachelor of Science - Engineering (Mechanical and Electrical) at Widener University, Chester, PA in 1979 and a Master of Science in Engineering Science (Safety Engineering and Human Factors) at The New Jersey Institute of Technology in 1997.
Professional Experience: Steven R. Thomas, P.E. has worked for such organizations as General Motors, Thomas & Betts, General Cable and Breed Automotive Corporation. He has worked in the engineering fields of Research and Development, Product Design, Machine Design, Manufacturing, Industrial, Tooling, Safety, Facility Design, Failure Analysis and Accident Reconstruction. Since 1991 Mr. Thomas has worked as an Engineering Consultant in the Forensic field and has testified in numerous jurisdictions.
|New Jersey Office:|
55 Madison Avenue - Ste 400
Morristown, NJ 07960
T: (973) 401-0010
F: (973) 401-0056
|New Hampshire Office:|
105 Juniper Ridge Road
Gilford, NH 03249
T: (603) 293-4477
F: (603) 293-4142
Peter Petrovsky, PE, CE, ME , has provided services as a consultant and an expert witness in applied Civil and Mechanical Engineering Science, Building, Infrastructure, and Earthwork Contracting. His strength and experience is to successfully combine engineering and applied mechanics with the field experience and contracting skills. He packages civil, mechanical engineering, as well as, general, engineering, earthwork and paving and hazardous waste contracting into one package for the use of his clients. His services also include construction job site safety in fire prevention and personnel protection.
Litigation Support - Mr. Petrovsky's shirtsleeve approach to problem solving gives him the ability to distill complex technical issues to a palatable presentation in the appropriate forum. Serving the legal industry for 25 years, he has been retained in over 600 plaintiff and defense cases, been deposed over 200 times, and given testimony approximately 100 times. Mr. Petrovsky's services include testing and analysis, trial preparation case analysis, deposition review and expert summary, evidence presentation, consulting, report writing, court exhibits, static and computer depictions, construction and engineering contract analysis, accident reconstruction, and interpretation of administrative regulations. He has assisted counsel on cases in California, New York, Indiana, Pennsylvania, Hawaii, Kentucky, and Nevada.
Areas of Expertise:
B.E.C. Consulting, LLC was established in 1982. Since that time, we have provided top-level consulting engineering services and accident reconstruction to our clients; law firms, insurance companies, state and local agencies, manufacturing companies, and clients who are seeking product design analysis and other engineering related services. Our engineers represent a broad range of engineering disciplines which enables us to work on a variety of cases using the team approach. The teams at B.E.C are comprised of Engineers, Technical Specialists, Graphics Specialists, as well as Research and Administrative Personnel, so that each case is given personal attention and is handled efficiently and effectively. Our offices are located in Tallahassee, Jacksonville and Venice working in almost every state in the United States, including Alaska.
Areas of Expertise:
Every aspect of our firm is designed to serve our clients needs; conference rooms for mediations and depositions, a research and testing lab, secured evidence storage, facilities for expert inspections, and easy access to airport and hotel facilities for our out-of-town clients. We are truly a full service engineering firm. Because of this team approach and a commitment to customer service, B.E.C. has attained regional and national recognition as a leader in forensic engineering services and new product development. This excellent example and tireless dedication to serving our client’s needs has resulted in a devoted client base and reputation second to none.
Dr. Charles Benedict, P.E., founded Benedict Engineering Company in 1982 and our name has since changed to B.E.C. Consulting, LLC. He has over 35 years experience in the fields of product and machine design and analysis, vehicular accident reconstruction of all types, and product and system failure analysis. He has designed, developed, manufactured, and tested more than sixty different products and machine systems. Dr. Benedict is well respected in the fields of forensic engineering, product and machine system design and analysis and patenting.
|- Piping & pipe supports|
- Structural failure of products
- Failure analysis
- Industrial asbestos
- Seismic analysis
- Fire protection
- Pressure vessels
- Heat transfer analysis
- Environmental qualification of equipment
- Product design
- Patent information
Dr. Kevin A. Rider, PhD, PE, CPE of Forensic Human Factors, LLC., providing investigations and expert testimony regarding predictable human behavior, particularly as it relates to motor vehicle and pedestrian collisions, premises liability, and slips, trips and falls, the design and use of products, and adequacy of warnings/instructions. His work focuses on identifying the Human Factors Elements that lead to unfortunate incidents, and what should have been done to prevent them.
Dr. Rider is a Licensed Professional Engineer and Certified Professional Ergonomist, and has studied human movements and behavior, and served as a human factors consultant since 1999, including five years teaching industrial engineering and occupational safety courses at West Virginia University. He has presented at professional conferences, both nationally and abroad, and his research is published and cited in a number of peer-reviewed journals. He continues to serve as a reviewer for conference and journal manuscripts.
Dr. Rider has testified over 100 times, and excels at educating attorneys and jurors. His services are available to attorneys for both Plaintiff and Defense.
Areas of Expertise: